TOFtracker: combination of time-of-flight and high-accuracy bidimensional tracking in a single gaseous detector

A 5-gap timing RPC equipped with patterned electrodes coupled to both charge-sensitive and timing circuits yields a time accuracy of 77 ps along with a position accuracy of 38 μm. These results were obtained by calculating the straight-line fit residuals to the positions provided by a 3-layer telescope made out of identical detectors, detecting almost perpendicular cosmic-ray muons. The device may be useful for particle identification by time-of-flight, where simultaneous measurements of trajectory and time are necessary

Hybrid Pixel Detector Development for the Linear Collider Vertex Tracker

In order to fully exploit the physics potential of the future high energy e+e- linear collider, a Vertex Tracker able to provide particle track extrapolation with very high resolution is needed. Hybrid Si pixel sensors are an attractive technology due to their fast read-out capabilities and radiation hardness. A novel pixel detector layout with interleaved cells has been developed to improve the single point resolution. Results of the characterisation of the first processed prototypes by electrostatic measurements and charge collection studies are discussed.Comment: 5 pages, 1 figure, to appear in the Proceedings of the 9th Int. Workshop on Vertex Detectors, Lake Michigan MI (USA), September~200

Numerical Analysis on the Optimisation of Thermal Comfort Levels in an Office Located inside a Historical Building

The present study examines the possibility of thermal comfort optimisation inside an office room where, due to historical heritage, it is possible to modify neither the energetic characteristic of the envelope nor the position of the inlet air vents. The distribution of global and local thermal comfort indices is evaluated in both heating and cooling conditions by establishing a computational fluid dynamics (CFD) model validated against experimental data. The obtained results demonstrate a striking asymmetry of the air velocity and temperature distribution due to the low energy efficiency of the building. In heating mode, the predicted mean vote (PMV) values were improved if the discharged air from the fan coil was at its maximal velocity. However, at the same time, the vertical air temperature gradient increased by around 0.5 C in each working station. In the cooling condition, in the absence of the solar radiation, the minimal air-flow rate satisfied the acceptable range of the draught rate (DR), whereas in the presence of a solar load, it could not meet the required cooling load in all positions, leading to higher floor temperature. The findings of this study allow for identifying and rearranging the optimal position of working stations in terms of thermal comfort

Automated detection of unfair clauses in online consumer contracts

Consumer contracts too often present clauses that are potentially unfair to the subscriber. We present an experimental study where machine learning is employed to automatically detect such potentially unfair clauses in online contracts. Results show that the proposed system could provide a valuable tool for lawyers and consumers alike

Influence of different heating systems on thermal comfort perception: a dynamic and CFD analysis

In this paper, we investigate the influence of different heating systems on the thermal comfort indexes, Predicted Mean Vote (PMV) and Predicted Percentage of Dissatisfied (PPD), for a residential apartment located in Bologna (Italy). The apartment has an area of 40 m2 and is located on the ground floor of 4 floors building. The envelop consists in horizontal perforated bricks with internal thermal insulation material and two windows. The analyses are performed employing Trnsys, a commercial dynamic simulation software and Simcenter STAR-CCM+, a multiphysics computational fluid dynamics (CFD) software. The CFD analysis regards a steady condition of a typical winter day in Bologna. Thermal comfort indexes and thermal energy demand are studied comparing two different heating generation systems existing in the considered apartment: a condensing gas boiler coupled with radiators as terminal emitters and an air-to-air heat pump. By crossing the results obtained by the dynamical approach and by the CFD simulations, a two-objective methodology where energy consumption is minimised while thermal comfort is obtained, is presented

The Force Awakens: Artificial intelligence for consumer law

Recent years have been tainted by market practices that continuously expose us, as consumers, to new risks and threats. We have become accustomed, and sometimes even resigned, to businesses monitoring our activities, examining our data, and even meddling with our choices. Artificial Intelligence (AI) is often depicted as a weapon in the hands of businesses and blamed for allowing this to happen. In this paper, we envision a paradigm shift, where AI technologies are brought to the side of consumers and their organizations, with the aim of building an efficient and effective counter-power. AI-powered tools can support a massive-scale automated analysis of textual and audiovisual data, as well as code, for the benefit of consumers and their organizations. This in turn can lead to a better oversight of business activities, help consumers exercise their rights, and enable the civil society to mitigate information overload. We discuss the societal, political, and technological challenges that stand before that vision

Performances of multi-gap timing RPCs for relativistic ions in the range Z=1-6

We present the performance of Multi-gap timing RPCs under irradiation by fully stripped relativistic ions (gamma*beta=2.7, Z=1-6). A time resolution of 80 ps at high efficiency has been obtained by just using standard `off the shelf' 4-gap timing RPCs from the new HADES ToF wall. The resolution worsened to 100 ps for ~ 1 kHz/cm2 proton flux and for ~ 100 Hz/cm2 Carbon flux. The chambers were operated at a standard field of E=100 kV/cm and showed a high stability during the experiment, supporting the fact that RPCs are a convenient choice when accommodating a very broad range of ionizing particles is needed. The data provides insight in the region of very highly ionizing particles (up to x 36 mips) and can be used to constrain the existing avalanche and Space-Charge models far from the usual `mip valley'. The implications of these results for the general case of detection based on secondary processes (n, gamma) resulting in highly ionizing particles with characteristic energy distributions will be discussed, together with the nature of the time-charge correlation curve.Comment: 31 pages, 19 figures, submitted to JINS

Compressive Sensing of Signals Generated in Plastic Scintillators in a Novel J-PET Instrument

The J-PET scanner, which allows for single bed imaging of the whole human body, is currently under development at the Jagiellonian University. The dis- cussed detector offers improvement of the Time of Flight (TOF) resolution due to the use of fast plastic scintillators and dedicated electronics allowing for sam- pling in the voltage domain of signals with durations of few nanoseconds. In this paper we show that recovery of the whole signal, based on only a few samples, is possible. In order to do that, we incorporate the training signals into the Tikhonov regularization framework and we perform the Principal Component Analysis decomposition, which is well known for its compaction properties. The method yields a simple closed form analytical solution that does not require iter- ative processing. Moreover, from the Bayes theory the properties of regularized solution, especially its covariance matrix, may be easily derived. This is the key to introduce and prove the formula for calculations of the signal recovery error. In this paper we show that an average recovery error is approximately inversely proportional to the number of acquired samples

Application of the Compress Sensing Theory for Improvement of the TOF Resolution in a Novel J-PET Instrument

Nowadays, in Positron Emission Tomography (PET) systems, a Time of Flight information is used to improve the image reconstruction process. In Time of Flight PET (TOF-PET), fast detectors are able to measure the difference in the arrival time of the two gamma rays, with the precision enabling to shorten significantly a range along the line-of-response (LOR) where the annihilation occurred. In the new concept, called J-PET scanner, gamma rays are detected in plastic scintillators. In a single strip of J-PET system, time values are obtained by probing signals in the amplitude domain. Owing to Compress Sensing theory, information about the shape and amplitude of the signals is recovered. In this paper we demonstrate that based on the acquired signals parameters, a better signal normalization may be provided in order to improve the TOF resolution. The procedure was tested using large sample of data registered by a dedicated detection setup enabling sampling of signals with 50 ps intervals. Experimental setup provided irradiation of a chosen position in the plastic scintillator strip with annihilation gamma quanta

GDPR privacy policies in CLAUDETTE: Challenges of omission, context and multilingualism

The latest developments in natural language processing and machine learning have created new opportunities in legal text analysis. In particular, we look at the texts of online privacy policies after the implementation of the European General Data Protection Regulation (GDPR). We analyse 32 privacy policies to design a methodology for automated detection and assessment of compliance of these documents. Preliminary results confirm the pressing issues with current privacy policies and the beneficial use of this approach in empowering consumers in making more informed decisions. However, we also encountered several serious issues in the process. This paper introduces the challenges through concrete examples of context dependence, omission of information, and multilingualism