85 research outputs found
Impact of Conservation Agriculture on Soil Erosion in the Annual Cropland of the Apulia Region (Southern Italy) Based on the RUSLE-GIS-GEE Framework
The processes of soil erosion and land degradation are more rapid in the case of inappropriate agricultural management, which leads to increased soil loss rates. Moreover, climatic conditions are one of the most important determining factors affecting agriculture, especially in the Mediterranean areas featuring irregular rainfall and high summer temperatures. Conservation agriculture (CA) can make a significant contribution to reducing soil erosion risk on the annual cropland (ACL) of the Mediterranean region in comparison with conventional management (CM). The objective of this study is to provide soil loss rate maps and calculate the values for each altitude and slope class and their combination for the Apulia region in four annual production cycles for the scenarios CM and CA. The present study estimates the significance of the adoption of CA on soil erosion assessment at regional scale based on the Revised Universal Soil Loss Equation (RUSLE) model. The parameters of the RUSLE model were estimated by using remote sensing (RS) data. The erosion probability zones were determined through a Geographic Information System (GIS) and Google Earth Engine (GEE) approach. Digital terrain model (DTM) at 8 m, ACL maps of the Apulia region, and rainfall and soil data were used as an input to identify the most erosion-prone areas. Our results show a 7.5% average decrease of soil loss rate during the first period of adoption of the four-year crop cycle—from 2.3 t ha−1 y−1 with CM to 2.1 t ha−1 y−1 with the CA system. CA reduced soil loss rate compared to CM in all classes, from 10.1% in hill class to 14.1% for hill + low slope class. These results can therefore assist in the implementation of effective soil management systems and conservation practices to reduce soil erosion risk in the Apulia region and in the Mediterranean basin more generally
Evaporative Deposition Patterns Revisited: Spatial Dimensions of the Deposit
A model accounting for finite spatial dimensions of the deposit patterns in
the evaporating sessile drops of colloidal solution on a plane substrate is
proposed. The model is based on the assumption that the solute particles occupy
finite volume and hence these dimensions are of the steric origin. Within this
model, the geometrical characteristics of the deposition patterns are found as
functions of the initial concentration of the solute, the initial geometry of
the drop, and the time elapsed from the beginning of the drying process. The
model is solved analytically for small initial concentrations of the solute and
numerically for arbitrary initial concentrations of the solute. The agreement
between our theoretical results and the experimental data is demonstrated, and
it is shown that the observed dependence of the deposit dimensions on the
experimental parameters can indeed be attributed to the finite dimensions of
the solute particles. These results are universal and do not depend on any free
or fitting parameters; they are important for understanding the evaporative
deposition and may be useful for creating controlled deposition patterns.Comment: 34 pages, 14 figures, LaTeX; submitted to Physical Review
Semi-classical study of the Quantum Hall conductivity
The semi-classical study of the integer Quantum Hall conductivity is
investigated for electrons in a bi-periodic potential .
The Hall conductivity is due to the tunnelling effect and we concentrate our
study to potentials having three wells in a periodic cell. A non-zero
topological conductivity requires special conditions for the positions, and
shapes of the wells. The results are derived analytically and well confirmed by
numerical calculations.Comment: 23 pages, 13 figure
The High Mobility Group A1 (HMGA1) Chromatin Architectural Factor Modulates Nuclear Stiffness in Breast Cancer Cells
13siPlasticity is an essential condition for cancer cells to invade surrounding tissues. The nucleus is the most rigid cellular organelle and it undergoes substantial deformations to get through environmental constrictions. Nuclear stiffness mostly depends on the nuclear lamina and chromatin, which in turn might be affected by nuclear architectural proteins. Among these is the HMGA1 (High Mobility Group A1) protein, a factor that plays a causal role in neoplastic transformation and that is able to disentangle heterochromatic domains by H1 displacement. Here we made use of atomic force microscopy to analyze the stiffness of breast cancer cellular models in which we modulated HMGA1 expression to investigate its role in regulating nuclear plasticity. Since histone H1 is the main modulator of chromatin structure and HMGA1 is a well-established histone H1 competitor, we correlated HMGA1 expression and cellular stiffness with histone H1 expression level, post-translational modifications, and nuclear distribution. Our results showed that HMGA1 expression level correlates with nuclear stiffness, is associated to histone H1 phosphorylation status, and alters both histone H1 chromatin distribution and expression. These data suggest that HMGA1 might promote chromatin relaxation through a histone H1-mediated mechanism strongly impacting on the invasiveness of cancer cells-openopenSenigagliesi B, Penzo C, Severino LU, Maraspini R, Petrosino S, Morales-Navarrete H, Pobega E, Ambrosetti E, Parisse P, Pegoraro S, Manfioletti G, Casalis L, Sgarra RSenigagliesi, Beatrice; Penzo, C; Severino, Lu; Maraspini, R; Petrosino, Sara; Morales-Navarrete, H; Pobega, E; Ambrosetti, E; Parisse, P; Pegoraro, S; Manfioletti, G; Casalis, L; Sgarra,
Stable directions for small nonlinear Dirac standing waves
We prove that for a Dirac operator with no resonance at thresholds nor
eigenvalue at thresholds the propagator satisfies propagation and dispersive
estimates. When this linear operator has only two simple eigenvalues close
enough, we study an associated class of nonlinear Dirac equations which have
stationary solutions. As an application of our decay estimates, we show that
these solutions have stable directions which are tangent to the subspaces
associated with the continuous spectrum of the Dirac operator. This result is
the analogue, in the Dirac case, of a theorem by Tsai and Yau about the
Schr\"{o}dinger equation. To our knowledge, the present work is the first
mathematical study of the stability problem for a nonlinear Dirac equation.Comment: 62 page
INVESTIGATING THE SEISMIC RESPONSE OF URM WALLS WITH IRREGULAR OPENING LAYOUT THROUGH DIFFERENT MODELING APPROACHES
The façade and internal walls of unreinforced masonry (URM) buildings often present an irregular opening layout, due to architectural reasons or modifications to the structure, which make the expected seismic damage pattern less predictable a priori. Therefore, the discretization of the walls in structural components is not standardized, conversely to cases with a regular opening layout for which the available modeling methods are corroborated by seismic damage surveys reporting recurrent failure patterns. The structural component discretization is a relevant step for the code-conforming seismic assessment, typically based on comparing the internal forces and drifts of each component to strength criteria and drift thresholds. Therefore, the lack of well-established approaches can significantly influence the assessment. The issue is even more evident when the structural components must be identified a priori in the modeling stage, namely for equivalent frame models. The applicability of available methods for discretization of URM walls with irregular opening layout has been already investigated in literature, but a conclusive judgment requires further studies. In this context, this paper presents an overview of the preliminary results addressing the numerical modeling of this type of walls within the framework of the DPC-ReLUIS 2022-2024 project (Subtask 10.3), funded by the Italian Department of Civil Protection. The Subtask aims to propose consensus-based recommendations for researchers and practitioners which can contribute to harmonize the use of different modeling approaches. Seven research groups are involved in the research, adopting different modeling approaches and computer codes, but similar assumptions and the same analysis method (pushover) are used. The benchmark URM structure illustrated in the paper is a two-story wall from which four configurations with increasing irregularity of opening layout were derived. The results of four modeling approached are presented. Three of them reproduce the mechanical response of masonry at the material scale by means of FE models implemented in OpenSees, DIANA and Abaqus software, while the remaining approach describes the mechanical response of masonry at the macro-element scale in 3DMacro software. Results were compared in terms of capacity curves, predicted failure mechanisms and evolution of internal forces in piers. The adoption of consistent assumptions among the different approaches led to an overall agreement of predictions at both wall and pier scales, particularly in terms of damage pattern with higher concentration of damage at the ground story. Despite that, differences on the pushover curves have been highlighted. They are mainly due to some deviations of the internal forces in squat piers deriving from a complex load flow in these elements
Investigating the seismic response of URM walls with irregular opening layout through different modeling approaches
TThe façade and internal walls of unreinforced masonry (URM) buildings often present an
irregular opening layout, due to architectural reasons or modifications to the structure, which
make the expected seismic damage pattern less predictable a priori. Therefore, the
discretization of the walls in structural components is not standardized, conversely to cases
with a regular opening layout for which the available modeling methods are corroborated by
seismic damage surveys reporting recurrent failure patterns. The structural component
discretization is a relevant step for the code-conforming seismic assessment, typically based
on comparing the internal forces and drifts of each component to strength criteria and drift
thresholds. Therefore, the lack of well-established approaches can significantly influence the
assessment. The issue is even more evident when the structural components must be identified
a priori in the modeling stage, namely for equivalent frame models. The applicability of
available methods for discretization of URM walls with irregular opening layout has been
already investigated in literature, but a conclusive judgment requires further studies.
In this context, this paper presents an overview of the preliminary results addressing the
numerical modeling of this type of walls within the framework of the DPC-ReLUIS 2022-2024
project (Subtask 10.3), funded by the Italian Department of Civil Protection. The Subtask
aims to propose consensus-based recommendations for researchers and practitioners which
can contribute to harmonize the use of different modeling approaches. Seven research groups
are involved in the research, adopting different modeling approaches and computer codes,
but similar assumptions and the same analysis method (pushover) are used. The benchmark
URM structure illustrated in the paper is a two-story wall from which four configurations
with increasing irregularity of opening layout were derived. The results of four modeling
approached are presented. Three of them reproduce the mechanical response of masonry at
the material scale by means of FE models implemented in OpenSees, DIANA and Abaqus
software, while the remaining approach describes the mechanical response of masonry at the
macro-element scale in 3DMacro software. Results were compared in terms of capacity
curves, predicted failure mechanisms and evolution of internal forces in piers. The adoption
of consistent assumptions among the different approaches led to an overall agreement of
predictions at both wall and pier scales, particularly in terms of damage pattern with higher
concentration of damage at the ground story. Despite that, differences on the pushover curves
have been highlighted. They are mainly due to some deviations of the internal forces in squat
piers deriving from a complex load flow in these elements.DPC - Dipartimento della Protezione Civile, Presidenza del Consiglio dei Ministri(LA/P/0112/2020
Glioma-associated stem cells: A novel class of tumor-supporting cells able to predict prognosis of human low-grade gliomas.
Background: Translational medicine aims at transferring advances in basic science research into new approaches for diagnosis and treatment of diseases. Low-grade gliomas (LGG) have a heterogeneous clinical behavior that can be only partially predicted employing current state-of-the-art markers, hindering the decision-making process. To deepen our comprehension on tumor heterogeneity, we dissected the mechanism of interaction between tumor cells and relevant components of the neoplastic environment, isolating, from LGG and high-grade gliomas (HGG), proliferating stem cell lines from both the glioma stroma and, where possible, the neoplasm. Methods and Findings: We isolated glioma-associated stem cells (GASC) from LGG (n=40) and HGG (n=73). GASC showed stem cell features, anchorage-independent growth, and supported the malignant properties of both A172 cells and human glioma-stem cells, mainly through the release of exosomes. Finally, starting from GASC obtained from HGG (n=13) and LGG (n=12) we defined a score, based on the expression of 9 GASC surface markers, whose prognostic value was assayed on 40 subsequent LGG-patients. At the multivariate Cox analysis, the GASC-based score was the only independent predictor of overall survival and malignant progression free-survival. Conclusions: The microenvironment of both LGG and HGG hosts non-tumorigenic multipotent stem cells that can increase in vitro the biological aggressiveness of glioma-initiating cells through the release of exosomes. The clinical importance of this finding is supported by the strong prognostic value associated with the characteristics of GASC. This patient-based approach can provide a groundbreaking method to predict prognosis and to exploit novel strategies that target the tumor stroma
Shake-table testing of a stone masonry building aggregate: overview of blind prediction study
City centres of Europe are often composed of unreinforced masonry structural aggregates, whose seismic response is challenging to predict. To advance the state of the art on the seismic response of these aggregates, the Adjacent Interacting Masonry Structures (AIMS) subproject from Horizon 2020 project Seismology and Earthquake Engineering Research Infrastructure Alliance for Europe (SERA) provides shake-table test data of a two-unit, double-leaf stone masonry aggregate subjected to two horizontal components of dynamic excitation. A blind prediction was organized with participants from academia and industry to test modelling approaches and assumptions and to learn about the extent of uncertainty in modelling for such masonry aggregates. The participants were provided with the full set of material and geometrical data, construction details and original seismic input and asked to predict prior to the test the expected seismic response in terms of damage mechanisms, base-shear forces, and roof displacements. The modelling approaches used differ significantly in the level of detail and the modelling assumptions. This paper provides an overview of the adopted modelling approaches and their subsequent predictions. It further discusses the range of assumptions made when modelling masonry walls, floors and connections, and aims at discovering how the common solutions regarding modelling masonry in general, and masonry aggregates in particular, affect the results. The results are evaluated both in terms of damage mechanisms, base shear forces, displacements and interface openings in both directions, and then compared with the experimental results. The modelling approaches featuring Discrete Element Method (DEM) led to the best predictions in terms of displacements, while a submission using rigid block limit analysis led to the best prediction in terms of damage mechanisms. Large coefficients of variation of predicted displacements and general underestimation of displacements in comparison with experimental results, except for DEM models, highlight the need for further consensus building on suitable modelling assumptions for such masonry aggregates
- …