Concurrent Multi-Target Laser Ablation for Making Nano-Composite Films

New method of using laser ablation for film deposition that can be called as concurrent multi-beam multi-target matrix-assisted pulsed laser evaporation and pulsed laser deposition (MBMT-MAPLE/PLD) is described. Practical MBMT-MAPLE/PLD system built at Dillard University has three separate laser beams, three targets and the remotely controlled plume overlapping mechanism that provides even mixing of the target materials during their deposition on the substrate. The system accommodates MAPLE targets in the form of polymer solutions frozen with flowing liquid nitrogen. The feasibility of the method was demonstrated when it was used for making polymer nano-composite films with two inorganic additives: upconversion fluorescent phosphor NaYF4:Yb3+, Er3+ and aluminum-doped ZnO (AZO). Three laser beams, an infrared 1064-nm beam for the MAPLE and two 532-nm beams for the PLD targets, were concurrently used in the process. The fabricated nano-composite films were characterized using X-ray diffraction, scanning electron microscopy (SEM), optical fluorescent spectroscopy, and the measurement of the quantum efficiency (QE) of the upconversion fluorescence. The size of the inorganic nanoparticles varied in the range 10–200 nm. The AZO additive increased QE by 1.6 times. The conclusion was made on the feasibility of MBMT-MAPLE/PLD method for making multi-component nano-composite films for various applications

Gravitational Effects on Closed-Cellular-Foam Microstructure

Polyurethane foam has been produced in low gravity for the first time. The cause and distribution of different void or pore sizes are elucidated from direct comparison of unit-gravity and low-gravity samples. Low gravity is found to increase the pore roundness by 17% and reduce the void size by 50%. The standard deviation for pores becomes narrower (a more homogeneous foam is produced) in low gravity. Both a Gaussian and a Weibull model fail to describe the statistical distribution of void areas, and hence the governing dynamics do not combine small voids in either a uniform or a dependent fashion to make larger voids. Instead, the void areas follow an exponential law, which effectively randomizes the production of void sizes in a nondependent fashion consistent more with single nucleation than with multiple or combining events

Cold Atmospheric Pressure Plasma Jet and Plasma Lamp Interaction with Plants: Electrostimulation, Reactive Oxygen and Nitrogen Species, and Side Effects

Cold atmospheric pressure plasma (CAPP) treatment is a highly effective method of protecting seeds, plants, flowers, and trees from diseases and infection and significantly increasing crop yields. Here we found that cold atmospheric pressure He-plasma jet (CAPPJ) can also cause side effects and damage to plants if the plasma exposure time is too long. Reactive oxygen and nitrogen species (RONS), electromagnetic fields, and ultraviolet photons emitted by CAPPJ can cause both positive and negative effects on plants. CAPPJ can interact with biological tissue surfaces. The plasma lamp has no visible side effects on Aloe vera plants, cabbage, and tomatoes. A plasma lamp and a cold atmospheric pressure plasma He-jet cause strong electrical signaling in plants with a very high amplitude with frequencies equal to the frequency of plasma generation. The use of plasma lamps for electrostimulation of biological tissues can help to avoid side processes in biological tissues associated with the generation of RONS, UV photons, and direct interaction with cold plasma. CAPP technology can play an important role in agriculture, medicine, the food industry, chemistry, surface science, material science, and engineering applications without side effects if the plasma exposure is short enough

Lipid Bilayer Membrane in a Silicon Based Micron Sized Cavity Accessed by Atomic Force Microscopy and Electrochemical Impedance Spectroscopy

Supported lipid bilayers (SLBs) are widely used in biophysical research to probe the functionality of biological membranes and to provide diagnoses in high throughput drug screening. Formation of SLBs at below phase transition temperature (Tm) has applications in nano-medicine research where low temperature profiles are required. Herein, we report the successful production of SLBs at above—as well as below—the Tm of the lipids in an anisotropically etched, silicon-based micro-cavity. The Si-based cavity walls exhibit controlled temperature which assist in the quick and stable formation of lipid bilayer membranes. Fusion of large unilamellar vesicles was monitored in real time in an aqueous environment inside the Si cavity using atomic force microscopy (AFM), and the lateral organization of the lipid molecules was characterized until the formation of the SLBs. The stability of SLBs produced was also characterized by recording the electrical resistance and the capacitance using electrochemical impedance spectroscopy (EIS). Analysis was done in the frequency regime of 10−2–105 Hz at a signal voltage of 100 mV and giga-ohm sealed impedance was obtained continuously over four days. Finally, the cantilever tip in AFM was utilized to estimate the bilayer thickness and to calculate the rupture force at the interface of the tip and the SLB. We anticipate that a silicon-based, micron-sized cavity has the potential to produce highly-stable SLBs below their Tm. The membranes inside the Si cavity could last for several days and allow robust characterization using AFM or EIS. This could be an excellent platform for nanomedicine experiments that require low operating temperatures

Redox Reactions of Biologically Active Molecules upon Cold Atmospheric Pressure Plasma Treatment of Aqueous Solutions

Cold atmospheric pressure plasma (CAPP) is widely used in medicine for the treatment of diseases and disinfection of bio-tissues due to its antibacterial, antiviral, and antifungal properties. In agriculture, CAPP accelerates the imbibition and germination of seeds and significantly increases plant productivity. Plasma is also used to fix molecular nitrogen. CAPP can produce reactive oxygen and nitrogen species (RONS). Plasma treatment of bio-tissue can lead to numerous side effects such as lipid peroxidation, genotoxic problems, and DNA damage. The mechanisms of occurring side effects when treating various organisms with cold plasma are unknown since RONS, UV-Vis light, and multicomponent biological tissues are simultaneously involved in a heterogeneous environment. Here, we found that CAPP can induce in vitro oxidation of the most common water-soluble redox compounds in living cells such as NADH, NADPH, and vitamin C at interfaces between air, CAPP, and water. CAPP is not capable of reducing NAD+ and 1,4-benzoquinone, despite the presence of free electrons in CAPP. Prolonged plasma treatment of aqueous solutions of vitamin C, 1,4-hydroquinone, and 1,4-benzoquinone respectively, leads to their decomposition. Studies of the mechanisms in plasma-induced processes can help to prevent side effects in medicine, agriculture, and food disinfection

Electrophysiology of Epithelial Sodium Channel (ENaC) Embedded in Supported Lipid Bilayer Using a Single Nanopore Chip

Nanopore-based technologies are highly adaptable supports for developing label-free sensor chips to characterize lipid bilayers, membrane proteins, and nucleotides. We utilized a single nanopore chip to study the electrophysiology of the epithelial Na⁺ channel (ENaC) incorporated in supported lipid membrane (SLM). An isolated nanopore was developed inside the silicon cavity followed by fusing large unilamellar vesicles (LUVs) of DPPS (1,2-dipalmitoyl-<i>sn</i>-glycero-3-phosphoserine) and DPPE (1,2-dipalmitoyl-<i>sn</i>-glycero-3-phosphoethanolamine) to produce a solvent-free SLM with giga-ohm (GΩ) sealed impedance. The presence and thickness of SLM on the nanopore chip were confirmed using atomic force spectroscopy. The functionality of SLM with and without ENaC was verified in terms of electrical impedance and capacitance by sweeping the frequency from 0.01 Hz to 100 kHz using electrochemical impedance spectroscopy. The nanopore chip exhibits long-term stability for the lipid bilayer before (144 h) and after (16 h) incorporation of ENaC. Amiloride, an inhibitor of ENaC, was utilized at different concentrations to test the integrity of fused ENaC in the lipid bilayer supported on a single nanopore chip. The developed model presents excellent electrical properties and improved mechanical stability of SLM, making this technology a reliable platform to study ion channel electrophysiology

Polymer nanocomposite sunlight spectrum down-converters made by open-air PLD

We report, for the first time to our knowledge, on the polymer nanocomposite sunlight spectrum down-converters made by the concurrent multi-beam multi-target pulsed laser deposition (CMBMT-PLD) of phosphor and polymer in ambient air. Phosphor PLD targets were made of down-converting rare-earth (RE)-doped fluorides NaYF4:Yb3+,Er3+, and NaYF4:Yb3+,Tm3+ with a Stokes shift of 620 nm (from 360 to 980 nm), minimizing the effect of re-absorption. The phosphors were synthesized by the wet method. Polymer target was made of poly (methyl methacrylate) known as PMMA. Target ablation was conducted with 1,064 nm beams from an Nd:YAG Q-switched laser. Beam intensity was 2.8 × 1016 W/cm2 for both targets. The substrate was a microscope glass slide. Phosphor nanoparticles with a size ranging from 10 to 50 nm were evenly distributed in the polymer matrix during deposition. The nanoparticles retained the crystalline structure and the fluorescent properties of the phosphor target. There was no noticeable chemical decomposition of the deposited polymer. The products of laser-induced reaction of the polymer target with atmospheric gases did not reach the substrate during PLD. Post-heating of the substrate at ∼90°C led to fusion of separate polymer droplets into uniform coating. Quantum yield of the down-conversion polymer nanocomposite film was estimated to be not less than ∼5%. The proposed deposition method can find its application in making commercial-size down-converter coatings for photo-voltaic solar power applications