285 research outputs found

    Symptom increase following a functional capacity evaluation in patients with chronic low back pain:An explorative study of safety

    Get PDF
    Introduction: This study was performed to study intensity and duration of symptom increase following an FCE and to explore safety of an FCE. Methods: Included were 92 patients with chronic low back pain (CLBP), mean age 38.5 years, mean self-reported disability 12.5 (Roland Morris Disability Questionnaire). All patients underwent an FCE. Symptom increase was measured with a 2-item questionnaire. Operational definition for safety: no formal complaint filed and symptom increase to occur only temporarily. Results: No formal complaints were filed (n=92). In total, 54 patients returned the questionnaire (59%; 'responders'). Of the responders, 76% reported increased symptom intensity after an FCE, ranging from 'little increase' to 'severe increase'. Symptoms of all responders returned to pre-FCE level. Duration of symptom increase of the responders ranged from 1 day to 3 weeks. Symptom increase resided to pre-FCE level within 1 week in 93% of the responders. Symptom increase was weakly related to self-reported disability (r=0.38, p <0.05). Except for gender, differences between responders and non-responders were non-significant. Conclusion: A temporary increase in symptom intensity following an FCE is common. Within the operational definitions of safety used in this study, assessment of functional capacity of patients with CLBP appears safe

    Effect of Functional Capacity Evaluation information on the judgment of physicians about physical work ability in the context of disability claims

    Get PDF
    Purpose To test whether Functional Capacity Evaluation (FCE) information lead insurance physicians (IPs) to change their judgment about the physical work ability of claimants with musculoskeletal disorders (MSDs). Methods Twenty-seven IPs scored twice the physical work ability of two claimants for 12 specified activities, using a visual analogue scale. One claimant performed an FCE, the other served as a control. Outcome measure was the difference between experimental and control group in number of shifts in the physical work ability for the total of 12 specified activities. Results The IPs changed their judgment about the work ability 141 times when using FCE information compared to 102 times when not using this information (P-value = 0.001), both in the direction of more and less ability. Conclusions The IPs change their judgment of the physical work ability of claimants with MSDs in the context of disability claim procedures more often when FCE information is provide

    Are Pain Intensity and Pain Related Fear Related to Functional Capacity Evaluation Performances of Patients with Chronic Low Back Pain?

    Get PDF
    Introduction: Pain related fear and pain intensity have been identified as factors negatively influencing Functional Capacity Evaluation (FCE) performances in patients with CLBP. Conflicting results have been reported in the literature. The objective of this study was to analyze the relationships between pain intensity and pain-related fear on the one hand, and performances during an FCE on the other hand in two samples of patients with chronic low back pain (CLBP). Methods: Two cross sectional observation studies were performed with two samples of patients with CLBP (study 1: n = 79; study 2: n = 58). Pain related fears were operationally defined as the score on the Tampa Scale of Kinesiophobia in study 1, and the Fear Avoidance Beliefs Questionnaire (FABQ) in study 2. Pain intensity was measured with a Numeric Rating Scale in both studies. Avoidance behavior observed during FCE was in both studies operationally defined as the unwillingness to engage in high intensity performance levels of three different functional activities: high intensity lifting, prolonged standing in a forward bend position, and fast repetitive bending at the waist. Results: A total of 25 correlations between pain and pain related fear, and performance variables were calculated, out of which 7 were significant (p < 0.05). The strength of these significant correlations ranged from r = −0.23 to r = −0.50. Multivariate linear regression analyses revealed non-significant relationships in most instances. Pain and pain related fear contributed little if any to these models. Conclusions: The relation between pain and pain related fear and FCE performance is weak or non-existent in patients with CLBP

    What Facilitates Return to Work? Patients Experiences 3 Years After Occupational Rehabilitation

    Get PDF
    Objective We have limited knowledge about the specific elements in an occupational rehabilitation programme that facilitate the process leading to return to work (RTW) as perceived by the patients. The aim of the study was to explore individual experiences regarding contributing factors to a successful RTW, 3 years after a resident occupational rehabilitation programme. Methods The study is based on interviews of 20 individuals who attended an occupational rehabilitation programme 3 years earlier. Ten informants had returned to work (RTW) and ten were receiving disability pension (DP). Data were analysed by systematic text condensation inspired by Giorgi’s phenomenological analysis. Results The core categories describing a successful RTW process included positive encounters, increased self-understanding and support from the surroundings. While the informants on DP emphasized being seen, heard and taken seriously by the professionals, the RTW group highlighted being challenged to increase self-understanding that promoted new acting in every-day life. Being challenged on self-understanding implied increased awareness of own identity, values and resources. Support from the surroundings included support from peer participants, employer and social welfare system. Conclusion Successful RTW processes seem to comprise positive encounters, opportunities for increased self-understanding and support from significant others. An explicit focus on topics like identity, own values and resources might improve the outcome of the rehabilitation process

    Accuracy and reproducibility of automated white matter hyperintensities segmentation with lesion segmentation tool: A European multi-site 3T study

    Get PDF
    Brain vascular damage accumulate in aging and often manifest as white matter hyperintensities (WMHs) on MRI. Despite increased interest in automated methods to segment WMHs, a gold standard has not been achieved and their longitudinal reproducibility has been poorly investigated. The aim of present work is to evaluate accuracy and reproducibility of two freely available segmentation algorithms. A harmonized MRI protocol was implemented in 3T-scanners across 13 European sites, each scanning five volunteers twice (test-retest) using 2D-FLAIR. Automated segmentation was performed using Lesion segmentation tool algorithms (LST): the Lesion growth algorithm (LGA) in SPM8 and 12 and the Lesion prediction algorithm (LPA). To assess reproducibility, we applied the LST longitudinal pipeline to the LGA and LPA outputs for both the test and retest scans. We evaluated volumetric and spatial accuracy comparing LGA and LPA with manual tracing, and for reproducibility the test versus retest. Median volume difference between automated WMH and manual segmentations (mL) was −0.22[IQR = 0.50] for LGA-SPM8, −0.12[0.57] for LGA-SPM12, −0.09[0.53] for LPA, while the spatial accuracy (Dice Coefficient) was 0.29[0.31], 0.33[0.26] and 0.41[0.23], respectively. The reproducibility analysis showed a median reproducibility error of 20%[IQR = 41] for LGA-SPM8, 14% [31] for LGA-SPM12 and 10% [27] with the LPA cross-sectional pipeline. Applying the LST longitudinal pipeline, the reproducibility errors were considerably reduced (LGA: 0%[IQR = 0], p < 0.001; LPA: 0% [3], p < 0.001) compared to those derived using the cross-sectional algorithms. The DC using the longitudinal pipeline was excellent (median = 1) for LGA [IQR = 0] and LPA [0.02]. LST algorithms showed moderate accuracy and good reproducibility. Therefore, it can be used as a reliable cross-sectional and longitudinal tool in multi-site studies

    Effective Rheology of Bubbles Moving in a Capillary Tube

    Full text link
    We calculate the average volumetric flux versus pressure drop of bubbles moving in a single capillary tube with varying diameter, finding a square-root relation from mapping the flow equations onto that of a driven overdamped pendulum. The calculation is based on a derivation of the equation of motion of a bubble train from considering the capillary forces and the entropy production associated with the viscous flow. We also calculate the configurational probability of the positions of the bubbles.Comment: 4 pages, 1 figur

    Electrical modalities beyond pacing for the treatment of heart failure

    Get PDF
    In this review, we report on electrical modalities, which do not fit the definition of pacemaker, but increase cardiac performance either by direct application to the heart (e.g., post-extrasystolic potentiation or non-excitatory stimulation) or indirectly through activation of the nervous system (e.g., vagal or sympathetic activation). The physiological background of the possible mechanisms of these electrical modalities and their potential application to treat heart failure are discussed

    Stay@Work: Participatory Ergonomics to prevent low back and neck pain among workers: design of a randomised controlled trial to evaluate the (cost-)effectiveness

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Low back pain (LBP) and neck pain (NP) are a major public health problem with considerable costs for individuals, companies and society. Therefore, prevention is imperative. The Stay@Work study investigates the (cost-)effectiveness of Participatory Ergonomics (PE) to prevent LBP and NP among workers.</p> <p>Methods</p> <p>In a randomised controlled trial (RCT), a total of 5,759 workers working at 36 departments of four companies is expected to participate in the study at baseline. The departments consisting of about 150 workers are pre-stratified and randomised. The control departments receive usual practice and the intervention departments receive PE. Within each intervention department a working group is formed including eight workers, a representative of the management, and an occupational health and safety coordinator. During a one day meeting, the working group follows the steps of PE in which the most important risk factors for LBP and NP, and the most adequate ergonomic measures are identified on the basis of group consensus. The implementation of ergonomic measures at the department is performed by the working group. To improve the implementation process, so-called 'ergocoaches' are trained.</p> <p>The primary outcome measure is an episode of LBP and NP. Secondary outcome measures are actual use of ergonomic measures, physical workload, psychosocial workload, intensity of pain, general health status, sick leave, and work productivity. The cost-effectiveness analysis is performed from the societal and company perspective. Outcome measures are assessed using questionnaires at baseline and after 6 and 12 months. Data on the primary outcome as well as on intensity of pain, sick leave, work productivity, and health care costs are collected every 3 months.</p> <p>Discussion</p> <p>Prevention of LBP and NP is beneficial for workers, employers, and society. If the intervention is proven (cost-)effective, the intervention can have a major impact on LBP and NP prevention and, thereby, on work disability prevention. Results are expected in 2010.</p> <p>Trial registration</p> <p>ISRCTN27472278</p

    Myocardial tagging by Cardiovascular Magnetic Resonance: evolution of techniques--pulse sequences, analysis algorithms, and applications

    Get PDF
    Cardiovascular magnetic resonance (CMR) tagging has been established as an essential technique for measuring regional myocardial function. It allows quantification of local intramyocardial motion measures, e.g. strain and strain rate. The invention of CMR tagging came in the late eighties, where the technique allowed for the first time for visualizing transmural myocardial movement without having to implant physical markers. This new idea opened the door for a series of developments and improvements that continue up to the present time. Different tagging techniques are currently available that are more extensive, improved, and sophisticated than they were twenty years ago. Each of these techniques has different versions for improved resolution, signal-to-noise ratio (SNR), scan time, anatomical coverage, three-dimensional capability, and image quality. The tagging techniques covered in this article can be broadly divided into two main categories: 1) Basic techniques, which include magnetization saturation, spatial modulation of magnetization (SPAMM), delay alternating with nutations for tailored excitation (DANTE), and complementary SPAMM (CSPAMM); and 2) Advanced techniques, which include harmonic phase (HARP), displacement encoding with stimulated echoes (DENSE), and strain encoding (SENC). Although most of these techniques were developed by separate groups and evolved from different backgrounds, they are in fact closely related to each other, and they can be interpreted from more than one perspective. Some of these techniques even followed parallel paths of developments, as illustrated in the article. As each technique has its own advantages, some efforts have been made to combine different techniques together for improved image quality or composite information acquisition. In this review, different developments in pulse sequences and related image processing techniques are described along with the necessities that led to their invention, which makes this article easy to read and the covered techniques easy to follow. Major studies that applied CMR tagging for studying myocardial mechanics are also summarized. Finally, the current article includes a plethora of ideas and techniques with over 300 references that motivate the reader to think about the future of CMR tagging
    corecore