Composition of lower urinary tract stones in canines in Mexico City

11th International symposium on urolithiasis, Nice, France, 2–5 September 2008 Urological Research (2008) 36:157–232. doi:10.1007/s00240-008-0145-5. http://www.springerlink.com/ content/x263655772684210/fulltext.pdf.Effective long-term management of urolithiasis depends on identification and manipulation of factors contributing to initial stone formation; identification of these factors depends on accurate identification of the mineral composition of the urolith involved. The purpose of this study was to determine the chemical composition of uroliths obtained from the low urinary tract of dogs in Mexico City. One hundred and five cases of urolithiasis were studied in which stones were surgically obtained from the low urinary tracts of dogs treated in different hospitals. The chemical composition of the uroliths was quantita- tively and qualitatively determined by stereoscopic microscopy, IR-spectroscopy, scanning electron micros- copy and X-ray microanalysis. Age of animals ranged from 4 months to 14 years, with a median of 5 years. Compo- sition and distribution of the uroliths were struvite 38.1%,calcium oxalate 26.7%, silica 13.3%, urate 7.6%, mixed 11.4%, compounds 1.9%, and cystine 1%. Most uroliths were found in pure breed dogs (75.2%); 23 different breeds were identified, and more than half of the submissions were from breeds of small size. In our study, the frequency of struvite, calcium oxalate, cystine, urates, mixed and com- pounds stones are in agreement with papers that report on dog populations in America and Europe, but a higher fre- quency of silica uroliths was observed in Mexico City dogs.This work has been partially supported by a project of Waltham Foundation in Mexico

Avaliação da resistência ao cisalhamento da união entre duas ligas a base de CoCr e uma cerâmica

INTRODUCTION: Based on the importance of the integrity of the metal/ceramic interface, the purpose of this work was to evaluate the shear bond strength of the metal-ceramic union of two Co-Cr alloys (Wirobond C, Bego; Remanium 2000, Dentaurum) combined with Omega 900 ceramic (Vita Zahnfabrik). MATERIAL and METHOD: Eleven cylindrical matrixes were made for each alloy, and the metallic portion was obtained with the lost wax casting technique with standardized waxing of 4mm of height and of 4mm of diameter. The ceramic was applied according to the manufacturer’s recommendations with the aid of a teflon matrix that allowed its dimension to be standardized in the same size as the metallic portion. The specimens were submitted to the shear bond test in an universal testing machine (EMIC), with the aid of a device developed for such intention, and constant speed of 0.5mm/min. RESULTS and CONCLUSIONS: The mean resistance was 48.387MPa for Wirobond C alloy, with standard deviation of 17.718, and 55.956MPa for Remanium 2000, with standard deviation of 17.198. No statistically significant difference was observed between the shear strength of the two metal-ceramic alloys. ______________________________________________________________________________________________________________ RESUMOINTRODUÇÃO: Baseados na importância da integridade da interface metal-cerâmica, este trabalho tem como objetivo avaliar a resistência ao cisalhamento da união metal-cerâmica de duas ligas de Co-Cr (Wirobond C, Bego; Remanium 2000, Dentaurum) combinadas com a cerâmica Omega 900 (Vita Zahnfabrik). MATERIAIS E MÉTODOS: Foram confeccionados 11 corpos-de-prova cilíndricos para cada liga utilizada, sendo que a porção metálica foi obtida por fundição pela técnica da cera perdida, através de enceramentos padronizados com 4mm de altura por 4mm de diâmetro. A aplicação da cerâmica foi realizada segundo recomendações do fabricante, com auxílio de uma matriz de teflon que permitia sua padronização com as mesmas dimensões da porção metálica. Os corpos-de-prova foram submetidos ao ensaio de resistência ao cisalhamento em máquina de ensaios universal (EMIC), com auxílio de dispositivo desenvolvido para tal propósito, sob velocidade constante de 0,5mm/ min. RESULTADOS E CONCLUSÕES: As médias de resistência obtidas foram 48,387 MPa para a liga Wirobond C, com desvio padrão de 17,718, e 55,956 MPa para a Remanium 2000, com desvio padrão de 17,198. Após análise de variância foi possível observar que não há diferença estatisticamente significante entre os valores de resistência ao cisalhamento das duas ligas metalocerâmicas