Letter from W. Paddock

Letter of recommendation for E. D. Ball

Structural Design and Analysis of the Upper Pressure Shell Section of a Composite Crew Module

This paper presents the results of the structural design and analysis of the upper pressure shell section of a carbon composite demonstration structure for the Composite Crew Module (CCM) Project. The project is managed by the NASA Engineering and Safety Center with participants from eight NASA Centers, the Air Force Research Laboratory, and multiple aerospace contractors including ATK/Swales, Northrop Grumman, Lockheed Martin, Collier Research Corporation, Genesis Engineering, and Janicki Industries. The paper discusses details of the upper pressure shell section design of the CCM and presents the structural analysis results using the HyperSizer structural sizing software and the MSC Nastran finite element analysis software. The HyperSizer results showed that the controlling load case driving most of the sizing in the upper pressure shell section was the internal pressure load case. The regions around the cutouts were controlled by internal pressure and the main parachute load cases. The global finite element analysis results showed that the majority of the elements of the CCM had a positive margin of safety with the exception of a few hot spots around the cutouts. These hot spots are currently being investigated with a more detailed analysis. Local finite element models of the Low Impact Docking System (LIDS) interface ring and the forward bay gussets with greater mesh fidelity were created for local sizing and analysis. The sizing of the LIDS interface ring was driven by the drogue parachute loads, Trans-Lunar Insertion (TLI) loads, and internal pressure. The drogue parachute loads controlled the sizing of the gusset cap on the drogue gusset and TLI loads controlled the sizing of the other five gusset caps. The main parachute loads controlled the sizing of the lower ends of the gusset caps on the main parachute fittings. The results showed that the gusset web/pressure shell and gusset web/gusset cap interfaces bonded using Pi-preform joints had local hot spots in the Pi-preform termination regions. These regions require a detailed three-dimensional analysis, which is currently being performed, to accurately address the load distribution near the Pi-preform termination in the upper and lower gusset caps

Rickettsia parkeri in Argentina

Clinical reports of an eschar-associated rickettsiosis in the Paraná River Delta of Argentina prompted an evaluation of Amblyomma triste ticks in this region. When evaluated by PCR, 17 (7.6%) of 223 questing adult A. triste ticks, collected from 2 sites in the lower Paraná River Delta, contained DNA of Rickettsia parkeri

Investigations into ecological and sociological determinants of land-use decisions: a study of inland lake watersheds in northern Michigan

reprinted June l978; Bibliography: p. 251-259.http://deepblue.lib.umich.edu/bitstream/2027.42/49266/2/2194424.0001.001.pd

Methods for Extremely Sparse-Angle Proton Tomography

Proton radiography is a widely-fielded diagnostic used to measure magnetic structures in plasma. The deflection of protons with multi-MeV kinetic energy by the magnetic fields is used to infer their path-integrated field strength. Here, the use of tomographic methods is proposed for the first time to lift the degeneracy inherent in these path-integrated measurements, allowing full reconstruction of spatially resolved magnetic field structures in three dimensions. Two techniques are proposed which improve the performance of tomographic reconstruction algorithms in cases with severely limited numbers of available probe beams, as is the case in laser-plasma interaction experiments where the probes are created by short, high-power laser pulse irradiation of secondary foil targets. The methods are equally applicable to optical probes such as shadowgraphy and interferometry [M. Kasim et al. Phys. Rev. E 95, 023306 (2017)], thereby providing a disruptive new approach to three dimensional imaging across the physical sciences and engineering disciplines.Comment: 11 pages, 6 figures, companion article to arXiv:2103.1126

Outcome of Diagnostic Tests Using Samples from Patients with Culture-Proven Human Monocytic Ehrlichiosis: Implications for Surveillance

We describe the concordance among results from various laboratory tests using samples derived from nine culture-proven cases of human monocytic ehrlichiosis (HME) caused by Ehrlichia chaffeensis. A class-specific indirect immunofluorescence assay for immunoglobulin M (IgM) and IgG, using E. chaffeensis antigen, identified 44 and 33% of the isolation-confirmed HME patients on the basis of samples obtained at initial clinical presentation, respectively; detection of morulae in blood smears was similarly insensitive (22% positive). PCR amplifications of ehrlichial DNA targeting the 16S rRNA gene, the variable-length PCR target gene, and the groESL operon were positive for whole blood specimens obtained from all patients at initial presentation. As most case definitions of HME require a serologic response with compatible illness for a categorization of even probable disease, PCR would have been required to confirm the diagnosis of HME in all nine of these patients without the submission of a convalescent-phase serum sample. These data suggest that many, if not most, cases of HME in patients who present early in the course of the disease may be missed and underscore the limitations of serologically based surveillance systems

Analysis of Risk Factors for Fatal Rocky Mountain Spotted Fever: Evidence for Superiority of Tetracyclines for Therapy

Epidemiologic and clinical characteristics of fatal and nonfatal cases of Rocky Mountain spotted fever (RMSF) were compared to identify risk factors for death caused by this disease. Confirmed and probable RMSF cases reported through US national surveillance for 1981- 1998 were analyzed. Among 6388 RMSF patients, 213 died (annual case-fatality rate, 3M; range, 4.9 % in 1982 to 1.1 % in 1996). Use of tetracycline-class antibiotics for treatment of RMSF increased significantly in the 1990s, compared with use in the 1980s. Older patients, patients treated with chloramphenicol only, patients for whom tetracycline antibiotics were not the primary therapy, and patients for whom treatment was delayed ≥5 days after the onset of symptoms were at higher risk for death. Although the case-fatality rate was lower in the 1990s than in the 1980s, risk factors for fatal RMSF were similar. Despite the availability of effective antibiotics, RMSF-related deaths continue to occur because of delayed diagnosis and failure to use appropriate therapy

Analysis of Risk Factors for Fatal Rocky Mountain Spotted Fever: Evidence for Superiority of Tetracyclines for Therapy

Epidemiologic and clinical characteristics of fatal and nonfatal cases of Rocky Mountain spotted fever (RMSF) were compared to identify risk factors for death caused by this disease. Confirmed and probable RMSF cases reported through US national surveillance for 1981- 1998 were analyzed. Among 6388 RMSF patients, 213 died (annual case-fatality rate, 3M; range, 4.9 % in 1982 to 1.1 % in 1996). Use of tetracycline-class antibiotics for treatment of RMSF increased significantly in the 1990s, compared with use in the 1980s. Older patients, patients treated with chloramphenicol only, patients for whom tetracycline antibiotics were not the primary therapy, and patients for whom treatment was delayed ≥5 days after the onset of symptoms were at higher risk for death. Although the case-fatality rate was lower in the 1990s than in the 1980s, risk factors for fatal RMSF were similar. Despite the availability of effective antibiotics, RMSF-related deaths continue to occur because of delayed diagnosis and failure to use appropriate therapy