339 research outputs found
Aging of PLS-glass: Study of the alteration phenomena.
The wood ash-based glass (PLS, potash-lime-silica), employed for medieval cathedral windows in Northern Europe since 1000 A.D., is particularly sensitive to the alteration phenomena.
Three PLS medieval-like glass were produced with different K2O content and characterized by FT-IR and Raman spectroscopy. Aging experiments were carried out by sulfuric acid and water, checking, in this last case, the pH over time. The weight loss and the alteration layer thickness were measured and the interacting solutions were analyzed through AAS. Raman maps were recorded on the altered glass cross sections. Changes in the glass network structure were observed and the presence of neo-formation products was determined
Influence of environment on the corrosion of glass–metal connections
'Glass sensors' of the eighteenth century Backer glass and the sixteenth century enamel from Limoges have been chosen for a series of experiments. Combinations of these materials with different base materials such as copper and bronze has been investigated. To create surface changes on the 'glass sensor', a corrosion process was induced in a controlled environment. A variety of corrosive agents such as hydrochloric acid, sulfuric acid, water and formaldehyde were used. The sample immersed in the corrosive solution was exposed alternately to light and high temperature for a total of 38 weeks. During this period, macroscopic and microscopic observations were made and series of tests such as SEM/EDS and Raman spectroscopy were performed on the surface of the samples. ICP-MS methods were used to determine the change in the chemical composition of the solutions where the samples had corroded. The primary aim of this study was to identify the impact of a number of external corrosive variables such as temperature, humidity and local environment to identify the most damaging environments for glass–metal objects. The obtained results showed the chemical and physical phenomena acting on the surface of the glass, metal or in the place of their joints. Information obtained on this study was used to explain the influence of the environment on the surface of glass–metal materials. Results can be used in the design of conservation work as well as for sustainable conservation
The use of micro-XRD for the study of glaze color decorations
The compounds responsible for the colours and decorations in glass and glazed ceramics include:
colouring agents (transition metal ions), pigments (micro-and nano-precipitates of compounds
that either do not dissolve or recrystallize in the glassy matrix) and opacifiers (microcrystalline
compounds with high light scattering capability). Their composition, structure and range of
stability are highly dependent not only on the composition but also on the procedures followed to
obtain them. Chemical composition of the colorants and crystallites may be obtained by means of
SEM-EDX and WDX. Synchrotron Radiation micro-X-ray Diffraction has a small beam size
adequate (10 to 50 microns footprint size) to obtain the structural information of crystalline
compounds and high brilliance, optimal for determining the crystallites even when present in low
amounts. In addition, in glass decorations the crystallites often appear forming thin layers (from
10 to 100 micrometers thick) and they show a depth dependent composition and crystal structure.
Their nature and distribution across the glass/glazes decorations gives direct information on the
technology of production and stability and may be related to the color and appearance.
A selection of glass and glaze coloring agents and decorations are studied by means of SR-micro-
XRD and SEM-EDX including: manganese brown, antimony yellow, red copper lusters and cobalt
blue. The selection includes Medieval (Islamic, and Hispano Moresque) and renaissance tin
glazed ceramics from the 10th to the 17th century AD
Whistler instability driven by the sunward electron deficit in the solar wind
Context. Solar wind electrons play an important role in the energy balance of the solar wind acceleration by carrying energy into interplanetary space in the form of electron heat flux. The heat flux is stored in the complex electron velocity distribution functions (VDFs) shaped by expansion, Coulomb collisions, and field-particle interactions. Aims. We investigate how the suprathermal electron deficit in the anti-strahl direction, which was recently discovered in the near-Sun solar wind, drives a kinetic instability and creates whistler waves with wave vectors that are quasi-parallel to the direction of the background magnetic field. Methods. We combined high-cadence measurements of electron pitch-angle distribution functions and electromagnetic waves pro- vided by Solar Orbiter during its first orbit. Our case study is based on a burst-mode data interval from the Electrostatic Analyser System (SWA-EAS) at a distance of 112 RS (0.52 au) from the Sun, during which several whistler wave packets were detected by Solar Orbiter’s Radio and Plasma Waves (RPW) instrument. Results. The sunward deficit creates kinetic conditions under which the quasi-parallel whistler wave becomes unstable. We directly test our predictions for the existence of these waves through solar wind observations. We find whistler waves that are quasi-parallel and almost circularly polarised, propagating away from the Sun, coinciding with a pronounced sunward deficit in the electron VDF. The cyclotron-resonance condition is fulfilled for electrons moving in the direction opposite to the direction of wave propagation, with energies corresponding to those associated with the sunward deficit. Conclusions. We conclude that the sunward deficit acts as a source of quasi-parallel whistler waves in the solar wind. The quasilinear diffusion of the resonant electrons tends to fill the deficit, leading to a reduction in the total electron heat flux
Carbon Supported Polyaniline as Anode Catalyst: Pathway to Platinum-Free Fuel Cells
The effectiveness of carbon supported polyaniline as anode catalyst in a fuel
cell (FC) with direct formic acid electrooxidation is experimentally
demonstrated. A prototype FC with such a platinum-free composite anode
exhibited a maximum room-temperature specific power of about 5 mW/cm2Comment: 11 pages, 3 Postscript figures, atricle tex styl
A multi-technique approach, based on mobile/portable laser instruments, for the in situ pigment characterization of stone sculptures on the island of Crete dating from Venetian and Ottoman period
Investigation of an enameled glass mosque lamp: a 13th–14th-century Mamluk example or 19th-century European version?
Tightening slip knots in raw and degummed silk to increase toughness without losing strength
NMP is supported by the European Research Council (ERC StG Ideas 2011 BIHSNAM n. 279985 on “Bio-Inspired hierarchical super-nanomaterials”, ERC PoC 2013-1 REPLICA2 n. 619448 on “Large-area replication of biological anti-adhesive nanosurfaces”, ERC PoC 2013-2 KNOTOUGH n. 632277 on “Super-tough knotted fibres”), by the European Commission under the Graphene Flagship (WP10 “Nanocomposites”, n. 604391) and by the Provincia Autonoma di Trento (“Graphene Nanocomposites”, n. S116/2012-242637 and reg.delib. n. 2266)
The Tara Pacific expedition—A pan-ecosystemic approach of the “-omics” complexity of coral reef holobionts across the Pacific Ocean
Coral reefs are the most diverse habitats in the marine realm. Their productivity, structural complexity, and biodiversity critically depend on ecosystem services provided by corals that are threatened because of climate change effects—in particular, ocean warming and acidification. The coral holobiont is composed of the coral animal host, endosymbiotic dinoflagellates, associated viruses, bacteria, and other microeukaryotes. In particular, the mandatory photosymbiosis with microalgae of the family Symbiodiniaceae and its consequences on the evolution, physiology, and stress resilience of the coral holobiont have yet to be fully elucidated. The functioning of the holobiont as a whole is largely unknown, although bacteria and viruses are presumed to play roles in metabolic interactions, immunity, and stress tolerance. In the context of climate change and anthropogenic threats on coral reef ecosystems, the Tara Pacific project aims to provide a baseline of the “-omics” complexity of the coral holobiont and its ecosystem across the Pacific Ocean and for various oceanographically distinct defined areas. Inspired by the previous Tara Oceans expeditions, the Tara Pacific expedition (2016–2018) has applied a pan-ecosystemic approach on coral reefs throughout the Pacific Ocean, drawing an east–west transect from Panama to Papua New Guinea and a south–north transect from Australia to Japan, sampling corals throughout 32 island systems with local replicates. Tara Pacific has developed and applied state-of-the-art technologies in very-high-throughput genetic sequencing and molecular analysis to reveal the entire microbial and chemical diversity as well as functional traits associated with coral holobionts, together with various measures on environmental forcing. This ambitious project aims at revealing a massive amount of novel biodiversity, shedding light on the complex links between genomes, transcriptomes, metabolomes, organisms, and ecosystem functions in coral reefs and providing a reference of the biological state of modern coral reefs in the Anthropocene
Initial Steps of Thermal Decomposition of Dihydroxylammonium 5,5′-bistetrazole-1,1′-diolate Crystals from Quantum Mechanics
Dihydroxylammonium 5,5?-bistetrazole-1,1?-diolate (TKX-50) is a recently synthesized energetic material (EM) with most promising performance, including high energy content, high density, low sensitivity, and low toxicity. TKX-50 forms an ionic crystal in which the unit cell contains two bistetrazole dianions {c-((NO)N3C)-[c-(CN3(NO)], formal charge of ?2} and four hydroxylammonium (NH3OH)+ cations (formal charge of +1). We report here quantum mechanics (QM)-based reaction studies to determine the atomistic reaction mechanisms for the initial decompositions of this system. First we carried out molecular dynamics simulations on the periodic TKX-50 crystal using forces from density functional based tight binding calculations (DFTB-MD), which finds that the chemistry is initiated by proton transfer from the cation to the dianion. Continuous heating of this periodic system leads eventually to dissociation of the protonated or diprotonated bistetrazole to release N2 and N2O. To refine the mechanisms observed in the periodic DFTB-MD, we carried out finite cluster quantum mechanics studies (B3LYP) for the unimolecular decomposition of the bistetrazole. We find that for the bistetrazole dianion, the reaction barrier for release of N2 is 45.1 kcal/mol, while release of N2O is 72.2 kcal/mol. However, transferring one proton to the bistetrazole dianion decreases the reaction barriers to 37.2 kcal/mol for N2 release and 59.5 kcal/mol for N2O release. Thus, we predict that the initial decompositions in TKX-50 lead to N2 release, which in turn provides the energy to drive further decompositions. On the basis of this mechanism, we suggest changes to make the system less sensitive while retaining the large energy release. This may help improve the synthesis strategy of developing high nitrogen explosives with further improved performance
- …