Disinclusion of unerupted teeth by mean of self-ligating brackets: effect of blood contamination on shear bond strength

Objectives: The aim of this study was to assess the effect of blood contamination on the shear bond strength and failure site of three different orthodontic self-ligating brackets. Study Design: 240 bovine permanent mandibular incisors were randomly divided into 12 groups of 20 specimens each. Orthodontic self-ligating brackets were tested under four different enamel surface conditions: a) dry, b) blood contamination before priming, c) blood contamination after priming, d) blood contamination before and after priming. Brackets were bonded to the teeth and subsequently tested using a Instron universal testing machine. Shear bond strength values and adhesive failure rate were recorded. Statistical analysis was performed using ANOVA and Tukey tests (strength values), and Chi squared test (ARI Scores). Results: Non-contaminated enamel surfaces showed highest bond strengths for all self ligating brackets. Under blood-contamination shear bond strengths lowered for all brackets tested. Groups contaminated before and after primer application showed the lowest shear bond strength. Significant differences in debond locations were found among the groups under the various enamel surface conditions. Conclusions: Blood contamination of enamel during the bonding procedure lowers bond strength values of self ligating brackets, expecially when contamination occur in different times of the bonding procedure

Opening and closure forces of sliding mechanisms of different self-ligating brackets

Self-ligating brackets engage the wire by means of a slide mechanism. Forces that have to be applied to open and close the sliding mechanism of brackets are still unknown. Objective The aim of this study was to measure and compare the opening and closure forces of different self-ligating brackets. Material and Methods Three different stainless steel self-ligating brackets (Carriere LX, Ortho Organizers; F1000, Leone; Damon Q, Ormco) were tested. For each different bracket, 20 maxillary right central incisors and 20 mandibular right central incisors were used. Opening and closure forces were measured using an Instron Universal Testing Machine. Statistical analysis was performed and ANOVA and Tukey tests were carried out. Results Opening forces were registered between 1.1 N and 5.6 N, whereas closure forces were recorded between 1.57 N and 4.87 N. Significant differences were detected among the different brackets and between the two prescriptions tested. Conclusion The knowledge of different opening and closure forces of self-ligating brackets can help the orthodontist in the clinical management of these devices

Androgen receptor polymorphisms and testicular cancer risk

Testicular cancer (TC) is currently the most common malignant solid tumour in Caucasian males aged 15-39 years. Epidemiological evidence suggests that its onset may be due to an imbalance in the action of steroidal sex hormones and their receptors. A faulty androgen receptor signalling pathway can, in fact, cause various male reproductive disorders. The androgen receptor (AR) gene has two polymorphic segments consisting of CAG and GGC repeats. The length of CAG repeats has been shown to affect the regulation of AR activity. In our study, we used fragment analysis to evaluate the AR gene repeats of 302 TC patients and 322 controls, to establish if there is any association between repeat number and TC. This study of the largest Italian caseload investigated to date highlighted three particularly significant aspects. First, a CAG repeat number of ≥25 may be considered a risk factor for the onset of TC, given its greater frequency in patients in comparison with controls. This difference became significant for the non-seminoma group. Second, men with CAG repeats below 21 or above 24 were found to have a, respectively, 50 and 76% higher risk of TC than those with CAG 21-24, suggesting that these too can be considered a risk factor for TC. Finally, stage II patients were more likely to have a CAG repeat number 24 than stage I patients. © 2014 American Society of Andrology and European Academy of Andrology

Clinical evaluation of bond failures and survival between mandibular canine-to-canine retainers made of flexible spiral wire and fiber-reinforced composite

Objectives: The purpose of this longitudinal prospective randomized study was to evaluate the clinical reliability of two different types of postorthodontic treatment retainers: a silanised-treated glass fibers-reinforced resin composite (FRC) and a directly bonded multistranded stainless steel wire. The hypothesis of the study was to assess if significant differences are present between failure rates of the two retainers. Study Design: This prospective study was based on an assessment of 87 patients (35 men and 52 women),with an average age of 24 years who required a lower arch fixed retainer after orthodontic treatment. Patients were divided in two groups. Assignment was carried out with random tables. A follow-up examination was carried out once a month. The number, cause, and date of single bond adhesive failures were recorded for both retainers over 12 months. Teeth that were rebonded after failure were not included in the success analysis. Statistical analysis was performed by means of a Fisher's exact test, Kaplan-Meier survival estimates, and log rank test. Results: Bond failure rate was significantly higher (P=0.0392) for multistranded metallic wire than for FRC. Conclusions: Glass fiber-reinforced resin composite retainers and multistranded metallic wires showed no significant difference in single bond failure rates over a one-year follow up

Effect of water contamination on the shear bond strength of self-ligating brackets

AbstractPurposeThe aim of the present study is to evaluate the effect of water contamination on the shear bond strength (SBS) and adhesive remnant index (ARI) score of self-ligating brackets.Materials and methodsOne conventional bracket and three different self-ligating brackets were bonded onto 160 bovine permanent mandibular incisors, divided randomly into 8 groups. For each type of bracket, 20 samples were bonded on dry enamel and 20 after water contamination. After 24h, all specimens were tested for SBS using an Instron Universal Testing Machine, and ARI scores were evaluated.ResultsAll groups showed clinically adequate SBSs. Quick brackets bonded onto dry enamel showed significantly higher SBSs than all other groups tested, whereas the lowest shear strength values were recorded for Step, Quick, and Damon 3MX brackets bonded onto contaminated enamel and for Damon 3MX onto dry enamel. Frequency distribution of ARI Scores showed a prevalence of ARI “2” and “3” for all the groups tested.ConclusionsWater contamination reduces the SBS of self-ligating brackets, but significant differences have been found only for Quick brackets. All groups showed a significant higher frequency of ARI Score of “2” and “3”

Monitoring PD-L1 positive circulating tumor cells in non-small cell lung cancer patients treated with the PD-1 inhibitor Nivolumab

Controversial results on the predictive value of programmed death ligand 1 (PD-L1) status in lung tumor tissue for response to immune checkpoint inhibitors do not allow for any conclusive consideration. Liquid biopsy might allow real-time sampling of patients for PD-L1 through the course of the disease. Twenty-four stage IV NSCLC patients included in the Expanded Access Program with Nivolumab were enrolled. Circulating tumor cells (CTCs) were analyzed by CellSearch with anti-human B7-H1/PD-L1 PE-conjugated antibody. PD-L1 expressing CTCs were assessed at baseline, at 3 and 6 months after starting therapy, and correlated with outcome. At baseline and at 3 months of treatment, the presence of CTCs and the expression of PD-L1 on their surface were found associated to poor patients outcome. Nevertheless, the high frequency of PD-L1 expressing CTCs hampered to discriminate the role of PD-L1 in defining prognosis. Conversely although CTCs were found in all patients 6 months after treatment, at this time patients could be dichotomized into two groups based PD-L1 expression on CTCs. Patients with PD-L1 negative CTCs all obtained a clinical benefit, while patients with PD-L1 (+) CTCs all experienced progressive disease. This suggests that the persistence of PD-L1(+) CTCs might mirror a mechanism of therapy escape

Med Oral Patol Oral Cir Bucal

Abstract Objectives: The aim of this study was to assess the effect of blood contamination on the shear bond strength and failure site of three different orthodontic self-ligating brackets. Study Design: 240 bovine permanent mandibular incisors were randomly divided into 12 groups of 20 specimens each. Orthodontic self-ligating brackets were tested under four different enamel surface conditions: a) dry, b) blood contamination before priming, c) blood contamination after priming, d) blood contamination before and after priming. Brackets were bonded to the teeth and subsequently tested using a Instron universal testing machine. Shear bond strength values and adhesive failure rate were recorded. Statistical analysis was performed using ANOVA and Tukey tests (strength values), and Chi squared test (ARI Scores). Results: Non-contaminated enamel surfaces showed highest bond strengths for all self ligating brackets. Under blood-contamination shear bond strengths lowered for all brackets tested. Groups contaminated before and after primer application showed the lowest shear bond strength. Significant differences in debond locations were found among the groups under the various enamel surface conditions. Conclusions: Blood contamination of enamel during the bonding procedure lowers bond strength values of self ligating brackets, expecially when contamination occur in different times of the bonding procedure. Disinclusion, self ligating brackets, blood, contamination, enamel, orthodontics, oral surgery. Scribante A, Sfondrini MF, Gatti S, Gandini P. Disinclusion of unerupted teeth by mean of self-ligating brackets: Effect of blood contamination on shear bond strength. Key Words

Spot-Bonding and Full-Bonding Techniques for Fiber Reinforced Composite (FRC) and Metallic Retainers

Fiber reinforced Composite (FRC) retainers have been introduced as an aesthetic alternative to conventional metallic splints, but present high rigidity. The purpose of the present investigation was to evaluate bending and fracture loads of FRC splints bonded with conventional full-coverage of the FRC with a composite compared with an experimental bonding technique with a partial (spot-) resin composite cover. Stainless steel rectangular flat, stainless steel round, and FRC retainers were tested at 0.2 and 0.3 mm deflections and at a maximum load. Both at 0.2 and 0.3 mm deflections, the lowest load required to bend the retainer was recorded for spot-bonded stainless steel flat and round wires and for spot-bonded FRCs, and no significant differences were identified among them. Higher force levels were reported for full-bonded metallic flat and round splints and the highest loads were recorded for full-bonded FRCs. At the maximum load, no significant differences were reported among spot- and full-bonded metallic splints and spot-bonded FRCs. The highest loads were reported for full bonded FRCs. The significant decrease in the rigidity of spot-bonded FRC splints if compared with full-bonded retainers suggests further tests in order to propose this technique for clinical use, as they allow physiologic tooth movement, thus presumably reducing the risk of ankylosis

Bending properties of fiber-reinforced composites retainers bonded with spot-composite coverage

Orthodontic and periodontal splints are prepared with round or flat metallic wires. As these devices cannot be used in patients with allergy to metals or with aesthetic demands, fiber-reinforced composite (FRC) retainers have been introduced. Stiffness of FRC materials could reduce physiologic tooth movement. In order to lower rigidity of conventional FRC retainers, a modified construction technique that provided a partial (spot) composite coverage of the fiber has been tested and compared with metallic splints and full-bonded FRCs. Flat (Bond-a-Braid, Reliance Orthodontic Products) and round (Penta-one 0155, Masel Orthodontics) stainless steel splints, conventional FRC splints, and experimental spot-bonded FRC retainers (Everstick Ortho, StickTech) were investigated. The strength to bend the retainers at 0.1mm deflection and at maximum load was measured with a modified Frasaco model. No significant differences were reported among load values of stainless steel wires and experimental spot-bonded FRC retainers at 0.1mm deflection. Higher strength values were recoded for conventional full-bonded FRCs. At maximum load no significant differences were reported between metallic splints (flat and round) and experimental spot-bonded FRCs, and no significant differences were reported between spot-and full-bonded FRC splints. These results encourage further tests in order to evaluate clinical applications of experimental spot-bonded FRC retainers

Role of serial ultrasound screening of venous thrombosis in oncologic children with central lines

Objective: Pediatric oncology patients are more likely to develop venous thromboembolic events related to central venous catheter (CVC). Study aim was to determine the incidence of catheter related thrombosis (CRT) in a cohort of pediatric oncology patients using vascular ultrasound (US). Methods: Consecutive children of a single cancer referral center, requiring medium to long term CVC implantation, were screened for CRT, using serial ultrasound exams. Measurements and main results: US examinations were taken 15, 30 and 90 days after CVC implantation. A total of 113 catheters were studied in 103 patients (median age 10.5 years old). Ultrasound screening was completed in 80.5% patients. Apart from three subjects, US investigations were well tolerated. Patients were followed for a median of 87 days. No symptomatic CRT was recorded throughout. Three cases of asymptomatic thrombosis were identified with early US screening; incidence of CRT events for 1000 catheter-days was 0.11. The presence of previous catheter-related infection and an history of one or more previous CVC placement were identified as risk factors. Conclusions: In our pediatric patients the incidence of CRT is low. Ultrasound monitoring is well tolerated and allows detecting asymptomatic CRT. Patients with previous CVC infection or insertion seem to have a higher risk of CRT (p =0.003 and p = 0.043 respectively). Keywords: Central venous catheters, Venous thrombosis, Vascular ultrasound, Vascular catheter infections, Childre