Body and canard effects on an attached-flow maneuver wing at Mach 1.62

A wing-body-canard configuration was tested at a Mach number of 1.62 by using both a cambered and an uncambered wing. The cambered wing was designed to produce efficient high lift by using attached supercritical crossflow and was originally tested as an isolated wing. The uncambered wing has the same planform and essentially the same thickness distribution as the cambered wing. The experiment determined the effects of a body and canards on both wings. The experimental data showed that both the body and the canards influenced the wing pressure levels, but that the attached supercritical crossflow, which was achieved in the isolated cambered-wing test, was maintained in the presence of a body and canards. Tables of experimental pressure, force, and moment data are included, as well as photographs of oil flow patterns on the upper surface

Supersonic, nonlinear, attached-flow wing design for high lift with experimental validation

Results of the experimental validation are presented for the three dimensional cambered wing which was designed to achieve attached supercritical cross flow for lifting conditions typical of supersonic maneuver. The design point was a lift coefficient of 0.4 at Mach 1.62 and 12 deg angle of attack. Results from the nonlinear full potential method are presented to show the validity of the design process along with results from linear theory codes. Longitudinal force and moment data and static pressure data were obtained in the Langley Unitary Plan Wind Tunnel at Mach numbers of 1.58, 1.62, 1.66, 1.70, and 2.00 over an angle of attack range of 0 to 14 deg at a Reynolds number of 2.0 x 10 to the 6th power per foot. Oil flow photographs of the upper surface were obtained at M = 1.62 for alpha approx. = 8, 10, 12, and 14 deg

Photon number resolution using a time-multiplexed single-photon detector

Photon number resolving detectors are needed for a variety of applications including linear-optics quantum computing. Here we describe the use of time-multiplexing techniques that allows ordinary single photon detectors, such as silicon avalanche photodiodes, to be used as photon number-resolving detectors. The ability of such a detector to correctly measure the number of photons for an incident number state is analyzed. The predicted results for an incident coherent state are found to be in good agreement with the results of a proof-of-principle experimental demonstration.Comment: REVTeX4, 6 pages, 8 eps figures, v2: minor changes, v3: changes in response to referee report, appendix added, 1 reference adde

Time-bin entangled photon holes

The general concept of entangled photon holes is based on a correlated absence of photon pairs in an otherwise constant optical background. Here we consider the specialized case when this background is confined to two well-defined time bins, which allows the formation of time-bin entangled photon holes. We show that when the typical coherent state background is replaced by a true single-photon (Fock state) background, the basic time-bin entangled photon-hole state becomes equivalent to one of the time-bin entangled photon-pair states. We experimentally demonstrate these ideas using a parametric down-conversion photon-pair source, linear optics, and post-selection to violate a Bell inequality with time-bin entangled photon holes.Comment: 6 pages, 5 figure

Demonstration of Non-Deterministic Quantum Logic Operations using Linear Optical Elements

Knill, Laflamme, and Milburn recently showed that non-deterministic quantum logic operations could be performed using linear optical elements, additional photons (ancilla), and post-selection based on the output of single-photon detectors [Nature 409, 46 (2001)]. Here we report the experimental demonstration of two logic devices of this kind, a destructive controlled-NOT (CNOT) gate and a quantum parity check. These two devices can be combined with a pair of entangled photons to implement a conventional (non-destructive) CNOT that succeeds with a probability of 1/4.Comment: 4 pages, 5 figures; Minor change

Heralded Two-Photon Entanglement from Probabilistic Quantum Logic Operations on Multiple Parametric Down-Conversion Sources

An ideal controlled-NOT gate followed by projective measurements can be used to identify specific Bell states of its two input qubits. When the input qubits are each members of independent Bell states, these projective measurements can be used to swap the post-selected entanglement onto the remaining two qubits. Here we apply this strategy to produce heralded two-photon polarization entanglement using Bell states that originate from independent parametric down-conversion sources, and a particular probabilistic controlled-NOT gate that is constructed from linear optical elements. The resulting implementation is closely related to an earlier proposal by Sliwa and Banaszek [quant-ph/0207117], and can be intuitively understood in terms of familiar quantum information protocols. The possibility of producing a ``pseudo-demand'' source of two-photon entanglement by storing and releasing these heralded pairs from independent cyclical quantum memory devices is also discussed.Comment: 5 pages, 4 figures; submitted to IEEE Journal of Selected Topics in Quantum Electronics, special issue on "Quantum Internet Technologies

An Updated Look at the Size of the U.S. Real Estate Market Portfolio

Using 1989 data on aggregate real estate values for a sample of counties, this paper develops estimates of the total value of real estate by property type in the United States. The values for commercial and residential property are also reported by region and for the forty-four largest MSAs. The estimated total value of commercial real estate is compared with the value of other investment asset classes, and implications are drawn for investment portfolios.

Heralded single-photon generation using imperfect single-photon sources and a two-photon-absorbing medium

We propose a setup for a heralded, i.e. announced generation of a pure single-photon state given two imperfect sources whose outputs are represented by mixtures of the single-photon Fock state $\ket{1}$ with the vacuum $\ket{0}$. Our purification scheme uses beam splitters, photodetection and a two-photon-absorbing medium. The admixture of the vacuum is fully eliminated. We discuss two potential realizations of the scheme.Comment: 22 pages, 8 figures (LaTeX). In version v2 we have slightly modified our setup so as to increase the success probability of single-photon generation by a factor of two. In addition, in an appendix we discuss alternative realizations of single-photon generation without a Mach-Zehnder interferometer. Three new figures have been added. Version v3 is a revised version published in Phys. Rev. A. It contains numerous minor corrections and clarifications. A new figure has been added in order to clarify our convention regarding labelling the field modes. The action of the beam splitters in the Schroedinger picture is introduced. A new reference has been include