2,947 research outputs found
Cavitation Induction by Projectile Impacting on a Water Jet
The present paper focuses on the simulation of the high-velocity impact of a projectile impacting on a water-jet, causing the onset, development and collapse of cavitation. The simulation of the fluid motion is carried out using an explicit, compressible, density-based solver developed by the authors using the OpenFOAM library. It employs a barotropic two-phase flow model that simulates the phase-change due to cavitation and considers the co-existence of non-condensable and immiscible air. The projectile is considered to be rigid while its motion through the computational domain is modelled through a direct-forcing Immersed Boundary Method. Model validation is performed against the experiments of Field et al. [Field, J., Camus, J. J., Tinguely, M., Obreschkow, D., Farhat, M., 2012. Cavitation in impacted drops and jets and the effect on erosion damage thresholds. Wear 290–291, 154–160. doi:10.1016/j.wear.2012.03.006. URL http://www.sciencedirect.com/science/article/pii/S0043164812000968 ], who visualised cavity formation and shock propagation in liquid impacts at high velocities. Simulations unveil the shock structures and capture the high-speed jetting forming at the impact location, in addition to the subsequent cavitation induction and vapour formation due to refraction waves. Moreover, model predictions provide quantitative information and a better insight on the flow physics that has not been identified from the reported experimental data, such as shock-wave propagation, vapour formation quantity and induced pressures. Furthermore, evidence of the Richtmyer-Meshkov instability developing on the liquid-air interface are predicted when sufficient dense grid resolution is utilised
Postoperative imaging surveillance and endoleak management after endovascular repair of thoracic aortic aneurysms
Phonon Dynamics in the Generalized Kitaev Spin Liquid
Candidate materials for the Kitaev spin liquid generically have residual
interactions beyond the Kitaev coupling. It therefore becomes necessary to
understand how signatures of the quantum spin liquid, e.g., fractionalization
of the spin excitations, are affected by the presence of these interactions.
Recently it was shown that phonon dynamics is an indirect but effective probe
to study fractionalized excitations in the Kitaev spin liquid. Ultrasound
experiments can measure sound attenuation, which should show characteristic
temperature and angular dependence of the sound attenuation coefficient if the
scattering of phonons happens predominantly on Majorana fermions. So far the
computation of the sound attenuation was only done in the pure spin-phonon
coupled Kitaev model, without taking into account residual interactions. In
order to understand experimental signatures, here we present a mean-field study
of the sound attenuation in the generalized -- model, which is
relevant to candidate materials. Our findings show that as long as the system
is in the spin liquid phase, characteristic features of the sound attenuation
remain observable even in the presence of residual interactions.Comment: 15 pages, 7 figure
A multilevel longitudinal study of experiencing virtual presence in adolescence: the role of anxiety and openness to experience in the classroom
Presence describes the feeling of reality and immersion that users of virtual/internet environments have. Importantly, it has been suggested that there are individual and contextual differences regarding susceptibility to presence. These aspects of presence have been linked to both beneficial and disadvantageous uses of the internet, such as online therapeutic applications and addictive internet behaviours. In the present study, presence was studied in relation to individual anxiety symptoms and classroom-level openness to experience (OTE) using a normative sample of 648 adolescents aged between 16 and 18 years. Presence was assessed with the Presence II questionnaire, anxiety symptoms with the relevant subscales of the SCL-90-R, and OTE with the Five Factor Questionnaire. A three-level hierarchical linear model was calculated. Results showed that experiencing presence in virtual environments dropped between the ages of 16 and 18 years. Additionally, although anxiety symptoms were associated with higher presence at 16 years, this association decreased with age. Results also demonstrated that adolescents in classrooms higher on OTE reported reduced level of experiencing presence. The practical and theoretical implications of these findings are discussed
Cognitively-inspired Agent-based Service Composition for Mobile & Pervasive Computing
Automatic service composition in mobile and pervasive computing faces many
challenges due to the complex and highly dynamic nature of the environment.
Common approaches consider service composition as a decision problem whose
solution is usually addressed from optimization perspectives which are not
feasible in practice due to the intractability of the problem, limited
computational resources of smart devices, service host's mobility, and time
constraints to tailor composition plans. Thus, our main contribution is the
development of a cognitively-inspired agent-based service composition model
focused on bounded rationality rather than optimality, which allows the system
to compensate for limited resources by selectively filtering out continuous
streams of data. Our approach exhibits features such as distributedness,
modularity, emergent global functionality, and robustness, which endow it with
capabilities to perform decentralized service composition by orchestrating
manifold service providers and conflicting goals from multiple users. The
evaluation of our approach shows promising results when compared against
state-of-the-art service composition models.Comment: This paper will appear on AIMS'19 (International Conference on
Artificial Intelligence and Mobile Services) on June 2
Model-based design of AM components to enable decentralized digital manufacturing systems
Additive manufacturing (AM) is a versatile technology that could add flexibility in manufacturing processes, whether implemented alone or along other technologies. This technology enables on-demand production and decentralized production networks, as production facilities can be located around the world to manufacture products closer to the final consumer (decentralized manufacturing). However, the wide adoption of additive manufacturing technologies is hindered by the lack of experience on its implementation, the lack of repeatability among different manufacturers and a lack of integrated production systems. The later, hinders the traceability and quality assurance of printed components and limits the understanding and data generation of the AM processes and parameters. In this article, a design strategy is proposed to integrate the different phases of the development process into a model-based design platform for decentralized manufacturing. This platform is aimed at facilitating data traceability and product repeatability among different AM machines. The strategy is illustrated with a case study where a car steering knuckle is manufactured in three different facilities in Sweden and Italy
Cardiorespiratory fitness levels and their association with cardiovascular profile in patients with rheumatoid arthritis: a cross-sectional study.
OBJECTIVE: The aim of this study was to investigate the association of different physical fitness levels [assessed by the maximal oxygen uptake (VO2max) test] with cardiovascular disease (CVD) risk factors in patients with RA. METHODS: A total of 150 RA patients were assessed for cardiorespiratory fitness with a VO2max test and, based on this, were split in three groups using the 33rd (18.1 ml/kg/min) and 66th (22.4 ml/kg/min) centiles. Classical and novel CVD risk factors [blood pressure, body fat, insulin resistance, cholesterol, triglycerides, high-density lipoprotein (HDL), physical activity, CRP, fibrinogen and white cell count], 10-year CVD risk, disease activity (DAS28) and severity (HAQ) were assessed in all cases. RESULTS: Mean VO2max for all RA patients was 20.9 (s.d. 5.7) ml/kg/min. The 10-year CVD risk (P = 0.003), systolic blood pressure (P = 0.039), HDL (P = 0.017), insulin resistance and body fat (both at P < 0.001), CRP (P = 0.005), white blood cell count (P = 0.015) and fibrinogen (P < 0.001) were significantly different between the VO2max tertiles favouring the group with the higher VO2max levels. In multivariate analyses of variance, VO2max was significantly associated with body fat (P < 0.001), HDL (P = 0.007), insulin resistance (P < 0.003) and 10-year CVD risk (P < 0.001), even after adjustment for DAS28, HAQ and physical activity. CONCLUSION: VO2max levels are alarmingly low in RA patients. Higher levels of VO2max are associated with a better cardiovascular profile in this population. Future studies need to focus on developing effective behavioural interventions to improve cardiorespiratory fitness in RA
- …