44 research outputs found
Recommended from our members
Stable Hexylphosphonate-Capped Blue-Emitting Quantum-Confined CsPbBr3 Nanoplatelets.
Quantum-confined CsPbBr3 nanoplatelets (NPLs) are extremely promising for use in low-cost blue light-emitting diodes, but their tendency to coalesce in both solution and film form, particularly under operating device conditions with injected charge-carriers, is hindering their adoption. We show that employing a short hexyl-phosphonate ligand (C6H15O3P) in a heat-up colloidal approach for pure, blue-emitting quantum-confined CsPbBr3 NPLs significantly suppresses these coalescence phenomena compared to particles capped with the typical oleyammonium ligands. The phosphonate-passivated NPL thin films exhibit photoluminescence quantum yields of ∼40% at 450 nm with exceptional ambient and thermal stability. The color purity is preserved even under continuous photoexcitation of carriers equivalent to LED current densities of ∼3.5 A/cm2. 13C, 133Cs, and 31P solid-state MAS NMR reveal the presence of phosphonate on the surface. Density functional theory calculations suggest that the enhanced stability is due to the stronger binding affinity of the phosphonate ligand compared to the ammonium ligand.J. S. and S.D.S. acknowledge the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (HYPERION, grant agreement number 756962). S.D.S acknowledges funding from the Royal Society and Tata Group (UF150033). R.H.F. and Y.L. acknowledge sup-port from the Simons Foundation (grant 601946). M.A. and D.K. acknowledges funding from the European Union’s Hori-zon 2020 research and innovation programme under the Ma-rie Skłodowska-Curie (grant agreement number 841386 and 841136, respectively). K.J. acknowledges funding from the Royal Society (RGFR1180002). K.F. acknowledges a George and Lilian Schiff Studentship, Winton Studentship, the Engineer-ing and Physical Sciences Research Council (EPSRC) student-ship, Cambridge Trust Scholarship, and Robert Gardiner Scholarship. C. P. G. acknowledges the European Research Council (ERC) under the European Union’s Horizon 2020 re-search and innovation program (835073) and the Royal Society for a Research Professorship (RP\R1\180147). The authors acknowledge the EPSRC for funding (EP/R023980/1)
Influence of Grain Size on Phase Transitions in Halide Perovskite Films
Grain size in polycrystalline halide perovskite films is known to have an impact on the optoelectronic properties of the films, but its influence on their soft structural properties and phase transitions is unclear. Here, we use temperature-dependent X-ray diffraction, absorption, and macro- and micro-photoluminescence measurements to investigate the tetragonal to orthorhombic phase transition in thin methylammonium lead iodide films with grain sizes ranging from the micron scale down to the tens of nanometre scale. We show that the phase transition nominally at ~150 K is increasingly suppressed with decreasing grain size and, in the smallest grains, we only see the first evidence of a phase transition at temperatures as low as ~80 K. With decreasing grain size, we also see an increasing magnitude of the hysteresis in the structural and optoelectronic properties when cooling to, and then upon heating from, 100K. Our work reveals the remarkable sensitivity of the optoelectronic, physical and phase properties to the local environment of the perovskite structure, which will have large ramifications for phase and defect engineering in operating devices.EPSRC NanoDTC
Royal Society
ERC Starting Gran
Extinction of ants' feeding and social foraging on myrmecochorous seeds
BACKGROUND/AIMS: Fibrocaps is a dry powder fibrin sealant containing human plasma-derived fibrinogen and thrombin. The safety, efficacy, and application methods for Fibrocaps were evaluated in an exploratory, first-in-human, noncomparative, clinical study. METHODS: Patients with minor bleeding/oozing after elective partial hepatic resection had Fibrocaps applied to the bleeding site either directly from the vial or from a spray device, with manual pressure applied using a cellulose, collagen, or gelatin sponge, if needed. Safety was evaluated at screening and postoperative days 1, 2, and 5, and weeks 4 and 12. The formation of anti-thrombin antibodies was assessed at baseline, and after 4 and 12 weeks. Time to hemostasis (TTH) within 10 min was determined. RESULTS: Twenty-nine patients were treated with Fibrocaps; 6 experienced serious adverse events that were not related to the course of treatment. Adverse events occurring in >10% of patients were nausea, constipation, hypotension, obstipation, hypokalemia, and postoperative pain. Most adverse events were mild or moderate in severity. No patient developed anti-thrombin antibodies. The percentage of patients who achieved hemostasis was 93%; the median TTH was 3.8 min (range 0.3-10.3). Manual pressure was applied with Fibrocaps in 19 patients and considered beneficial in most. CONCLUSION: Fibrocaps was well tolerated in patients undergoing elective hepatic resection and resulted in rapid hemostasis. These safety and efficacy results support further clinical testing of this ready-to-use fibrin sealant as an adjunct to surgical hemostasis. (c) 2015 S. Karger AG, Basel
Imaging Light-Induced Migration of Dislocations in Halide Perovskites with 3d Nanoscale Strain Mapping
In recent years, halide perovskite materials have been used to make high-performance solar cells and light-emitting devices. However, material defects still limit device performance and stability. Here, synchrotron-based Bragg coherent diffraction imaging is used to visualize nanoscale strain fields, such as those local to defects, in halide perovskite microcrystals. Significant strain heterogeneity within MAPbBr3 (MA = CH3NH3+) crystals is found in spite of their high optoelectronic quality, and both 〈100〉 and 〈110〉 edge dislocations are identified through analysis of their local strain fields. By imaging these defects and strain fields in situ under continuous illumination, dramatic light-induced dislocation migration across hundreds of nanometers is uncovered. Further, by selectively studying crystals that are damaged by the X-ray beam, large dislocation densities and increased nanoscale strains are correlated with material degradation and substantially altered optoelectronic properties assessed using photoluminescence microscopy measurements. These results demonstrate the dynamic nature of extended defects and strain in halide perovskites, which will have important consequences for device performance and operational stability
Photodoping through local charge carrier accumulation in alloyed hybrid perovskites for highly efficient luminescence
Metal halide perovskites have emerged as exceptional semiconductors for optoelectronic applications. Substitution of the monovalent cations has advanced luminescence yields and device efficiencies. Here, we control the cation alloying to enhance optoelectronic performance through alteration of the charge carrier dynamics in mixed-halide perovskites. In contrast to single-halide perovskites, we find high luminescence yields for photoexcited carrier densities far below solar illumination conditions. Using time-resolved spectroscopy we show that the charge carrier recombination regime changes from second to first order within the first tens of nanoseconds after excitation. Supported by microscale mapping of the optical bandgap, electrically gated transport measurements and first-principles calculations, we demonstrate that spatially varying energetic disorder in the electronic states causes local charge accumulation, creating p- and n-type photodoped regions, which unearths a strategy for efficient light emission at low charge-injection in solar cells and light-emitting diodes
Imaging Light-Induced Migration of Dislocations in Halide Perovskites with 3D Nanoscale Strain Mapping
In recent years, halide perovskite materials have been used to make high
performance solar cell and light-emitting devices. However, material defects
still limit device performance and stability. Here, we use synchrotron-based
Bragg Coherent Diffraction Imaging to visualise nanoscale strain fields, such
as those local to defects, in halide perovskite microcrystals. We find
significant strain heterogeneity within MAPbBr (MA =
CHNH) crystals in spite of their high optoelectronic quality,
and identify both 100 and 110 edge
dislocations through analysis of their local strain fields. By imaging these
defects and strain fields in situ under continuous illumination, we uncover
dramatic light-induced dislocation migration across hundreds of nanometres.
Further, by selectively studying crystals that are damaged by the X-ray beam,
we correlate large dislocation densities and increased nanoscale strains with
material degradation and substantially altered optoelectronic properties
assessed using photoluminescence microscopy measurements. Our results
demonstrate the dynamic nature of extended defects and strain in halide
perovskites and their direct impact on device performance and operational
stability.Comment: Main text and Supplementary Information. Main text: 15 pages, 4
figures. Supplementary Information: 16 pages, 27 figures, 1 tabl
Stabilized tilted-octahedra halide perovskites inhibit local formation of performance-limiting phases.
Efforts to stabilize photoactive formamidinium (FA)–based halide perovskites for perovskite photovoltaics have focused on the growth of cubic formamidinium lead iodide (α-FAPbI3) phases by empirically alloying with cesium, methylammonium (MA) cations, or both. We show that such stabilized FA-rich perovskites are noncubic and exhibit ~2° octahedral tilting at room temperature. This tilting, resolvable only with the use of local nanostructure characterization techniques, imparts phase stability by frustrating transitions from photoactive to hexagonal phases. Although the bulk phase appears stable when examined macroscopically, heterogeneous cation distributions allow microscopically unstable regions to form; we found that these transitioned to hexagonal polytypes, leading to local trap-assisted performance losses and photoinstabilities. Using surface-bound ethylenediaminetetraacetic acid, we engineered an octahedral tilt into pure α-FAPbI3 thin films without any cation alloying. The templated photoactive FAPbI3 film was extremely stable against thermal, environmental, and light stressors
Assessing competency in Evidence Based Practice: strengths and limitations of current tools in practice
<p>Abstract</p> <p>Background</p> <p>Evidence Based Practice (EBP) involves making clinical decisions informed by the most relevant and valid evidence available. Competence can broadly be defined as a concept that incorporates a variety of domains including knowledge, skills and attitudes. Adopting an evidence-based approach to practice requires differing competencies across various domains including literature searching, critical appraisal and communication. This paper examines the current tools available to assess EBP competence and compares their applicability to existing assessment techniques used in medicine, nursing and health sciences.</p> <p>Discussion</p> <p>Only two validated assessment tools have been developed to specifically assess all aspects of EBP competence. Of the two tools (<it>Berlin </it>and <it>Fresno </it>tools), only the <it>Fresno </it>tool comprehensively assesses EBP competency across all relevant domains. However, both tools focus on assessing EBP competency in medical students; therefore neither can be used for assessing EBP competency across different health disciplines. The Objective Structured Clinical Exam (OSCE) has been demonstrated as a reliable and versatile tool to assess clinical competencies, practical and communication skills. The OSCE has scope as an alternate method for assessing EBP competency, since it combines assessment of cognitive skills including knowledge, reasoning and communication. However, further research is needed to develop the OSCE as a viable method for assessing EBP competency.</p> <p>Summary</p> <p>Demonstrating EBP competence is a complex task – therefore no single assessment method can adequately provide all of the necessary data to assess complete EBP competence. There is a need for further research to explore how EBP competence is best assessed; be it in written formats, such as the <it>Fresno </it>tool, or another format, such as the OSCE. Future tools must also incorporate measures of assessing how EBP competence affects clinician behaviour and attitudes as well as clinical outcomes in real-time situations. This research should also be conducted across a variety of health disciplines to best inform practice.</p
Modulation of erlotinib pharmacokinetics in mice by a novel cytochrome P450 3A4 inhibitor, BAS 100
Administration of BAS 100, a novel mechanism-based CYP3A4 inhibitor isolated from grapefruit juice, resulted in a 2.1-fold increase in erlotinib exposure following oral administration to wild-type and humanised CYP3A4 transgenic mice. This study illustrates the potential of BAS 100 to increase the low and variable oral bioavailability of erlotinib in cancer patients
Stabilized tilted-octahedra halide perovskites inhibit local formation of performance-limiting phases
Efforts to stabilize photoactive formamidinium (FA)–based halide perovskites for perovskite photovoltaics have focused on the growth of cubic formamidinium lead iodide (α-FAPbI3) phases by empirically alloying with cesium, methylammonium (MA) cations, or both. We show that such stabilized FA-rich perovskites are noncubic and exhibit ~2° octahedral tilting at room temperature. This tilting, resolvable only with the use of local nanostructure characterization techniques, imparts phase stability by frustrating transitions from photoactive to hexagonal phases. Although the bulk phase appears stable when examined macroscopically, heterogeneous cation distributions allow microscopically unstable regions to form; we found that these transitioned to hexagonal polytypes, leading to local trap-assisted performance losses and photoinstabilities. Using surface-bound ethylenediaminetetraacetic acid, we engineered an octahedral tilt into pure α-FAPbI3 thin films without any cation alloying. The templated photoactive FAPbI3 film was extremely stable against thermal, environmental, and light stressors