Fatigue crack propagation of nickel-base superalloys at 650 deg C

The 650 C fatigue crack propagation behavior of two nickel-base superalloys, Rene 95 and Waspaloy, is studied with particular emphasis placed on understanding the roles of creep, environment, and two key grain boundary alloying additions, boron and zirconium. Comparison of air and vacuum data shows the air environment to be detrimental over a wide range of frequencies for both alloys. More in-depth analysis on Rene 95 shows at lower frequencies, such as 0.02 Hz, failure in air occurs by intergranular, environmentally-assisted creep crack growth, while at higher frequencies, up to 5.0 Hz, environmental interactions are still evident but creep effects are minimized. The effect of B and Zr in Waspaloy is found to be important where environmental and/or creep interactions are presented. In those instances, removal of B and Zr dramatically increases crack growth and it is therefore plausible that effective dilution of these elements may explain a previously observed trend in which crack growth rates increase with decreasing grain size

Isothermal and bithermal thermomechanical fatigue behavior of a NiCoCrAlY-coated single crystal superalloy

Specimens of single crystal PWA 1480 with group of zone axes (100) orientation, bare, or with NiCoCrAlY coating PWA 276, were tested in low cycle fatigue (LCF) at 650, 870, and 1050 C, and in simplified bithermal thermomechanical fatigue (TMF) tests between these temperatures. These tests were examined as a bridge between isothermal LCF and general TMF. In the bithermal test, an inelastic strain is applied at one temperature, T sub max, and reversed at T sub min. The out-of-phase (OP) test type imposing tension at T sub min and compression at T sub max received most study, since it was more damaging than the in-phase type. Specifically investigated were the effects of: inelastic strain range, the coating, delta T, T sub max, T sub min, and the environment

Orientation and temperature dependence of some mechanical properties of the single-crystal nickel-base superalloy Rene N4. 3: Tension-compression anisotropy

Single crystal superalloy specimens with various crystallographic directions along their axes were tested in compression at room temperature, 650, 760, 870, and 980 deg C. These results are compared with the tensile behavior studied previously. The alloy, Rene N4, was developed for gas turbine engine blades and has the nominal composition 3.7 Al, 4.2 Ti, 4 Ta, 0.5 Nb, 6 W, 1.5 Mo 9 Cr. 7.5 Co, balance Ni, in weight percent. Slip trace analysis showed that primary cube slip occurred even at room temperature for the 111 specimens. With increasing test temperature more orientations exhibited primary cube slip, until at 870 deg C only the 100 and 011 specimens exhibited normal octahedral slip. The yield strength for octahedral slip was numerically analysed using a model proposed by Lall, Chin, and Pope to explain deviations from Schmid's Law in the yielding behavior of a single phase Gamma prime alloy, Ni3(Al, Nb). The Schmid's Law deviations in Rene N4 were found to be largely due to a tension-compression anisotropy. A second effect, which increases trength for orientations away from 001, was found to be small in Rene N4. Analysis of recently published data on the single crystal superalloy PWA 1480 yielded the same result

Slowly cycling Rho kinase-dependent actomyosin cross-bridge slippage explains intrinsic high compliance of detrusor smooth muscle

Biological soft tissues are viscoelastic because they display timeindependent pseudoelasticity and time-dependent viscosity. However, there is evidence that the bladder may also display plasticity, defined as an increase in strain that is unrecoverable unless work is done by the muscle. In the present study, an electronic lever was used to induce controlled changes in stress and strain to determine whether rabbit detrusor smooth muscle (rDSM) is best described as viscoelastic or viscoelastic plastic. Using sequential ramp loading and unloading cycles, stress-strain and stiffness-stress analyses revealed that rDSM displayed reversible viscoelasticity, and that the viscous component was responsible for establishing a high stiffness at low stresses that increased only modestly with increasing stress compared with the large increase produced when the viscosity was absent and only pseudoelasticity governed tissue behavior. The study also revealed that rDSM underwent softening correlating with plastic deformation and creep that was reversed slowly when tissues were incubated in a Ca2+ -containing solution. Together, the data support a model of DSM as a viscoelastic-plastic material, with the plasticity resulting from motor protein activation. This model explains the mechanism of intrinsic bladder compliance as slipping cross bridges, predicts that wall tension is dependent not only on vesicle pressure and radius but also on actomyosin cross-bridge activity, and identifies a novel molecular target for compliance regulation, both physiologically and therapeutically

Scientific questions for the exploration of the terrestrial planets and Jupiter - Advanced planetary missions technology program Progress report

Scientific questions and experimental design for planetary exploration of Jupiter, Mars, Mercury, and Venu

More than a Drop in the Bucket: The Social and Economic Costs of Dropouts and Grade Retentions Associated With Exclusionary Discipline

Each year many students are subject to exclusionary discipline, in fact, 60% of students in Texas are disciplined at-least once between grades 7 through 12. The purpose of this study is to examine the impact of school discipline contact on students’ risk for grade retention and school dropout using a statewide sample of nearly one million 7th grade students tracked through their 12th grade year. Results indicate that school discipline relates to a 24% increase in high school dropout. These additional dropouts are associated with an economic effect of between $750 million and$1.35 billion per year. Results also indicate that school discipline is associated with approximately 6,600 grade retentions per year in the state of Texas. The delayed workforce entry related to grade retention has an effect of over $100 million for the state, including$5.7 million in lost tax revenue. Given the higher discipline rate for minorities, these costs disproportionately affect them. Further, the additional year of instruction costs the state over $76 million dollars

On religion and cultural policy: notes on the Roman Catholic Church

This paper argues that religious institutions have largely been neglected within the study of cultural policy. This is attributed to the inherently secular tendency of most modern social sciences. Despite the predominance of the ‘secularisation paradigm’, the paper notes that religion continues to promote powerful attachments and denunciations. Arguments between the ‘new atheists’, in particular, Richard Dawkins, and their opponents are discussed, as is Habermas’s conciliatory encounter with Joseph Ratzinger (later Pope Benedict XVI). The paper then moves to a consideration of the Roman Catholic Church as an agent of cultural policy, whose overriding aim is the promotion of ‘Christian consciousness’. Discussion focuses on the contested meanings of this, with reference to (1) the deliberations of Vatican II and (2) the exercise of theological and cultural authority by the Pope and the Congregation for the Doctrine of the Faith (CDF). It is argued that these doctrinal disputes intersect with secular notions of social and cultural policy and warrant attention outside the specialist realm of theological discourse

A new model to determine the dispersion of fatigue damage evaluations

Reliable predictions of remaining lives of civil or mechanical structures subjected to fatigue damage are very difficult to be made. In general, fatigue damage is extremely sensitive to the random variations of material mechanical properties, environment and loading. These variations may induce large dispersions when the structural fatigue life has to be predicted. Wirsching (1970) mentions dispersions of the order of 30 to 70 % of the mean calculated life. The presented paper introduces a model to estimate the fatigue damage dispersion based on known statistical distributions of the fatigue parameters (material properties and loading). The model is developed by expanding into Taylor series the set of equations that describe fatigue damage for crack initiation

Analysis of the Macaca mulatta transcriptome and the sequence divergence between Macaca and human

We report the initial sequencing and comparative analysis of the Macaca mulatta transcriptome. Cloned sequences from 11 tissues, nine animals, and three species (M. mulatta, M. fascicularis, and M. nemestrina) were sampled, resulting in the generation of 48,642 sequence reads. These data represent an initial sampling of the putative rhesus orthologs for 6,216 human genes. Mean nucleotide diversity within M. mulatta and sequence divergence among M. fascicularis, M. nemestrina, and M. mulatta are also reported