41,187 research outputs found
GIOTTO's antenna de-spin mechanism: Ots lubrication and thermal vacuum performance
Except in the near Earth phase of GIOTTO's mission to Comet Halley, the HGA (high gain antenna) on board GIOTTO was the only designed means of up/down communications. The spacecraft spin stabilization required that the HGA be despun at the same rotational rate of nominally 15 rpm in order to keep the HGA pointing accurately to a Earth. A dual servomotor despin mechanism was designed and built by SEP of France for this purpose. The expected thermal environment suggested that dry lubrication was preferable to wet for the ball bearings but there existed no relevant data on the torque noise spectrum of candidate solid lubricants. Therefore ad hoc torque noise tests were run with two solid lubricants: ion plated lead film plus lead bronze cage (retainer) and a PTFE composite cage only. The lead lubrication showed the better spectrum up to the mission lifetime point so it was selected for continued test over some 20 times the Halley mission life, with periodic torque spectrum monitoring. The spectrum remained well within the pointing error budget over the 100 million revolutions covered
Phosphorus-containing imide resins
Bis- and tris-imides derived from tris (m-aminophenyl) phosphine oxides by reaction with maleic anhydride or its derivatives, and addition polymers of such imides, including a variant in which a mono-imide is condensed with a dianhydride and the product is treated with a further quantity of maleic anhydride. Such monomers or their oligomes may be used to impregnate fibers and fabrics which when cured, are flame resistant. Also an improved method of producing tris (m-aminophenyl) phosphine oxides from the nitro analogues by reduction with hydrazine hydrate using palladized charcoal or Raney nickel as the catalyst is described
Elastomer-modified phosphorus-containing imide resins
Phosphine oxide-containing polyimide resins modified by elastomers, are disclosed which have improved mechanical properties. These products are particularly useful in the production of fiber or fabric-reinforced composites or laminates
Phosphorus-containing bisimide resins
The production of fire-resistant resins particularly useful for making laminates with inorganic fibers such as graphite fibers is discussed. The resins are by (1) condensation of an ethylenically unsaturated cyclic anhydride with a bis(diaminophenyl) phosphine oxide, and (2) by addition polymerization of the bisimide so obtained. Up to about 50%, on a molar basis, of benzophenonetetracarboxylic acid anhydride can be substituted for some of the cyclic anhydride to alter the properties of the products. Graphite cloth laminates made with these resins show 800 C char yields greater than 70% by weight in nitrogen. Limiting oxygen indexes of more than 100% are determined for these resins
Phosphorus-containing imide resins
Cured polymers of bis and tris-imides derived from tris(m-aminophenyl) phosphine oxides by reaction with maleic anhydride or its derivatives, and addition polymers of such imides, including a variant in which a monoimide is condensed with a dianhydride and the product is treated with a further quantity of maleic anhydride prior to curing are disclosed and claimed. Such polymers are flame resistant. Also disclosed are an improved method of producing tris(m-aminophenyl) phosphine oxides from the nitro analogues by reduction with hydrazine hydrate using palladized charcoal or Raney nickel as the catalyst and fiber reinforced cured resin composites
Improving continence services for older people from the service-providers' perspective: a qualitative interview study
This is an Open Access article distributed in accordance with the Creative Commons Attribution Non Commercial (CC BY-NC 3.0) license, which permits others to distribute, remix, adapt, build upon this work non-commercially, and license their derivative works on different terms, provided the original work is properly cited and the use is non-commercial.Objective To examine in depth the views and experiences of continence service leads in England on key service and continence management characteristics in order to identify and to improve our understanding of barriers to a good-quality service and potential facilitators to develop and to improve services for older people with urinary incontinence (UI). Design Qualitative semistructured interviews using a purposive sample recruited across 16 continence services. Setting 3 acute and 13 primary care National Health Service Trusts in England. Participants 16 continence service leads in England actively treating and managing older people with UI. Results In terms of barriers to a good-quality service, participants highlighted a failure on the part of commissioners, managers and other health professionals in recognising the problem of UI and in acknowledging the importance of continence for older people and prevalent negative attitudes towards continence and older people. Patient assessment and continence promotion regardless of age, rather than pad provision, were identified as important steps for a good-quality service for older people with UI. More rapid and appropriate patient referral pathways, investment in service capacity, for example, more trained staff and strengthened interservice collaborations and a higher profile within medical and nurse training were specified as being important facilitators for delivering an equitable and high-quality continence service. There is a need, however, to consider the accounts given by our participants as perhaps serving the interests of their professional group within the context of interprofessional work. Conclusions Our data point to important barriers and facilitators of a good-quality service for older people with UI, from the perspective of continence service leads. Further research should address the views of other stakeholders, and explore options for the empirical evaluation of the effectiveness of identified service facilitators.Funding was received from the New Dynamics of Ageing Programme, led by the Economic & Social Research Council, UK (grantnumber RES-353-25-0010)
Recommended from our members
Brain Localisation of Memory Chunks in Chessplayers
Chess experts store domain-specific representations in their long-term memory; due to the activation of such representations, they perform with high accuracy in tasks that require the maintenance of previously seen information. Chunk-based theories of expertise (chunking theory: Chase & Simon, 1973; template theory: Gobet & Simon, 1996) state that expertise is acquired mainly by the acquisition and storage in long-term memory of familiar chunks that allow quick recognition. We tested some predictions of these theories by using fMRI while chessplayers performed a recognition memory task. These theories predict that chessplayers access long-term memory chunks of domain-specific information, which are presumably stored in the temporal lobes. We also predicted that the recognition memory tasks would activate working memory areas in the frontal and parietal lobes. These predictions were supported by the data
Observation of PT phase transition in a simple mechanical system
If a Hamiltonian is PT symmetric, there are two possibilities: Either the
eigenvalues are entirely real, in which case the Hamiltonian is said to be in
an unbroken-PT-symmetric phase, or else the eigenvalues are partly real and
partly complex, in which case the Hamiltonian is said to be in a
broken-PT-symmetric phase. As one varies the parameters of the Hamiltonian, one
can pass through the phase transition that separates the unbroken and broken
phases. This transition has recently been observed in a variety of laboratory
experiments. This paper explains the phase transition in a simple and intuitive
fashion and then describes an extremely elementary experiment in which the
phase transition is easily observed.Comment: 9 pages, 9 figure
Statistical Study of the Reconnection Rate in Solar Flares Observed with YOHKOH/SXT
We report a statistical study of flares observed with the Soft X-ray
Telescope (SXT) onboard Yohkoh in the year of 2000. We measure physical
parameters of 77 flares, such as the temporal scale, the size, and the magnetic
flux density and find that the sizes of flares tend to be distributed more
broadly as the GOES class becomes weaker and that there is a lower limit of
magnetic flux density that depends on the GOES class. We also examine the
relationship between these parameters and find weak correlation between
temporal and spatial scales of flares. We estimate reconnection inflow
velocity, coronal Alfven velocity, and reconnection rate using above observed
values. The inflow velocities are distributed from a few km/s to several tens
km/s and the Alfven velocities in the corona are in the range from 10^3 to 10^4
km/s. Hence the reconnection rate is 10^-3 - 10^-2. We find that the
reconnection rate in a flare tends to decrease as the GOES class of the flare
increases. This value is within one order of magnitude from the theoretical
maximum value predicted by the Petschek model, although the dependence of the
reconnection rate on the magnetic Reynolds number tends to be stronger than
that in the Petschek model.Comment: 21 pages, 8 figures, accepted for publication in Ap
- …