Monitoring monkeypox virus in saliva and air samples in Spain: a cross-sectional study

Background: The transmission of monkeypox virus occurs through direct contact, but transmission through saliva or exhaled droplets and aerosols has not yet been investigated. We aimed to assess the presence of monkeypox virus DNA and infectious virus in saliva samples and droplets and aerosols exhaled from patients infected with monkeypox virus. Methods: We did a cross-sectional study in patients with monkeypox confirmed by PCR who attended two health centres in Madrid, Spain. For each patient, we collected samples of saliva, exhaled droplets within a mask, and aerosols captured by air filtration through newly developed nanofiber filters. We evaluated the presence of monkeypox virus in the samples by viral DNA detection by quantitative PCR (qPCR) and isolation of infectious viruses in cell cultures. Findings: Between May 18 and July 15, 2022, 44 patients with symptomatic monkeypox attended two health centres in Madrid and were included in the study. All were cisgender men, with a median age of 35·0 years (IQR 11·3). We identified high loads of monkeypox virus DNA by qPCR in 35 (85%) of 41 saliva samples. Infectious monkeypox virus was recovered from 22 (67%) of 33 saliva samples positive for monkeypox virus DNA. We also found a significant association between the number of affected cutaneous areas or general symptoms and the viral load present in saliva samples. Droplets exhaled from patients with monkeypox, detected inside a mask, contained monkeypox virus DNA in 32 (71%) of 45 samples, with two of the 32 positive samples showing the presence of the infectious virus. Monkeypox virus DNA in aerosols, collected from the medical consultation room, were detected in 27 (64%) of 42 samples, despite patients wearing an FFP2 mask during the visit. Infectious virus was not recovered from aerosol samples. High levels of monkeypox virus DNA were identified in aerosols collected from a hospital isolation room housing a patient with monkeypox. Interpretation: The identification of high viable monkeypox virus loads in saliva in most patients with monkeypox and the finding of monkeypox virus DNA in droplets and aerosols warrants further epidemiological studies to evaluate the potential relevance of the respiratory route of infection in the 2022 monkeypox virus outbreak.This study was funded by the EU (Nextgeneration EU), Consejo Superior de Investigaciones Científicas (PTI Salud Global), and Ciberinfec (Acción estratégica MKPXV22). We thank Milagros Guerra and the Electron Microscopy Service at CBMSO for their support. We thank the contribution of Grupo Viruela Simio Madrid ISCIII/HCSC/Sandoval.S

Bioavailability enhancement of nanostructured microparticles of carvedilol

A high throughput encapsulation technique termed as electrospraying assisted by pressurized gas technology (EAPG) was used to produce nano-within-micro structures of a Biopharmaceutics Classification System (BCS) Class II model drug. Carvedilol is a lipid soluble compound, poorly absorbed in the gastrointestinal tract. The produced formulations were characterized in terms of morphology, crystallinity, in vitro dissolution test, in vitro Caco-2 cells permeability and in vivo pharmacokinetics in rats. Spherical microparticles with a carvedilol loading of 80% were produced with sizes around 4 μm. DLS and TEM suggested that carvedilol is released in the form of nanoparticles of controlled size when the microparticles are put in solution, and WAXS and DSC confirmed that carvedilol was in an amorphous state. In vitro dissolution tests showed that the produced microparticles dissolved 4-fold faster than the commercial carvedilol in the first 30 min. The apparent permeability in Caco-2 cells of the produced formulations was approximately 2.5-fold higher than the apparent permeability of the commercial carvedilol. The preliminary pharmacokinetic assay suggested a reduction in 2 h of the Cmax for the prepared formulations, but due to the high variability observed, the results need to be confirmed in further studies. This work showed the potential of nanostructured microparticles of an API via EAPG to increase dissolution rate and hence the bioavailability of a BCS Class II drug.This research was funded by the Spanish Ministry of Science and Universities (project RTI-2018-097249-B-C21), the Valencian Innovation Agency BIOENCAP project (reference number INNCAD00-18-31), the H2020 EU projects FODIAC (reference number 778388) CAPSULTEK (reference number 873827) and the CYTED thematic network (code 319RT0576).Peer reviewe

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Electrospun Nanofibers Containing Natural Deep Eutectic Solvents Exhibiting a 3D Rugose Morphology and Charge Retention Properties

In the present study, electrospun nanofibers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a biodegradable polyester, containing natural deep eutectic solvents (NADES) were obtained and reported for the first time, exhibiting an unreported 3D morphology and enhanced charge retention properties. Choline chloride (ChCl)/urea/water in a molar ratio of 1:2:1 was used as the NADES model system. Electrospun nanofibers were produced from a 10 wt % solution of PHBV containing 26 wt % NADES with respect to the polymer and were deposited on different substrates, that is, aluminum foil and non-woven spunbond polypropylene (PP). The morphology and charge retention ability were characterized under different conditions and on different substrates. The attained fiber morphology for the NADES-containing mats showed an average fiber diameter of around 300 nm, whereas the pure PHBV polymer under the same conditions produced electrospun fibers of around 880 nm. However, the deposition of PHBV/ChCl/urea/water fibers resulted in a surprising macroscopic rugose 3D surface morphology made of aligned nanofibers when processed at 50% relative humidity (RH). The nanofiber grammages above which this 3D morphology, associated with NADES-induced charge retention, formed was found to be dependent on the substrate used and RH. This morphology was not seen at 20% RH nor when pure PHBV was produced. Charge stability studies revealed that PHBV/ChCl/urea/water nanofibers exhibited lasting charge retention, especially when sandwiched between spunbond polypropylene textiles. Finally, such multilayer structures containing a very thin double layer of PHBV/ChCl/urea/water fibers after corona treatment exhibited improved paraffin aerosol penetration, which was ascribed to the combination of thinner fibers and their charge retention capacity. The here-developed electrospun PHBV fibers containing NADES demonstrated for the first time a new potential application as electret filter media.This research was funded by the Spanish Ministry of Science and Universities (project RTI-2018-097249-B-C21) and the PTI + Global Health of CSIC.Peer reviewe

Dragon’s blood sap: storage stability and antioxidant activity

Currently, consumers are demanding additive-free, fresher, and more-natural products. Dragon’s Blood Sap (DBS), the deep red latex of the specie of tree Croton lechleri (Müll. Arg.), contains a high concentration of phenolic compounds of great interest for the food, pharmaceutical, and cosmetic industries. These chemical compounds are highly susceptible to degradation. Therefore, DBS storage stability and its photo-oxidation was studied by Fourier transform infrared spectroscopy (FT-IR) and UV-Vis spectrophotometry for 39 days at different temperatures (4–21 °C) and relative humidities (0–56%), as well as under UV light exposure. It was observed that the degradation of phenolic compounds was reduced at 0% relative humidity (RH), not showing a significant effect of temperature in the range studied. UV light irradiation degraded DBS in a 20%. DBS has an exceptional high and stable antioxidant content (≥93% inhibition percentage of DPPH), which makes it a unique property to consider the DBS as an antioxidant agent or ingredient for consumer products formulations.This research was funded by MINECO grant numbers [AGL2015-63855-C2-1-R and DI-14-6906].Peer reviewe

Superhydrophobic Bio-Coating Made by Co-Continuous Electrospinning and Electrospraying on Polyethylene Terephthalate Films Proposed as Easy Emptying Transparent Food Packaging

Interest in coated films with micro/nanofeatures has grown rapidly in recent years due to their enhanced functional performance and better durability under demanding contact conditions or aggressive environments. In the current work, it is reported a one-step co-continuous bilayer coating process to generate a multilayer film that rendered superhydrophobicity to a polyethylene terephthalate (PET) substrate. A continuous coating based on ultrathin polylactide (PLA) fibers was deposited onto PET films by means of electrospinning, which increased the water contact angle of the substrate. Sequentially, nanostructured silica (SiO2) microparticles were electrosprayed onto the coated PET/PLA films to achieve superhydrophobic behavior. This multilayer was then treated at different annealing temperatures, that is, 150 ◦C, 160 ◦C, and 170 ◦C, in order to create interlayers’ adhesion to each other and to the substrate. It was found that co-continuous deposition of PLA fibers and nanostructured SiO2 microparticles onto PET films constituted a useful strategy to increase the surface hydrophobicity of the PET substrate, achieving an optimal apparent water contact angle of 170◦ and a sliding angle of 6◦. Unfortunately, a reduction in background transparency was observed compared to the uncoated PET film, especially after electrospraying of the SiO2 microparticles but the films were seen to have a good contact transparency. The materials developed show significant potential in easy emptying transparent food packaging applications.This study was funded by the EU H2020 OPTINANOPRO project (No. 686116). Acknowledgments: S.T.-G. would like to thank the Ministry of Science, Innovation, and Universities (MICIU) for his Juan de la Cierva contract (IJCI-2016-29675).Peer reviewe

Development and Characterization of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Biopapers Containing Cerium Oxide Nanoparticles for Active Food Packaging Applications

Food quality is mainly affected by oxygen through oxidative reactions and the proliferation of microorganisms, generating changes in its taste, odor, and color. The work presented here describes the generation and further characterization of films with active oxygen scavenging properties made of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) loaded with cerium oxide nanoparticles (CeO2NPs) obtained by electrospinning coupled to a subsequent annealing process, which could be used as coating or interlayer in a multilayer concept for food packaging applications. The aim of this work is to explore the capacities of these novel biopolymeric composites in terms of O2 scavenging capacity, as well as antioxidant, antimicrobial, barrier, thermal, and mechanical properties. To obtain such biopapers, different ratios of CeO2NPs were incorporated into a PHBV solution with hexadecyltrimethylammonium bromide (CTAB) as a surfactant. The produced films were analyzed in terms of antioxidant, thermal, antioxidant, antimicrobial, optical, morphological and barrier properties, and oxygen scavenging activity. According to the results, the nanofiller showed some reduction of the thermal stability of the biopolyester but exhibited antimicrobial and antioxidant properties. In terms of passive barrier properties, the CeO2NPs decreased the permeability to water vapor but increased the limonene and oxygen permeability of the biopolymer matrix slightly. Nevertheless, the oxygen scavenging activity of the nanocomposites showed significant results and improved further by incorporating the surfactant CTAB. The PHBV nanocomposite biopapers developed in this study appear as very interesting constituents for the potential design of new active organic recyclable packaging materials.Authors thank the funding received from the EU H2020 BBI JU USABLE PACKAGING project—836884 and also from the Spanish Ministry of Science and Innovation, project PID2021-128749OB-C31.With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001189-S).Peer reviewe

Preliminary Studies on an Innovative Bioactive Skin Soluble Beauty Mask Made by Combining Electrospinning and Dry Powder Impregnation

The world of cosmetics is now aiming at biobased materials which are skin-compatible and can be used to generate more sustainable beauty masks with enhanced bioactivity. This work presents, in this line of interest, the combination of two innovative technologies, namely electrospinning and dry powder impregnation, to generate biobased skin soluble electrospun pullulan carriers dry impregnated with chitin nanofibrils-nanolignin-glycyrrethinic acid (CLA) complexes, as effective biobased and skin compatible beauty masks. The scalability of the pullulan electrospun carrier and bioactive complexes impregnation were optimized and the morphology evaluated. Subsequently, skin compatibility and mask effectiveness were investigated in vitro and in vivo. The results showed that cell viability was optimal for both impregnated and neat pullulan fibers. Additionally, the CLA impregnated pullulan fibers were able to upregulate the endogenous antimicrobial molecule HBD-2. Preliminary studies in vivo indicated that the beauty mask containing the CLA complexes significantly decreased area, length and depth of forehead and crow’s feet wrinkles, and significantly increased moisturizing levels in the skin. The developed beauty mask was also seen to increase skin firmness, while it did not show skin irritation after the test. The work demonstrates that the combination of these two technologies may open new alternatives to more sustainable bioactive cosmetic products for the skin.This research was funded by the Bio-Based Industries Joint Undertaking under the European Union Horizon 2020 research program (BBI-H2020), PolyBioSkin project, grant number G.A. 745839.Peer reviewe

Electrospun Multilayered Films Based on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), Copolyamide 1010/1014, and Electrosprayed Nanostructured Silica

In this research, bio-based electrospun multilayered films for food packaging applications with good barrier properties and close to superhydrophobic behavior were developed. For this purpose, two different biopolymers, a low-melting point and fully bio-based synthetic aliphatic copolyamide 1010/1014 (PA1010/1014) and the microbially synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and food-contact-complying organomodified silica (SiO2) nanostructured microparticles, were processed by electrospinning. The production of the multilayer structure was finally obtained by means of a thermal post-treatment, with the aim to laminate all of the components by virtue of the so-called interfiber coalescence process. The so developed fully electrospun films were characterized according to their morphology, their permeance to water vapor and oxygen, the mechanical properties, and their water contact angle properties. Interestingly, the annealed electrospun copolyamide did not show the expected improved barrier behavior as a monolayer. However, when it was built into a multilayer form, the whole assembly exhibited a good barrier, an improved mechanical performance compared to pure PHBV, an apparent water contact angle of ca. 146°, and a sliding angle of 8°. Consequently, these new biopolymer-based multilayer films could be a bio-based alternative to be potentially considered in more environmentally friendly food packaging strategies.This research was funded by the H2020 EU project USABLE PACKAGING (reference number 836884) and by the Spanish Ministry of Science and Universities (projects RTI-2018-097249-B-C1 and PID2021-128749OB-C31).Peer reviewe