110 research outputs found

    Converting a C-130 Hercules into a Compound Helicopter: A Conceptual Design Study

    Get PDF
    This study presents the performance and weight changes for a Compound C-130 as compared to the Baseline C-130H Hercules, using NDARC as the primary analysis tool. First, the C-130H was modeled within NDARC, from which performance at various conditions and a parametric weight statement were generated. Then, the C-130H NDARC file was modified to represent the Compound C-130, which was then put through the same performance analysis as the C-130H. A parametric weight statement was also calculated for the Compound C-130, which allowed for comparison to the C-130H. As part of the modeling of the Compound C-130, a Rotor Design Spreadsheet was created that would allow the direct calculation of the weight of the main rotors being added. Using composite materials led to considerable weight savings for both the rotor system and the hub weights. These weight savings are reflected in the NDARC Technology Factors which were determined to be 0.71 and 0.5 for the rotor blades and the hub/hinge system, respectively. Such Technology Factors suggest that using composites for other components could drastically lighten the Operating Empty Weight of the aircraft. The weight statements show the weights for each of the components on each aircraft. It is quite evident that the Compound C-130 has a higher Operating Empty Weight due to the addition of the two main rotors and a drive system to connect each engine group on the wing tips. Upon further analysis, the main weight driver is the drive system. While the main rotor/hub/hinge weight increase is to be expected, the weight increase due to the transmission drive and gear boxes are cause for concern. Unless a method can be found of reducing the weight of the drive system, the weight penalty makes the Compound a C-130 an inefficient aircraft in terms of payload/fuel capacity. Possible solutions are either off-loading some of the power requirements through the drive system or using composite materials in the construction of the drive system. The performance of the Compound C-130 versus the C-130H shows a clear need for more powerful engines than are currently present on the C-130H. This would also adversely affect the Operating Empty Weight since a larger power plant requires more weight. However, one advantage that the Compound C-130 presents is the ability to hover and operate at low speeds in Helicopter Mode. While the C-130H is unable to travel at speeds lower than its stall speed, the Compound C-130 is able to hover using the main rotors. Thus, the Compound C-130 is able to operate independent of runways, let alone the condition of the nearest runway. Ultimately, the Compound C-130 is an effective aircraft in theaters requiring VTOL aircraft due to geographical considerations in terms or performance. Unfortunately, the weight penalty associated with converting the C-130H to a Compound C-130 suggests that further work in the area of the drive systems is required

    Hydrogel-CNT Biomimetic Cilia for Flow Sensing

    Get PDF

    Population structure and diversity in Valencia peanut germplasm collection

    Get PDF
    Valencia peanuts [Arachis hypogaea L. subsp. fastigiata Waldron var. fastigiata (Waldron) Krapov. & W. C. Greg.] are well known for their in-shell market value. Assessment of genetic diversity is key to the success of developing improved cultivars with desirable agronomic and quality traits. Seventy-eight U.S. Valencia core collection accessions together with 36 Valencia accessions representing the global peanut mini-core collection were used to study population structure and diversity and to identify genetically diverse Valencia germplasm for use in peanut breeding. Fifty-two simple sequence repeats loci amplifi ed 683 alleles, with an average of 13 alleles per locus. The mean polymorphism information content and gene diversity, respectively, were 0.270 and 0.335. The pairwise genetic distance ranged from 0.143 to 0.474, with an average of 0.631. Neighbor-joining clustering, principal coordinate analysis, and STRUCTURE analysis consistently separated the Valencia germplasm into fi ve clusters with two distinct major groups. The fi rst major group consisted of genotypes from South America (64%) with few accessions from Africa, North America, Caribbean, and European regions. The second group consisted of accessions mostly from diverse regions of Africa, North and South America, Asia, and the Caribbean. However, the structuring was not related to the geographic origin and several admixtures were observed. The information generated in this study and phenotyping of this material for biotic and abiotic stress responses and yield-quality traits will facilitate selection of trait-specifi c, genetically diverse parents for developing Valencia peanut cultivars with a broad genetic base

    From Biological Cilia to Artificial Flow Sensors: Biomimetic Soft Polymer Nanosensors with High Sensing Performance

    Get PDF
    We report the development of a new class of miniature all-polymer flow sensors that closely mimic the intricate morphology of the mechanosensory ciliary bundles in biological hair cells. An artificial ciliary bundle is achieved by fabricating bundled polydimethylsiloxane (PDMS) micro-pillars with graded heights and electrospinning polyvinylidenefluoride (PVDF) piezoelectric nanofiber tip links. The piezoelectric nature of a single nanofiber tip link is confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Rheology and nanoindentation experiments are used to ensure that the viscous properties of the hyaluronic acid (HA)-based hydrogel are close to the biological cupula. A dome-shaped HA hydrogel cupula that encapsulates the artificial hair cell bundle is formed through precision drop-casting and swelling processes. Fluid drag force actuates the hydrogel cupula and deflects the micro-pillar bundle, stretching the nanofibers and generating electric charges. Functioning with principles analogous to the hair bundles, the sensors achieve a sensitivity and threshold detection limit of 300 mV/(m/s) and 8 μm/s, respectively. These self-powered, sensitive, flexible, biocompatibale and miniaturized sensors can find extensive applications in navigation and maneuvering of underwater robots, artificial hearing systems, biomedical and microfluidic devices.Singapore. National Research Foundation (Singapore-MIT Alliance for Research and Technology)Singapore-MIT Alliance for Research and Technology (SMART) (Innovation Grants ING148079- ENG

    Mapping and validation of QTLs for resistance to an Indian isolate of Ascochyta blight pathogen in chickpea

    Get PDF
    Ascochyta blight (AB) caused by Ascochyta rabiei, is globally the most important foliar disease that limits the productivity of chickpea (Cicer arietinum L.). An intraspecific linkage map of cultivated chickpea was constructed using an F2 population derived from a cross between an AB susceptible parent ICC 4991 (Pb 7) and an AB resistant parent ICCV 04516. The resultant map consisted of 82 simple sequence repeat (SSR) markers and 2 expressed sequence tag (EST) markers covering 10 linkage groups, spanning a distance of 724.4 cM with an average marker density of 1 marker per 8.6 cM. Three quantitative trait loci (QTLs) were identified that contributed to resistance to an Indian isolate of AB, based on the seedling and adult plant reaction. QTL1 was mapped to LG3 linked to marker TR58 and explained 18.6% of the phenotypic variance (R2) for AB resistance at the adult plant stage. QTL2 and QTL3 were both mapped to LG4 close to four SSR markers and accounted for 7.7% and 9.3%, respectively, of the total phenotypic variance for AB resistance at seedling stage. The SSR markers which flanked the AB QTLs were validated in a half-sib population derived from the same resistant parent ICCV 04516. Markers TA146 and TR20, linked to QTL2 were shown to be significantly associated with AB resistance at the seedling stage in this half-sib population. The markers linked to these QTLs can be utilized in marker-assisted breeding for AB resistance in chickpea

    Genetic enhancement of Valencia core collection and molecular characterization of U.S. peanut mini core collection using SSR markers

    Get PDF
    A core collection is a gateway for the utilization of diverse accessions with beneficial traits in applied breeding programs. 630 USDA Valencia peanut germplasm and a control cultivar (New Mexico Valencia C) were evaluated for 26 descriptors in augmented design for two seasons. The accessions were stratified by country of origin, and data on morphological and agronomic descriptors were used for clustering following Ward’s method. About 10% or a minimum of one accession from each cluster and region was selected to develop core subset of 77 accessions. The similarity in correlation coefficients in entire collection and core subset suggest that this core subset has preserved most of the co-adapted gene complexes controlling these associations. The peanut breeders engaged in improving the genetic potential of Valencia peanuts will find this core subset useful in cultivar development

    Candidate Genes Detected in Transcriptome Studies Are Strongly Dependent on Genetic Background

    Get PDF
    Whole genome transcriptomic studies can point to potential candidate genes for organismal traits. However, the importance of potential candidates is rarely followed up through functional studies and/or by comparing results across independent studies. We have analysed the overlap of candidate genes identified from studies of gene expression in Drosophila melanogaster using similar technical platforms. We found little overlap across studies between putative candidate genes for the same traits in the same sex. Instead there was a high degree of overlap between different traits and sexes within the same genetic backgrounds. Putative candidates found using transcriptomics therefore appear very sensitive to genetic background and this can mask or override effects of treatments. The functional importance of putative candidate genes emerging from transcriptome studies needs to be validated through additional experiments and in future studies we suggest a focus on the genes, networks and pathways affecting traits in a consistent manner across backgrounds

    The GCP molecular marker toolkit, an instrument for use in breeding food security crops

    Get PDF
    Crop genetic resources carry variation useful for overcoming the challenges of modern agriculture. Molecular markers can facilitate the selection of agronomically important traits. The pervasiveness of genomics research has led to an overwhelming number of publications and databases, which are, nevertheless, scattered and hence often difficult for plant breeders to access, particularly those in developing countries. This situation separates them from developed countries, which have better endowed programs for developing varieties. To close this growing knowledge gap, we conducted an intensive literature review and consulted with more than 150 crop experts on the use of molecular markers in the breeding program of 19 food security crops. The result was a list of effectively used and highly reproducible sequence tagged site (STS), simple sequence repeat (SSR), single nucleotide polymorphism (SNP), and sequence characterized amplified region (SCAR) markers. However, only 12 food crops had molecular markers suitable for improvement. That is, marker-assisted selection is not yet used for Musa spp., coconut, lentils, millets, pigeonpea, sweet potato, and yam. For the other 12 crops, 214 molecular markers were found to be effectively used in association with 74 different traits. Results were compiled as the GCP Molecular Marker Toolkit, a free online tool that aims to promote the adoption of molecular approaches in breeding activities

    Fine mapping of qSTV11KAS, a major QTL for rice stripe disease resistance

    Get PDF
    Rice stripe disease, caused by rice stripe virus (RSV), is one of the most serious diseases in temperate rice-growing areas. In the present study, we performed quantitative trait locus (QTL) analysis for RSV resistance using 98 backcross inbred lines derived from the cross between the highly resistant variety, Kasalath, and the highly susceptible variety, Nipponbare. Under artificial inoculation in the greenhouse, two QTLs for RSV resistance, designated qSTV7 and qSTV11KAS, were detected on chromosomes 7 and 11 respectively, whereas only one QTL was detected in the same location of chromosome 11 under natural inoculation in the field. The stability of qSTV11KAS was validated using 39 established chromosome segment substitution lines. Fine mapping of qSTV11KAS was carried out using 372 BC3F2:3 recombinants and 399 BC3F3:4 lines selected from 7,018 BC3F2 plants of the cross SL-234/Koshihikari. The qSTV11KAS was localized to a 39.2 kb region containing seven annotated genes. The most likely candidate gene, LOC_Os11g30910, is predicted to encode a sulfotransferase domain-containing protein. The predicted protein encoded by the Kasalath allele differs from Nipponbare by a single amino acid substitution and the deletion of two amino acids within the sulfotransferase domain. Marker-resistance association analysis revealed that the markers L104-155 bp and R48-194 bp were highly correlated with RSV resistance in the 148 landrace varieties. These results provide a basis for the cloning of qSTV11KAS, and the markers may be used for molecular breeding of RSV resistant rice varieties

    Reference genes for quantitative reverse transcription-polymerase chain reaction expression studies in wild and cultivated peanut

    Get PDF
    <p>Abstract</p> <p>Background</p> <p>Wild peanut species (<it>Arachis </it>spp.) are a rich source of new alleles for peanut improvement. Plant transcriptome analysis under specific experimental conditions helps the understanding of cellular processes related, for instance, to development, stress response, and crop yield. The validation of these studies has been generally accomplished by quantitative reverse transcription-polymerase chain reaction (qRT-PCR) which requires normalization of mRNA levels among samples. This can be achieved by comparing the expression ratio between a gene of interest and a reference gene which is constitutively expressed. Nowadays there is a lack of appropriate reference genes for both wild and cultivated <it>Arachis</it>. The identification of such genes would allow a consistent analysis of qRT-PCR data and speed up candidate gene validation in peanut.</p> <p>Results</p> <p>A set of ten reference genes were analyzed in four <it>Arachis </it>species (<it>A. magna</it>; <it>A. duranensis</it>; <it>A. stenosperma </it>and <it>A. hypogaea</it>) subjected to biotic (root-knot nematode and leaf spot fungus) and abiotic (drought) stresses, in two distinct plant organs (roots and leaves). By the use of three programs (GeNorm, NormFinder and BestKeeper) and taking into account the entire dataset, five of these ten genes, <it>ACT1 </it>(actin depolymerizing factor-like protein), <it>UBI1 </it>(polyubiquitin), <it>GAPDH </it>(glyceraldehyde-3-phosphate dehydrogenase), <it>60S </it>(60S ribosomal protein L10) and <it>UBI2 </it>(ubiquitin/ribosomal protein S27a) emerged as top reference genes, with their stability varying in eight subsets. The former three genes were the most stable across all species, organs and treatments studied.</p> <p>Conclusions</p> <p>This first in-depth study of reference genes validation in wild <it>Arachis </it>species will allow the use of specific combinations of secure and stable reference genes in qRT-PCR assays. The use of these appropriate references characterized here should improve the accuracy and reliability of gene expression analysis in both wild and cultivated Arachis and contribute for the better understanding of gene expression in, for instance, stress tolerance/resistance mechanisms in plants.</p
    corecore