423 research outputs found
Dye-sensitized solar cell with a titanium-oxide-modified carbon nanotube transparent electrode
Cataloged from PDF version of article.Transparent and conductive carbon-based materials are promising for window electrodes in solid-state optoelectronic devices. However, the catalytic activity to redox reaction limits their application as a working electrode in a liquid-type dye-sensitized solar cell (DSSC). In this letter, we propose and demonstrate a transparent carbon nanotubes (CNTs) film as the working electrode in a DSSC containing iodide/triiodide redox couples. This implementation is realized by inhibiting the charge-transfer kinetics at CNT/redox solution interface with an aid of thin titanium oxide film that facilitates the unidirectional flow of electrons in the cell without sacrificing the electrical and optical properties of CNT. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3610488
Effect of seasonal changes on fertility parameters of Holstein dairy cows in subtropical climate of Taiwan
Objective: The purpose of this retrospective study was to investigate the relationship between temperature-humidity index (THI), season, and conception rate (CR) of Holstein cows in central Taiwan.
Methods: The mean performance and number of observations were statistically evaluated for various parameters, including age at first service, number of days open, gestation length, CR, and calving interval for different parities.
Results: The results indicate that the mean age at first service was 493.2 days; the gestation length was similar across all cows of different parities, ranging from 275.1 to 280.7 days. The overall CR of all inseminations was significantly lower in multiparous cows (47.26%±0.22%) than in heifers (57.14%±0.11%) (p72 and during the hot season (from June to November), CRs for multiparous cows were significantly reduced compared to that for heifers, while the ratio remained unchanged among heifers for all seasons.
Conclusion: To achieve a high CR, lactating cows should be bred in winter and spring (from December to May) from the start of the seasonal breeding program, whereas the heifer should be allowed to breed in summer and fall under the subtropical climate in Taiwan
Development of superlattice CrNNbN coatings for joint replacements deposited by High Power Impulse Magnetron Sputtering
The demand for reliable coating on medical implants is ever growing. In this research, enhanced performance of medical implants was achieved by a CrN/NbN coating utilising nanoscale multilayer/superlattice structure. The advantages of the novel High Power Impulse Magnetron Sputtering technology, namely its unique highly ionised plasma were exploited to deposit dense and strongly adherent coatings on Co-Cr implants. TEM analyses revealed coating superlattice structure with bi-layer thickness of 3.5 nm. CrN/NbN deposited on Co-Cr samples showed exceptionally high adhesion, critical load values of LC2= 50 N in scratch adhesion tests. Nanoindentation tests showed high hardness of 34 GPa and Young's modulus of 447 GPa. Low coefficient of friction (µ) 0.49 and coating wear coefficient (KC) = 4.94 x 10-16 m3N-1m-1 were recorded in dry sliding tests. Metal ion release studies showed a reduction in Co, Cr and Mo release at physiological and elevated temperatures, (70 oC) to almost undetectable levels (<1 ppb). Rotating beam fatigue testing showed a significant increase in fatigue strength from 349±59 MPa (uncoated) to 539±59 MPa (coated). In vitro biological testing has been performed in order to assess the safety of the coating in biological environment, cytotoxicity, genotoxicity and sensitisation testing have been performed, all showing no adverse effects.
Keywords: Orthopaedic implant, High Power Impulse Magnetron Sputtering, Superlattice coating, Corrosion, Biocompatibility
Potential impact of invasive alien species on ecosystem services provided by a tropical forested ecosystem: a case study from Montserrat
Local stakeholders at the important but
vulnerable Centre Hills on Montserrat consider that
the continued presence of feral livestock (particularly
goats and pigs) may lead to widespread replacement of
the reserve’s native vegetation by invasive alien trees
(Java plum and guava), and consequent negative
impacts on native animal species. Since 2009, a
hunting programme to control the feral livestock has
been in operation. However long-term funding is not
assured. Here, we estimate the effect of feral livestock
control on ecosystem services provided by the forest to
evaluate whether the biodiversity conservation rationale
for continuation of the control programme is
supported by an economic case. A new practical tool
(Toolkit for Ecosystem Service Site-based Assessment)
was employed to measure and compare ecosystem
service provision between two states of the
reserve (i.e. presence and absence of feral livestock
control) to estimate the net consequences of the
hunting programme on ecosystem services provided
by the forest. Based on this we estimate that cessation
of feral livestock management would substantially
reduce the net benefits provided by the site, including a
46 % reduction in nature-based tourism (from
228,000) and 36 % reduction in harvested
wild meat (from 132,000). The
overall net benefit generated from annual ecosystem
service flows associated with livestock control in thereserve, minus the management cost, was $214,000
per year. We conclude that continued feral livestock
control is important for maintaining the current level
of ecosystem services provided by the reserve
Pubic rami and sacral insufficiency fractures resulting in osteomyelitis, vulval abscess, discharging bone fragments and pelvic instability
TESSA: A toolkit for rapid assessment of ecosystem services at sites of biodiversity conservation importance
Sites that are important for biodiversity conservation can also provide significant benefits (i.e. ecosystem services) to people. Decision-makers need to know how change to a site, whether development or restoration, would affect the delivery of services and the distribution of any benefits among stakeholders. However, there are relatively few empirical studies that present this information. One reason is the lack of appropriate methods and tools for ecosystem service assessment that do not require substantial resources or specialist technical knowledge, or rely heavily upon existing data. Here we address this gap by describing the Toolkit for Ecosystem Service Site-based Assessment (TESSA). It guides local non-specialists through a selection of relatively accessible methods for identifying which ecosystem services may be important at a site, and for evaluating the magnitude of benefits that people obtain from them currently, compared with those expected under alternative land-uses. The toolkit recommends use of existing data where appropriate and places emphasis on enabling users to collect new field data at relatively low cost and effort. By using TESSA, the users could also gain valuable information about the alternative land-uses; and data collected in the field could be incorporated into regular monitoring programmes
Bullet-induced synovitis as a cause of secondary osteoarthritis of the hip joint: A case report and review of literature
<p>Abstract</p> <p>Background</p> <p>With increasing prevalence of gunshot injuries we are seeing more patients with retained bullet fragments lodged in their bodies. Embedded lead bullets are usually considered inert after their kinetic energy has dissipated hence these are not removed routinely. However, exposure of any foreign body to synovial fluid may lead to rapid degradation and hence result in systemic absorption, causing local and systemic symptoms. We present the case of a thirty year old man who came to our out patient department with a history of progressive, severe hip pain ten years after a gun shot injury to his right hip.</p> <p>Conclusion</p> <p>The common belief that intraarticular bullets should not be removed has no benefit and may result in unwanted long term complications.</p
Joint cooperative spectrum sensing and MAC protocol design for multi-channel cognitive radio networks
Oil Palm Research in Context: Identifying the Need for Biodiversity Assessment
Oil palm cultivation is frequently cited as a major threat to tropical biodiversity as it is centered on some of the world's most biodiverse regions. In this report, Web of Science was used to find papers on oil palm published since 1970, which were assigned to different subject categories to visualize their research focus. Recent years have seen a broadening in the scope of research, with a slight growth in publications on the environment and a dramatic increase in those on biofuel. Despite this, less than 1% of publications are related to biodiversity and species conservation. In the context of global vegetable oil markets, palm oil and soyabean account for over 60% of production but are the subject of less than 10% of research. Much more work must be done to establish the impacts of habitat conversion to oil palm plantation on biodiversity. Results from such studies are crucial for informing conservation strategies and ensuring sustainable management of plantations
Functional material features of Bombyx mori silk light versus heavy chain proteins
Bombyx mori (BM) silk fibroin is composed of two different subunits; heavy chain and light chain fibroin linked by a covalent disulphide bond. Current methods of separating the two silk fractions is complicated and produces inadequate quantities of the isolated components for the study of the individual light and heavy chain silks with respect to new materials. We report a simple method of separating silk fractions using formic acid. The formic acid treatment partially releases predominately the light chain fragment (soluble fraction) and then the soluble fraction and insoluble fractions can be converted into new materials. The regenerated original (total) silk fibroin and the separated fractions (soluble vs. insoluble) had different molecular weights and showed distinctive pH stabilities against aggregation/precipitation based on particle charging. All silk fractions could be electrospun to give fibre mats with viscosity of the regenerated fractions being the controlling factor for successful electrospinning. The silk fractions could be mixed to give blends with different proportions of the two fractions to modify the diameter and uniformity of the electrospun fibres formed. The soluble fraction containing the light chain was able to modify the viscosity by thinning the insoluble fraction containing heavy chain fragments, perhaps analogous to its role in natural fibre formation where the light chain provides increased mobility and the heavy chain producing shear thickening effects. The simplicity of this new separation method should enable access to these different silk protein fractions and accelerate the identification of methods, modifications and potential applications of these materials in biomedical and industrial applications
- …