Rotational Cooling of Polar Molecules by Stark-tuned Cavity Resonance

A general scheme for rotational cooling of diatomic heteronuclear molecules is proposed. It uses a superconducting microwave cavity to enhance the spontaneous decay via Purcell effect. Rotational cooling can be induced by sequentially tuning each rotational transition to cavity resonance, starting from the highest transition level to the lowest using an electric field. Electrostatic multipoles can be used to provide large confinement volume with essentially homogeneous background electric field.Comment: 10 pages, 6 figure

Vortex Matter Transition in Bi2{}_2Sr2{}_2CaCu2{}_2O8+y{}_{8+y} under Tilted Fields

Vortex phase diagram under tilted fields from the $c$ axis in Bi${}_2$Sr${}_2$CaCu${}_2$O${}_{8+y}$ is studied by local magnetization hysteresis measurements using Hall probes. When the field is applied at large angles from the $c$ axis, an anomaly ($H_p^\ast$) other than the well-known peak effect ($H_p$) are found at fields below $H_p$. The angular dependence of the field $H_p^\ast$ is nonmonotonic and clearly different from that of $H_p$ and depends on the oxygen content of the crystal. The results suggest existence of a vortex matter transition under tilted fields. Possible mechanisms of the transition are discussed.Comment: Revtex, 4 pages, some corrections are adde

Characterization of a Plain Broadband Textile PIFA

Bandwidth characteristic of a wearable antenna is one of the major factors in determining its usability on the human body. In this work, a planar inverted-F antenna (PIFA) structure is proposed to achieve a large bandwidth to avoid serious antenna reflection coefficient detuning when placed in proximity of the body. The proposed structure is designed based on a simple structure, in order to provide practicality in application and maintain fabrication simplicity. Two different types of conductive textiles, namely Pure Copper Polyester Taffeta Fabric (PCPTF) and ShieldIt, are used in order to proof its concept, in comparison with a metallic antenna made from copper foil. The design is spaced and fabricated using a 6 mm thick fleece fabric. To cater for potential fabrication and material measurement inaccuracies, both antennas' performance are also investigated and analyzed with varying physical and material parameters. From this investigation, it is found that the proposed structure's extended bandwidth enabled the antenna to function with satisfactory on-body reflection coefficients, despite unavoidable gain and efficiency reduction

Genetic characterization of Porcine Circovirus 2 found in Malaysia

Background: Porcine circovirus type 2 is the primary etiological agent associated with a group of complex multi-factorial diseases classified as Porcine Circovirus Associated Diseases (PCVAD). Sporadic cases reported in Malaysia in 2007 caused major economic losses to the 2.2 billion Malaysian ringgit (MYR) (approximately 0.7 billion US dollar) swine industry. The objective of the present study was to determine the association between the presence of PCV2 and occurrences of PCVAD. Results: This study showed that 37 out of 42 farms sampled were positive for PCV2 using PCR screening. Thirteen whole genome of PCV2 isolates from pigs with typical PCVAD symptoms were successfully sequenced. These isolates shared 98.3-99.2% similarities with sequences of isolates from the Netherlands. All thirteen isolates fell into the same clade as PCV2b isolates from other countries. Amino acid sequence analysis of the putative capsid protein (ORF2) of the PCV2 revealed that there are three clusters found in Malaysia, namely cluster 1C and 1A/1B. Of interest, three of the isolates (isolates Mal 005, Mal 006 and Mal 010) had a proline substitution for arginine or isoleucine encoded at nt. position 88-89. Eight of the isolates had mutations at the C terminus of the putative capsid protein suggestive of higher pathogenicity which may account for the high reports of PCVAD clinical symptoms in 2007. Conclusion: Phylogenetic study suggests that there may be a link between movements of animals by import of breeders into the country being the route of entry of the virus. While it is not possible to eradicate the virus from commercial pigs, the swine industry in Malaysia can be safeguarded by control measures implemented throughout the country. These measures should include improved biosecurity, disease surveillance; vaccination as well as enforcement of regulations formulated to control and prevent the spread of this disease on a national scale

Correlation Between Polymer Packing And Gas Transport Properties For Co2/N2 Separation In Glassy Fluorinated Polyimide Membrane

Gas separation performance of a membrane highly hinges on its physical properties. In this study, the interplay between polymer packing of a membrane and its gas transport behaviours (permeability and selectivity) was investigated through a series of 6FDA-DAM:DABA (3:2) polyimide membranes with different polymer compactness. The chemical structure and the polymer packing of the resulting membrane were characterized using attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and packing density measurement, respectively. CO2/N2 separation efficiency of the membrane was evaluated at 25oC with feed pressure up to 6 bar. N2 permeability was found to rely on the membrane’s packing density, which signified its greater dependence on molecular sieving. In contrast, sorption showed a more vital role in determining the CO2 permeability. In this work, the membrane with a final thickness of 97±2 μm had successfully surpassed the Robeson’s 2008 upper bound plot with a CO2 permeability of 83 Barrer and CO2/N2 selectivity of 97 at 3 bar permeation

High Aspect Pattern Formation by Integration of Micro Inkjetting and Electroless Plating

This paper reports on formation of high aspect micro patterns on low temperature co-fired ceramic (LTCC) substrates by integrating micro inkjetting with electroless plating. Micro inkjetting was realized by using an inkjetting printer that ejects ink droplets from a printhead. This printhead consists of a glass nozzle with a diameter of 50 micrometers and a piezoelectric transducer that is coated on the nozzle. The silver colloidal solution was inkjetted on a sintered CT800 ceramic substrate, followed by curing at 200 degrees C for 60 minutes. As a result, the silver trace with a thickness of 200 nm was obtained. The substrate, with the ejected silver thin film as the seed layer, was then immersed into a preinitiator solution to coat a layer of palladium for enhancing the deposition of nickel. Electroless nickel plating was successfully conducted at a rate of 0.39 micrometers /min, and the thickness of traces was plated up to 84 micrometers. This study demonstrates that the integration of inkjetting with plating is an effective method to form high aspect patterns at the demand location.Comment: Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/handle/2042/16838

Evidence for Surface Andreev Bound states in Cuprate Superconductors from Penetration Depth Measurements

Tunneling and theoretical studies have suggested that Andreev bound states form at certain surfaces of unconventional superconductors. Through studies of the temperature and field dependence of the in-plane magnetic penetration depth lambda_ab at low temperature, we have found strong evidence for the presence of these states in clean single crystal YBCO and BSCCO. Crystals cut to expose a [110] interface show a strong upturn in lambda_ab at around 7K, when the field is oriented so that the supercurrents flow around this surface. In YBCO this upturn is completely suppressed by a field of ~0.1 T.Comment: 4 pages 2 column revtex + 4 postscript figures. Submitted to PR

A feasibility study of perioperative vitamin D supplementation in patients undergoing colorectal cancer resection

BackgroundVitamin D supplementation improves colorectal cancer (CRC) survival outcomes in randomized trials. The aim of this study was to test the feasibility, safety and efficacy of vitamin D supplementation in the pre- and perioperative period in patients undergoing CRC surgery.MethodsPatients were given 3200IU oral cholecalciferol (D3) per day perioperatively. Serial serum 25-hydroxyvitamin (25OHD) was measured by liquid chromatography tandem mass spectrometry and compared to untreated CRC controls. 25OHD and C-reactive protein (CRP) levels were compared using adjusted generalized linear mixed-effects models.ResultsA total of 122 patients underwent serial perioperative sampling, including 41 patients given high-dose perioperative supplementation. Supplementation was well-tolerated with no adverse or serious adverse events related to supplementation reported. Pre-operative supplementation increased 25OHD levels on the day of surgery (103.9 vs. 42.5 nmol/l, P = 8.2E–12). Supplementation increased 25OHD levels at all post-operative timepoints (P < 0.001) and attenuated the post-operative drop in 25OHD (46 vs. 24% drop, P = 3.0E–4). Rate of vitamin D peri-operative insufficiency was significantly less in those on supplementation (e.g., day 3–5, 14 vs. 84%, P = 1.41E–08), with multivariate modeling across all timepoints indicating a ∼59 nmol/l higher 25OHD compared to control patients (P = 3.7E–21). Post-operative CRP was lower in patients taking supplementation (e.g., day 3–5 timepoint; 129 vs. 81 mg/l, P = 0.04).ConclusionHigh dose pre-operative vitamin D supplementation is associated with higher perioperative 25OHD levels, lower rates of vitamin D insufficiency and reduced early post-operative CRP. Alongside published evidence for a beneficial effect of vitamin D on CRC survival outcomes, these novel findings provide strong rationale for early initiation of vitamin D supplementation after a diagnosis of CRC

NRF2-driven miR-125B1 and miR-29B1 transcriptional regulation controls a novel anti-apoptotic miRNA regulatory network for AML survival

Transcription factor NRF2 is an important regulator of oxidative stress. It is involved in cancer progression, and has abnormal constitutive expression in acute myeloid leukaemia (AML). Posttranscriptional regulation by microRNAs (miRNAs) can affect the malignant phenotype of AML cells. In this study, we identified and characterised NRF2-regulated miRNAs in AML. An miRNA array identified miRNA expression level changes in response to NRF2 knockdown in AML cells. Further analysis of miRNAs concomitantly regulated by knockdown of the NRF2 inhibitor KEAP1 revealed the major candidate NRF2-mediated miRNAs in AML. We identified miR-125B to be upregulated and miR-29B to be downregulated by NRF2 in AML. Subsequent bioinformatic analysis identified putative NRF2 binding sites upstream of the miR-125B1 coding region and downstream of the mir-29B1 coding region. Chromatin immunoprecipitation analyses showed that NRF2 binds to these antioxidant response elements (AREs) located in the 5′ untranslated regions of miR-125B and miR-29B. Finally, primary AML samples transfected with anti-miR-125B antagomiR or miR-29B mimic showed increased cell death responsiveness either alone or co-treated with standard AML chemotherapy. In summary, we find that NRF2 regulation of miR-125B and miR-29B acts to promote leukaemic cell survival, and their manipulation enhances AML responsiveness towards cytotoxic chemotherapeutics