Investigation of Behavior of Cold-formed Steel Sheeting Systems in Fire Using Finite Element Modeling

A 3D Finite Element (FE) model of steel sheeting, which includes the screw connector and support plate, is created to investigate the behavior of both steel sheeting and connections at elevated temperatures. The created model considers the material nonlinearity, large deformation and contact behavior. The material damage model for sheeting steel is defined so that the FE model is analyzed through the elastic and plastic ranges up to failure. The FE model is used to predict the ultimate resistance and deformation. The current FE model captures the main behavior of steel roof systems well up to around 20 minutes according to the test results from the literatures. The comparisons to the FE model with connector elements created previously show that the lower stiffness of connections reduces both the mid-span displacement up to 15 min and the compressive forces developed at support because of the restrained thermal elongation, which benefits both steel roof sheeting and connections at support. However, the current model needs to be improved in order to have the same final failure mode as from the test results from literatures

Prediction of Joint Temperatures in Shot-nailed Cold-formed Steel Sheeting with Finite Element Modelling

This paper investigates the 3D temperature fields of the shot-nailed steel roof sheeting joints in fire using commercial Finite Element (FE) software ABAQUS when the connected members and connections are protected by either intumescent paint or rockwool panels. Numerical models and parameters used in the models are briefly introduced. When expanded in fire, both thickness and thermal conductivity are varied with increased temperatures. The simplified representation of intumescent paint is described. Parametric analyses are performed in order to investigate the sensitivity of the parameters of thermal contacts. When the joints are protected with rockwool panels, the approximate cavity radiation method in ABAQUS is used to take the cavity radiation into account among the surfaces of the profiled steel sheeting and fire protection panel. The 3D temperature fields in the proximity of shot-nail connections from above mentioned fire protection solutions are compared. The benefits of using various fire protection solutions are discussed

Methylenetetrahydrofolate reductase (MTHFR) C677T polymorphism and high plasma homocysteine in chronic hepatitis C (CHC) infected patients from the Northeast of Brazil

<p>Abstract</p> <p>Background/Aim</p> <p>Hyperhomocysteinemia due to Methylenetetrahydrofolate Reductase (<it>MTHFR</it>) gene, in particular the C677T (Ala222Val) polymorphism were recently associated to steatosis and fibrosis. We analyzed the frequency of <it>MTHFR </it>gene in a cross-sectional study of patients affected by Chronic Hepatitis C (CHC) from Northeast of Brazil.</p> <p>Method</p> <p>One hundred seven-four untreated patients with CHC were genotyped for the C677T <it>MTHFR</it>. Genomic DNA was extracted from peripheral blood cells and the C677T <it>MTHFR </it>polymorphism was identified by PCR-RFLP. The homocysteine (Hcy) levels were determined by chemiluminescence method. All patients were negative for markers of Wilson's disease, hemochromatosis and autoimmune diseases and have current and past daily alcohol intake less than 100 g/week.</p> <p>Results</p> <p>Among subjects infected with CHC genotype non-1 the frequency of <it>MTHFR </it>genotypes TT was 9.8% <it>versus </it>4.4% genotype 1 (p = 0.01). Nevertheless, association was found between the <it>MTHFR </it>genotype TT × CT/CC polymorphism and the degree of steatosis and fibrosis in both hepatitis C genotype (p < 0.05). A significant difference was found on plasma Hcy levels in patients with steatosis regardless of HCV genotype (p = 0.03).</p> <p>Conclusion</p> <p>Our results indicate that plasma Hcy levels is highly prevalent in subjects with chronic hepatits C with steatosis regardless of HCV genotype and vitamin deficiency. The presence of genotype TT of <it>MTHFR </it>C677T polymorphism was more common in CHC genotype non-1 infected patient regardless of histopathological classification and genotype TT+CT frequencies were significant in the presence of fibrosis grade 1+2 and of steatosis in CHC infected patients from the northeast of Brazil regardless of HCV genotype. The genetic susceptibility of <it>MTHFR </it>C677T polymorphism should be confirmed in a large population.</p

ER Stress-Inducible Factor CHOP Affects the Expression of Hepcidin by Modulating C/EBPalpha Activity

Endoplasmic reticulum (ER) stress induces a complex network of pathways collectively termed the unfolded protein response (UPR). The clarification of these pathways has linked the UPR to the regulation of several physiological processes. However, its crosstalk with cellular iron metabolism remains unclear, which prompted us to examine whether an UPR affects the expression of relevant iron-related genes. For that purpose, the HepG2 cell line was used as model and the UPR was activated by dithiothreitol (DTT) and homocysteine (Hcys). Here, we report that hepcidin, a liver secreted hormone that shepherds iron homeostasis, exhibits a biphasic pattern of expression following UPR activation: its levels decreased in an early stage and increased with the maintenance of the stress response. Furthermore, we show that immediately after stressing the ER, the stress-inducible transcription factor CHOP depletes C/EBPα protein pool, which may in turn impact on the activation of hepcidin transcription. In the later period of the UPR, CHOP levels decreased progressively, enhancing C/EBPα-binding to the hepcidin promoter. In addition, analysis of ferroportin and ferritin H revealed that the transcript levels of these iron-genes are increased by the UPR signaling pathways. Taken together, our findings suggest that the UPR can have a broad impact on the maintenance of cellular iron homeostasis

The Role of Indoleamine 2,3-Dioxygenase in LP-BPM5 Murine Retroviral Disease Progression

Indoleamine 2,3-dioxygenase (IDO) is an immunomodulatory intracellular enzyme involved in tryptophan degradation. IDO is induced during cancer and microbial infections by cytokines, ligation of co-stimulatory molecules and/or activation of pattern recognition receptors, ultimately leading to modulation of the immune response. LP-BM5 murine retroviral infection induces murine AIDS (MAIDS), which is characterized by profound and broad immunosuppression of T- and B-cell responses. Our lab has previously described multiple mechanisms regulating the development of immunodeficiency of LP-BM5-induced disease, including Programmed Death 1 (PD-1), IL-10, and T-regulatory (Treg) cells. Immunosuppressive roles of IDO have been demonstrated in other retroviral models, suggesting a possible role for IDO during LP-BM5-induced retroviral disease progression and/or development of viral load

Mechanical Properties of High and Very-High Strength Steel at Elevated Temperatures and After Cooling Down

High-strength steels (HSS) are produced using special chemical composition or/and manufacturing processes. Both aspects affect their mechanical properties at elevated temperatures and after cooling down, and particularly the residual strength and the ductility of the structural members. As HSS equates the design of lighter structural elements, higher temperatures are developed internally compared to the elements designed with conventional carbon steel. Therefore, the low thickness members, along with the severe effect of high temperature on the mechanical properties of the HSS, constitute to the increased vulnerability of such structures in fire. Moreover, the re-use and reinstatement of these structures are more challenging due to the lower residual mechanical properties of HSS after the cooling down period. This paper presents a review of the available experimental studies of the mechanical properties of HSS at elevated temperatures and after cooling down. The experimental results are collected and compared with the proposed material model (reduction factors) of EN1993–1-2. Based on these comparisons, modified equations describing the effect of elevated temperatures on the mechanical properties of HSS are proposed. Also, the post-fire mechanical properties of HSS are examined. A comprehensive discussion on the effect of influencing parameters, such as manufacturing process, microstructure, loading conditions, maximum temperature, and others is further explored

Pentraxin 3 (PTX3) Is Associated with Severe Sepsis and Fatal Disease in Emergency Room Patients with Suspected Infection: A Prospective Cohort Study

Background Early diagnostic and prognostic stratification of patients with suspected infection is a difficult clinical challenge. We studied plasma pentraxin 3 (PTX3) upon admission to the emergency department in patients with suspected infection. Methods The study comprised 537 emergency room patients with suspected infection: 59 with no systemic inflammatory response syndrome (SIRS) and without bacterial infection (group 1), 67 with bacterial infection without SIRS (group 2), 54 with SIRS without bacterial infection (group 3), 308 with sepsis (SIRS and bacterial infection) without organ failure (group 4) and 49 with severe sepsis (group 5). Plasma PTX3 was measured on admission using a commercial solid-phase enzyme-linked immunosorbent assay (ELISA). Results The median PTX3 levels in groups 1–5 were 2.6 ng/ml, 4.4 ng/ml, 5.0 ng/ml, 6.1 ng/ml and 16.7 ng/ml, respectively (p<0.001). The median PTX3 concentration was higher in severe sepsis patients compared to others (16.7 vs. 4.9 ng/ml, p<0.001) and in non-survivors (day 28 case fatality) compared to survivors (14.1 vs. 5.1 ng/ml, p<0.001). A high PTX3 level predicted the need for ICU stay (p<0.001) and hypotension (p<0.001). AUCROC in the prediction of severe sepsis was 0.73 (95% CI 0.66–0.81, p<0.001) and 0.69 in case fatality (95% CI 0.58–0.79, p<0.001). PTX3 at a cut-off level for 14.1 ng/ml (optimal cut-off value for severe sepsis) showed 63% sensitivity and 80% specificity. At a cut-off level 7.7 ng/ml (optimal cut-off value for case fatality) showed 70% sensitivity and 63% specificity in predicting case fatality on day 28.In multivariate models, high PTX3 remained an independent predictor of severe sepsis and case fatality after adjusting for potential confounders. Conclusions A high PTX3 level on hospital admission predicts severe sepsis and case fatality in patients with suspected infection.Public Library of Science open acces