Atomic-scale combination of germanium-zinc nanofibers for structural and electrochemical evolution

Alloys are recently receiving considerable attention in the community of rechargeable batteries as possible alternatives to carbonaceous negative electrodes; however, challenges remain for the practical utilization of these materials. Herein, we report the synthesis of germanium-zinc alloy nanofibers through electrospinning and a subsequent calcination step. Evidenced by in situ transmission electron microscopy and electrochemical impedance spectroscopy characterizations, this one-dimensional design possesses unique structures. Both germanium and zinc atoms are homogenously distributed allowing for outstanding electronic conductivity and high available capacity for lithium storage. The as-prepared materials present high rate capability (capacity of similar to 50% at 20 C compared to that at 0.2 C-rate) and cycle retention (73% at 3.0 C-rate) with a retaining capacity of 546 mAh g(-1) even after 1000 cycles. When assembled in a full cell, high energy density can be maintained during 400 cycles, which indicates that the current material has the potential to be used in a large-scale energy storage system

Polarimetric Multi-View Inverse Rendering

A polarization camera has great potential for 3D reconstruction since the angle of polarization (AoP) of reflected light is related to an object's surface normal. In this paper, we propose a novel 3D reconstruction method called Polarimetric Multi-View Inverse Rendering (Polarimetric MVIR) that effectively exploits geometric, photometric, and polarimetric cues extracted from input multi-view color polarization images. We first estimate camera poses and an initial 3D model by geometric reconstruction with a standard structure-from-motion and multi-view stereo pipeline. We then refine the initial model by optimizing photometric and polarimetric rendering errors using multi-view RGB and AoP images, where we propose a novel polarimetric rendering cost function that enables us to effectively constrain each estimated surface vertex's normal while considering four possible ambiguous azimuth angles revealed from the AoP measurement. Experimental results using both synthetic and real data demonstrate that our Polarimetric MVIR can reconstruct a detailed 3D shape without assuming a specific polarized reflection depending on the material.Comment: Paper accepted in ECCV 202

Effect of local anesthetics on viability and differentiation of various adult stem/progenitor cells

Background Local anesthetics (LAs) are widely used to control pain during various clinical treatments. One of the side effects of LAs, cytotoxicity, has been investigated in various cells including stem/progenitor cells. However, our understanding of the effects of LAs on the differentiation capacity of stem/progenitor cells still remains limited. Therefore, a comparative study was conducted to investigate the effects of multiple LAs on viability and multi-lineage differentiation of stem/progenitor cells that originated from various adult tissues. Method Multiple types of stem/progenitor cells, including bone marrow mesenchymal stem/progenitor cells (MSCs), dental pulp stem/progenitor cells (DPSCs), periodontal ligament stem/progenitor cells (PDLSCs), and tendon-derived stem/progenitor cells, were either obtained from a commercial provider or isolated from adult human donors. Lidocaine (LD) and bupivacaine (BP) at various doses (1×, 0.75×, 0.5×, and 0.25× of each physiological dose) were applied to the different stem/progenitor cells for an hour, followed by induction of fibrogenic, chondrogenic, osteogenic, and adipogenic differentiation. Live/dead and MTT assays were performed at 24 h after the LD or BP treatment. At 2 weeks, qRT-PCR was conducted to evaluate the gene expressions associated with differentiation. After 4 weeks, multiple biochemical staining was performed to evaluate matrix deposition. Results At 24 h after LD or BP treatment, 1× and 0.75× physiological doses of LD and BP showed significant cytotoxicity in all the tested adult stem/progenitor cells. At 0.5×, BP resulted in higher viability than the same dose LD, with variance between cell types. Overall, the gene expressions associated with fibrogenic, chondrogenic, osteogenic, and adipogenic differentiation were attenuated in LD or BP pre-treated stem/progenitor cells, with notable dose-effect and dependence on types. In contrast, certain doses of LD and/or BP were found to increase specific gene expression, depending on the cell types. Conclusion Our data suggest that LAs such as LD and BP affect not only the viability but also the differentiation capacity of adult stem/progenitor cells from various anatomical sites. This study sheds light on stem cell applications for tissue regeneration in which isolation and transplantation of stem cells frequently involve LA administration

Towards the “ultimate earthquake-proof” building: Development of an integrated low-damage system

The 2010–2011 Canterbury earthquake sequence has highlighted the severe mismatch between societal expectations over the reality of seismic performance of modern buildings. A paradigm shift in performance-based design criteria and objectives towards damage-control or low-damage design philosophy and technologies is urgently required. The increased awareness by the general public, tenants, building owners, territorial authorities as well as (re)insurers, of the severe socio-economic impacts of moderate-strong earthquakes in terms of damage/dollars/ downtime, has indeed stimulated and facilitated the wider acceptance and implementation of cost-efficient damage-control (or low-damage) technologies. The ‘bar’ has been raised significantly with the request to fast-track the development of what the wider general public would hope, and somehow expect, to live in, i.e. an “earthquake-proof” building system, capable of sustaining the shaking of a severe earthquake basically unscathed. The paper provides an overview of recent advances through extensive research, carried out at the University of Canterbury in the past decade towards the development of a low-damage building system as a whole, within an integrated performance-based framework, including the skeleton of the superstructure, the non-structural components and the interaction with the soil/foundation system. Examples of real on site-applications of such technology in New Zealand, using concrete, timber (engineered wood), steel or a combination of these materials, and featuring some of the latest innovative technical solutions developed in the laboratory are presented as examples of successful transfer of performance-based seismic design approach and advanced technology from theory to practice

The impact of hyperhidrosis on patients' daily life and quality of life : A qualitative investigation

Background: An understanding of the daily life impacts of hyperhidrosis and how patients deal with them, based on qualitative research, is lacking. This study investigated the impact of hyperhidrosis on the daily life of patients using a mix of qualitative research methods. Methods: Participants were recruited through hyperhidrosis patient support groups such as the Hyperhidrosis Support Group UK. Data were collected using focus groups, interviews and online surveys. A grounded theory approach was used in the analysis of data transcripts. Data were collected from 71 participants, out of an initial 100 individuals recruited. Results: Seventeen major themes capturing the impacts of hyperhidrosis were identified; these covered all areas of life including daily life, psychological well-being, social life, professional /school life, dealing with hyperhidrosis, unmet health care needs and physical impact. Conclusions: Psychosocial impacts are central to the overall impacts of hyperhidrosis, cutting across and underlying the limitations experienced in other areas of life.Peer reviewe

Prescriptions patterns and appropriateness of usage of antibiotics in non-teaching community hospitals in South Korea: a multicentre retrospective study

Abstract Background Although non-teaching community hospitals form the majority of healthcare providers in South Korea, there is limited data on antibiotic usage in them. To evaluate the pattern of antibiotic usage and its appropriateness in hospitals with < 400 beds in South Korea. Methods A multicentre retrospective study was conducted in 10 hospitals (six long-term care hospitals, three acute care hospitals, and one orthopaedic hospital), with < 400 beds in South Korea. We analysed patterns of antibiotic prescription in 2019, and their appropriateness in the participating hospitals. For the evaluation of the appropriateness of the prescription, 25 patients under antibiotic therapy were randomly selected at each hospital, over two separate periods. Due to the heterogeneity of their characteristics, the orthopaedics hospital was excluded from the analysis. Results The most commonly prescribed antibiotics in long-term care hospitals was fluoroquinolone, followed by beta-lactam/beta-lactamase inhibitor (anti-pseudomonal). In acute care hospitals, these were third generation cephalosporin, followed by first generation cephalosporin, and second generation cephalosporin. The major antibiotics that were prescribed in the orthopedics hospital was first generation cephalosporin Only 2.3% of the antibiotics were administered inappropriately. In comparison, 15.3% of patients were prescribed an inappropriate dose. The proportion of inappropriate antibiotic prescriptions was 30.6% of the total antibiotic prescriptions. Conclusions The antibiotic usage patterns vary between non-teaching community hospitals in South Korea. The proportion of inappropriate prescriptions exceeded 30% of the total antibiotic prescriptions

Age-related delay in information accrual for faces: Evidence from a parametric, single-trial EEG approach

Background: In this study, we quantified age-related changes in the time-course of face processing by means of an innovative single-trial ERP approach. Unlike analyses used in previous studies, our approach does not rely on peak measurements and can provide a more sensitive measure of processing delays. Young and old adults (mean ages 22 and 70 years) performed a non-speeded discrimination task between two faces. The phase spectrum of these faces was manipulated parametrically to create pictures that ranged between pure noise (0% phase information) and the undistorted signal (100% phase information), with five intermediate steps. Results: Behavioural 75% correct thresholds were on average lower, and maximum accuracy was higher, in younger than older observers. ERPs from each subject were entered into a single-trial general linear regression model to identify variations in neural activity statistically associated with changes in image structure. The earliest age-related ERP differences occurred in the time window of the N170. Older observers had a significantly stronger N170 in response to noise, but this age difference decreased with increasing phase information. Overall, manipulating image phase information had a greater effect on ERPs from younger observers, which was quantified using a hierarchical modelling approach. Importantly, visual activity was modulated by the same stimulus parameters in younger and older subjects. The fit of the model, indexed by R2, was computed at multiple post-stimulus time points. The time-course of the R2 function showed a significantly slower processing in older observers starting around 120 ms after stimulus onset. This age-related delay increased over time to reach a maximum around 190 ms, at which latency younger observers had around 50 ms time lead over older observers. Conclusion: Using a component-free ERP analysis that provides a precise timing of the visual system sensitivity to image structure, the current study demonstrates that older observers accumulate face information more slowly than younger subjects. Additionally, the N170 appears to be less face-sensitive in older observers

Improved Siderotic Nodule Detection in Cirrhosis with Susceptibility-Weighted Magnetic Resonance Imaging: A Prospective Study

BACKGROUND: Hepatic cirrhosis is a common pathway of progressive liver destruction from multiple causes. Iron uptake can occur within the hepatic parenchyma or within the various nodules that form in a cirrhotic liver, termed siderotic nodules. Siderotic nodule formation has been shown to correlate with inflammatory activity, and while the relationship between siderotic nodule formation and malignancy remains unclear, iron distribution within hepatic nodules has known implications for the detection of hepatocellular carcinoma. We aimed to evaluate the role of abdominal susceptibility-weighted imaging in the detection of siderotic nodules in cirrhotic patients. METHODOLOGY/PRINCIPAL FINDINGS: Forty-six (46) cirrhotic patients with at least one siderotic nodule detected on previous imaging underwent both computed tomography and magnetic resonance imaging (T1-, T2-, T2*-, and susceptibility-weighted imaging) at 3.0 Tesla. Imaging data was independently analyzed by two radiologists. Siderotic nodule count was determined for each modality and imaging sequence. For each magnetic resonance imaging technique, siderotic nodule conspicuity was assessed on a 3 point scale (1 = weak, 2 = moderate, 3 = strong). More nodules were detected by susceptibility weighted imaging (n = 2935) than any other technique, and significantly more than by T2* weighted imaging (n = 1696, p<0.0001). Lesion conspicuity was also highest with susceptibility-weighted imaging, with all nodules found to be moderate (n = 6) or strong (n = 40); a statistically significant difference (p<0.001). CONCLUSIONS: Susceptibility-weighted imaging had the greatest lesion conspicuity and detected the highest number of siderotic nodules suggesting it is the most sensitive imaging technique to detect siderotic nodules in cirrhotic patients

Seed-mediated atomic-scale reconstruction of silver manganate nanoplates for oxygen reduction towards high-energy aluminum-air flow batteries

Aluminum-air batteries are promising candidates for next-generation high-energy-density storage, but the inherent limitations hinder their practical use. Here, we show that silver nanoparticle-mediated silver manganate nanoplates are a highly active and chemically stable catalyst for oxygen reduction in alkaline media. By means of atomic-resolved transmission electron microscopy, we find that the formation of stripe patterns on the surface of a silver manganate nanoplate originates from the zigzag atomic arrangement of silver and manganese, creating a high concentration of dislocations in the crystal lattice. This structure can provide high electrical conductivity with low electrode resistance and abundant active sites for ion adsorption. The catalyst exhibits outstanding performance in a flow-based aluminum-air battery, demonstrating high gravimetric and volumetric energy densities of similar to 2552 Wh kg(Al)(-1) and similar to 6890 Wh I-Al(-1) at 100 mA cm(-2), as well as high stability during a mechanical recharging process

A hysteretic multiscale formulation for nonlinear dynamic analysis of composite materials

This article has been made available through the Brunel Open Access Publishing Fund.A new multiscale finite element formulation is presented for nonlinear dynamic analysis of heterogeneous structures. The proposed multiscale approach utilizes the hysteretic finite element method to model the microstructure. Using the proposed computational scheme, the micro-basis functions, that are used to map the microdisplacement components to the coarse mesh, are only evaluated once and remain constant throughout the analysis procedure. This is accomplished by treating inelasticity at the micro-elemental level through properly defined hysteretic evolution equations. Two types of imposed boundary conditions are considered for the derivation of the multiscale basis functions, namely the linear and periodic boundary conditions. The validity of the proposed formulation as well as its computational efficiency are verified through illustrative numerical experiments