7,837 research outputs found
Control of elasticity in cast elastomeric shock/vibration isolators
Elasticity is determined by isolators physical dimensions and by type of elastomer used. Once elastomer is selected and cast between two concentric tubes of device, isolator elasticity will remain fixed. Isolators having same dimensions can be built to different elasticity requirements using same elastomer
Rotational joint assembly for the prosthetic leg
A rotational joint assembly for a prosthetic leg has been devised, which enables an artificial foot to rotate slightly when a person is walking, running or turning. The prosthetic leg includes upper and lower tubular members with the rotational joint assembly interposed between them. The assembly includes a restrainer mechanism which consists of a pivotably mounted paddle element. This device applies limiting force to control the rotation of the foot and also restores torque to return the foot back to its initial position
Biomass production and nitrogen dynamics in an integrated aquaculture/agriculture system
A combined aquaculture/agriculture system that brings together the three major components of a Controlled Ecological Life Support System (CELSS) - biomass production, biomass processing, and waste recycling - was developed to evaluate ecological processes and hardware requirements necessary to assess the feasibility of and define design criteria for integration into the Kennedy Space Center (KSC) Breadboard Project. The system consists of a 1 square meter plant growth area, a 500 liter fish culture tank, and computerized monitoring and control hardware. Nutrients in the hydrophonic solution were derived from fish metabolites and fish food leachate. In five months of continuous operation, 27.0 kg of lettuce tops, 39.9 kg of roots and biofilm, and 6.6 kg of fish (wet weights) were produced with 12.7 kg of fish food input. Based on dry weights, a biomass conversion index of 0.52 was achieved. A nitrogen budget was derived to determine partitioning of nitrogen within various compartments of the system. Accumulating nitrogen in the hypoponic solution indicated a need to enlarge the plant growth area, potentially increasing the biomass production and improving the biomass conversion index
Continuous hydroponic wheat production using a recirculating system
Continuous crop production, where plants of various ages are growing simultaneously in a single recirculating nutrient solution, is a possible alternative to batch production in a Controlled Ecological Life Support System. A study was conducted at John F. Kennedy Space Center where 8 trays (0.24 sq m per tray) of Triticum aestivum L. Yecora Rojo were grown simultaneously in a growth chamber at 23 C, 65 percent relative humidity, 1000 ppm CO2, continuous light, with a continuous flow, thin film nutrient delivery system. The same modified Hoagland nutrient solution was recirculated through the plant trays from an 80 L reservoir throughout the study. It was maintained by periodic addition of water and nutrients based on chemical analyses of the solution. The study was conducted for 216 days, during which 24 trays of wheat were consecutively planted (one every 9 days), 16 of which were grown to maturity and harvested. The remaining 8 trays were harvested on day 216. Grain yields averaged 520 g m(exp -2), and had an average edible biomass of 32 percent. Consecutive yields were unaffected by nutrient solution age. It was concluded that continual wheat production will work in this system over an extended period of time. Certain micronutrient deficiencies and toxicities posed problems and must be addressed in future continuous production systems
Prosthesis coupling
A coupling for use in an apparatus for connecting a prosthesis to the bone of a stump of an amputated limb is described which permits a bio-compatible carbon sleeve forming a part of the prosthesis connector to float so as to prevent disturbing the skin seal around the carbon sleeve. The coupling includes a flexible member interposed between a socket that is inserted within an intermedullary cavity of the bone and the sleeve. A lock pin is carried by the prosthesis and has a stem portion which is adapted to be coaxially disposed and slideably within the tubular female socket for securing the prosthesis to the stump. The skin around the percutaneous carbon sleeve is able to move as a result of the flexing coupling so as to reduce stresses caused by changes in the stump shape and/or movement between the bone and the flesh portion of the stump
Norm Optimal Iterative Learning Control with Application to Problems in Accelerator based Free Electron Lasers and Rehabilitation Robotics
This paper gives an overview of the theoretical basis of the norm optimal approach to iterative learning control followed by results that describe more recent work which has experimentally benchmarking the performance that can be achieved. The remainder of then paper then describes its actual application to a physical process and a very novel application in stroke rehabilitation
The dawn phenomenon in type 2 diabetes: How to assess it in clinical practice?
International audienceAIM : The study was aimed at determining whether the dawn phenomenon in type 2 diabetes (T2D) can be predicted and quantified using simple and easily accessible glucose determinations.METHODS : A total of 210 non-insulin-treated persons with T2D underwent continuous glucose monitoring (CGM). The dawn phenomenon was quantified as the absolute increment from the nocturnal glucose nadir to the pre-breakfast value (Δdawn, mg/dL). Pre-lunch (preL) and pre-dinner (preD) glucose, and their averaged values (preLD), were compared with the nocturnal nadir. These pre-meal values were subtracted from the pre-breakfast values. The differences obtained (Δpre-mealL, Δpre-meal D and Δpre-meal LD) were correlated with Δdawn values. The receiver operating characteristic (ROC) curve was used to select the optimal Δpre-meal value that best predicted a dawn phenomenon, set at a threshold of 20mg/dL.RESULTS : All pre-meal glucose levels and differences from pre-breakfast values (Δpre-meal) significantly correlated (P<0.0001) with the nocturnal nadir and Δdawn values, respectively. The strongest correlations were observed for the parameters averaged at preL and preD time points: r=0.83 for preLD and r=0.58 for Δpre-meal LD. ROC curve analysis indicated that the dawn phenomenon at a threshold of 20mg/dL can be significantly predicted by a Δpre-meal LD cut off value of 10mg/dL. The relationship between Δdawn (Y, mg/dL) and Δpre-meal LD (X, mg/dL) was Y=0.49 X+15.CONCLUSION : The self-monitoring of preprandial glucose values at the three main mealtimes can predict the presence/absence of the dawn phenomenon, and permits reliable assessment of its magnitude without requiring continuous overnight glucose monitoring
The X-ray afterglow of the Gamma-ray burst of May 8, 1997: spectral variability and possible evidence of an iron line
We report the possible detection (99.3% of statistical significance) of
redshifted Fe iron line emission in the X-ray afterglow of Gamma-ray burst
GRB970508 observed by BeppoSAX. Its energy is consistent with the redshift of
the putative host galaxy determined from optical spectroscopy. The line
disappeared about 1 day after the burst. We have also analyzed the spectral
variability during the outburst event that characterizes the X-ray afterglow of
this GRB. The spectrum gets harder during the flare, turning to steep when the
flux decreases. The variability, intensity and width of the line indicate that
the emitting region should have a mass approximately greater than 0.5 solar
masses (assuming the iron abundance similar to its solar value), a size of
about 3 times 10^15 cm, be distributed anisotropically, and be moving with
sub-relativistic speed. In contrast to the fairly clean environment expected in
the merging of two neutron stars, the observed line properties would imply that
the site of the burst is embedded in a large mass of material, consistent with
pre-explosion ejecta of a very massive star. This material could be related
with the outburst observed in the afterglow 1 day after the GRB and with the
spectral variations measured during this phase.Comment: To appear in The Astrophysical Journal Letters, AASTEX LateX, 2
PostScript figure
Selecting Instructional Interventions for Students with Mild Disabilities in Inclusive Classrooms
Limitations of Reliability for Long-Endurance Human Spaceflight
Long-endurance human spaceflight - such as missions to Mars or its moons - will present a never-before-seen maintenance logistics challenge. Crews will be in space for longer and be farther way from Earth than ever before. Resupply and abort options will be heavily constrained, and will have timescales much longer than current and past experience. Spare parts and/or redundant systems will have to be included to reduce risk. However, the high cost of transportation means that this risk reduction must be achieved while also minimizing mass. The concept of increasing system and component reliability is commonly discussed as a means to reduce risk and mass by reducing the probability that components will fail during a mission. While increased reliability can reduce maintenance logistics mass requirements, the rate of mass reduction decreases over time. In addition, reliability growth requires increased test time and cost. This paper assesses trends in test time requirements, cost, and maintenance logistics mass savings as a function of increase in Mean Time Between Failures (MTBF) for some or all of the components in a system. In general, reliability growth results in superlinear growth in test time requirements, exponential growth in cost, and sublinear benefits (in terms of logistics mass saved). These trends indicate that it is unlikely that reliability growth alone will be a cost-effective approach to maintenance logistics mass reduction and risk mitigation for long-endurance missions. This paper discusses these trends as well as other options to reduce logistics mass such as direct reduction of part mass, commonality, or In-Space Manufacturing (ISM). Overall, it is likely that some combination of all available options - including reliability growth - will be required to reduce mass and mitigate risk for future deep space missions
- …