Neutrinos that violate CPT, and the experiments that love them

Recently we proposed a framework for explaining the observed evidence for neutrino oscillations without enlarging the neutrino sector, by introducing CPT violating Dirac masses for the neutrinos. In this paper we continue the exploration of the phenomenology of CPT violation in the neutrino sector. We show that our CPT violating model fits the existing SuperKamiokande data at least as well as the standard atmospheric neutrino oscillation models. We discuss the challenge of measuring CP violation in a neutrino sector that also violates CPT. We point out that the proposed off-axis extension of MINOS looks especially promising in this regard. Finally, we describe a method to compute CPT violating neutrino effects by mocking them up with analog matter effects.Comment: 17 pages, 3 eps figure

Oxygen therapy in headache disorders: A systematic review

Background: The global active prevalence of migraines is approximately 14.7%. Oxygen therapy may reduce the use of non-steroidal anti-inflammatory drugs (NSAIDs) which often have various negative side effects. The purpose of this systematic review is to analyze the literature on the efficacy of high flow oxygen for the management of headache disorders, compared to placebo treatment. Methods: Studies were identified by PubMed, Web of Science and Scopus database from 1980 to the 30 October 2020. The search included the following terms: “oxygen therapy” and “headache” and “migraine”. Studies were included if high flow oxygen was used in the treatment of headache disorders. All selected studies were qualitatively analyzed. Results: Our literature search identified 71 studies, of which 65 were discarded and 6 were included in the meta-analysis. The random effect model did not show a pooled significant resolution of headache disorders (OR 2.08 (95% CI 0.92–4.70), p < 0.0001) in the oxygen therapy group compared to the placebo group. Conclusion: In our systematic review of six studies, there were no significant differences between high flow oxygen and placebo treatment groups

SketchGen: Generating Constrained CAD Sketches

Computer-aided design (CAD) is the most widely used modeling approach for technical design. The typical starting point in these designs is 2D sketches which can later be extruded and combined to obtain complex three-dimensional assemblies. Such sketches are typically composed of parametric primitives, such as points, lines, and circular arcs, augmented with geometric constraints linking the primitives, such as coincidence, parallelism, or orthogonality. Sketches can be represented as graphs, with the primitives as nodes and the constraints as edges. Training a model to automatically generate CAD sketches can enable several novel workflows, but is challenging due to the complexity of the graphs and the heterogeneity of the primitives and constraints. In particular, each type of primitive and constraint may require a record of different size and parameter types. We propose SketchGen as a generative model based on a transformer architecture to address the heterogeneity problem by carefully designing a sequential language for the primitives and constraints that allows distinguishing between different primitive or constraint types and their parameters, while encouraging our model to re-use information across related parameters, encoding shared structure. A particular highlight of our work is the ability to produce primitives linked via constraints that enables the final output to be further regularized via a constraint solver. We evaluate our model by demonstrating constraint prediction for given sets of primitives and full sketch generation from scratch, showing that our approach significantly out performs the state-of-the-art in CAD sketch generation

A modelling and experimental study on the co-precipitation of Ni0.8Mn0.1Co0.1(OH)2 as precursor for battery cathodes

A multi-inlet vortex mixer is used to investigate the co-precipitation of Ni0.8Mn0.1Co0.1(OH)2 particles, largely employed to produce Li-ion battery cathodes. The co-precipitation process is simulated with a population balance model, adopted to describe the experimental findings and gain deeper understanding of the process. Experiments and simulations are carried out under different operating conditions to quantify the effect of mixing conditions, turbulence and feed reactant concentrations on the final characteristics of the obtained particles, such as the size distribution, structure, morphology and density. These characteristics are measured by conducting static light-scattering, FESEM and XRD analyses and are expected to have, in turn, a tremendous effect on the final electrochemical performance of the cathode. Based on the experimental and modelling observations, we discuss the role of nucleation, molecular growth and aggregation in the co–precipitation process. Eventually a possible mechanism explaining the formation of Ni0.8Mn0.1Co0.1(OH)2 particles is proposed

Open sea OWC motions and mooring loads monitoring at BiMEP

This is the author accepted manuscript.Despite the large number of wave energy converter concepts proposed over the past three decades, only a few field measurement datasets are available in the public domain. The sparse nature of device performance and reliability data coupled with a general lack of design convergence means that technological and economic progress within the sector is fragmented. Fundamental to ensuring device efficiency and survivability is the acquisition of long-term, open sea, device and mooring system response data, combined with comprehensive numerical modelling. With mooring systems representing approximately 10% of marine renewable energy device CAPEX, the evolution of shared mooring systems and the use of novel materials with load reduction capabilities represent clear strategies to achieve more favourable project finances. This paper will report on design of the mooring load monitoring system as well as preliminary analysis of several load cases identified from field data recorded during the winter of the first deployment. Comparisons are made to numerical simulations of the device and mooring system subjected to representative environmental conditions. The measured mooring line tensions also provide operational design criteria (i.e. load capacity and durability requirements) for two elastomeric tethers which will replace the polyester ropes currently used in the seaward catenary lines.The research leading to this paper is part of the OPERA (Open Sea Operating Experience to Reduce Wave Energy Cost) project which is funded from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 654.444

Designing a double-coated cathode with high entropy oxides by microwave-assisted hydrothermal synthesis for highly stable Li–S batteries

Nowadays, Li-S batteries are considered as one of the most promising alternatives to Li-ion technology in the near future, thanks to their high specific capacity and their significantly lower environmental impact and production costs. Consequently, many efforts have been directed to tackle with the inherent issues that affect Li-S batteries. One of the main problems is the so-called shuttle effect, which basically entails the unwanted migration of lithium polysulfides (LiPSs) from the cathode to the anode side, causing the degradation of the cell. Here, we report an effective strategy to restrain the shuttle effect and increase the kinetics at the cathode of the lithium-sulfur (Li-S) battery. A functional layer including high entropy oxides (HEO) coated onto the sulfur cathode allows to exploit the HEOs capability as promoter catalysts for the conversion of LiPSs. Pure HEO powders are synthesized by fast, highly efficient microwave irradiation, followed by heat treatment at 930 degrees C. The formation of highly crystalline HEO is confirmed by X-ray diffraction analysis. The LiPSs adsorption capability of HEO is evaluated by UV-vis and X-ray photoelectron spectroscopy analyses. The effect of the HEO-coated sulfur cathode on the electrochemical performance of the Li-S battery is studied by cyclic voltammetry and galvanostatic charge/discharge. The cell with double-coated cathode delivers an initial discharge capacity of 1173 mAh/g at C/10 with 45% capacity retention over 500 cycles at C/5, approaching similar to 99% coulombic efficiency.[GRAPHICS]

Testing the Higgs Mechanism in the Lepton Sector with multi-TeV e+e- Collisions

Multi-TeV e+e- collisions provide with a large enough sample of Higgs bosons to enable measurements of its suppressed decays. Results of a detailed study of the determination of the muon Yukawa coupling at 3 TeV, based on full detector simulation and event reconstruction, are presented. The muon Yukawa coupling can be determined with a relative accuracy of 0.04 to 0.08 for Higgs bosons masses from 120 GeV to 150 GeV, with an integrated luminosity of 5 inverse-ab. The result is not affected by overlapping two-photon background.Comment: 6 pages, 2 figures, submitted to J Phys G.: Nucl. Phy

SILAC-based proteomic quantification of chemoattractant-induced cytoskeleton dynamics on a second to minute timescale

Cytoskeletal dynamics during cell behaviours ranging from endocytosis and exocytosis to cell division and movement is controlled by a complex network of signalling pathways, the full details of which are as yet unresolved. Here we show that SILAC-based proteomic methods can be used to characterize the rapid chemoattractant-induced dynamic changes in the actin–myosin cytoskeleton and regulatory elements on a proteome-wide scale with a second to minute timescale resolution. This approach provides novel insights in the ensemble kinetics of key cytoskeletal constituents and association of known and novel identified binding proteins. We validate the proteomic data by detailed microscopy-based analysis of in vivo translocation dynamics for key signalling factors. This rapid large-scale proteomic approach may be applied to other situations where highly dynamic changes in complex cellular compartments are expected to play a key role