DNA Based Electrolyte/Separator for Lithium Battery Application

In this study, we demonstrated the use of DNA-CTMA (DC) in combination with PolyVinylidene Fluoride (PVDF) as a host matrix or separator for Lithium based electrolyte to form solid polymer/gel like electrolyte for potential application in Li-ion batteries. The addition of DC provided a better thermal stability of the composite electrolyte as shown by the thermos-gravimetric analysis (TGA). The AC conductivity measurements suggest that the addition of DC to the gel electrolyte had no effect on the overall ionic conductivity of the composite. The obtained films are flexible with high mechanical stretch-ability as compared to the gel type electrolytes only

Monitoring Deformation in Graphene Through Hyperspectral Synchrotron Spectroscopy to Inform Fabrication

The promise from graphene to produce devices with high mobilities and detectors with fast response times is truncated in practice by strain and deformation originating during growth and subsequent processing. This work describes effects from graphene growth, multiple layer transfer, and substrate termination on out of plane deformation, critical to device performance. Synchrotron spectroscopy data was acquired with a state-of-the-art hyperspectral large-area detector to describe growth and processing with molecular sensitivity at wafer length scales. A study of methodologies used in data analysis discouraged dichroic ratio approaches in favor of orbital vector approximations and data mining algorithms. Orbital vector methods provide a physical insight into mobility-detrimental rippling by identifying ripple frequency as main actor, rather than intensity; which was confirmed by data mining algorithms, and in good agreement with electron scattering theories of corrugation in graphene. This work paves the way to efficient information from mechanical properties in graphene in a high throughput mode throughout growth and processing in a materials by design approach

Optical properties of DNA-CTMA biopolymers and applications in metal-biopolymer-metal photodetectors

The potential of using a DNA biopolymer in an electro-optic device is presented. A complex of DNA with the cationic surfactant cetyltrimethylammonium-chloride (CTMA) was used to obtain an organic-soluble DNA material (DNA-CTMA). Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) was added to the DNACTMA to increase the electrical conductivity of the biopolymer. The CW absorbance and time-resolved photoluminescence of the resulting DNA-CTMA and DNA-CTMA-PEDOT:PSS were investigated. Both DNA materials have absorbance peaks at ~260 nm and a broad, Stokes shifted, photoluminescence peak around 470nm. The photoluminescence lifetime of the materials was observed to decrease with increasing UV excitation. Specifically, excitation with a high power ultrafast (~150fs) UV (266nm) laser pulse resulted in a drastic decrease in the photoluminescence lifetime decreases after a few minutes. Moreover, the observed decrease was faster in an air ambient than in a nitrogen ambient. This is most likely due to photo-oxidation that degrades the polymer surface resulting in an increase in the non-radiative recombination. In order to investigate the photoconductivity of these two materials, metal-biopolymer-metal (MBM) ultraviolet photodetectors with interdigitated electrodes were fabricated and characterized. The photoresponsivity of these devices was limited by the transport dynamics within the film. The prospects for the use of these materials in optical devices will be discussed

Optical properties of DNA-CTMA biopolymers and applications in metal-biopolymer-metal photodetectors

The potential of using a DNA biopolymer in an electro-optic device is presented. A complex of DNA with the cationic surfactant cetyltrimethylammonium-chloride (CTMA) was used to obtain an organic-soluble DNA material (DNA-CTMA). Poly(3,4-ethylenedioxythiophene) poly(styrenesulfonate) (PEDOT:PSS) was added to the DNACTMA to increase the electrical conductivity of the biopolymer. The CW absorbance and time-resolved photoluminescence of the resulting DNA-CTMA and DNA-CTMA-PEDOT:PSS were investigated. Both DNA materials have absorbance peaks at ~260 nm and a broad, Stokes shifted, photoluminescence peak around 470nm. The photoluminescence lifetime of the materials was observed to decrease with increasing UV excitation. Specifically, excitation with a high power ultrafast (~150fs) UV (266nm) laser pulse resulted in a drastic decrease in the photoluminescence lifetime decreases after a few minutes. Moreover, the observed decrease was faster in an air ambient than in a nitrogen ambient. This is most likely due to photo-oxidation that degrades the polymer surface resulting in an increase in the non-radiative recombination. In order to investigate the photoconductivity of these two materials, metal-biopolymer-metal (MBM) ultraviolet photodetectors with interdigitated electrodes were fabricated and characterized. The photoresponsivity of these devices was limited by the transport dynamics within the film. The prospects for the use of these materials in optical devices will be discussed

Two-photon absorbing chromophores for photodynamic therapy: molecular engineering and in vivo applications

International audienc

Graphene-Based Test Platform in Potential Application for FET with Guanine as Gate Dielectric

Guanine and poly(methyl methacrylate) (PMMA) layers 60 nm thick were fabricated by physical vapor deposition and spin-coating, respectively, for potential application as bio-based field-effect transistors. A few layers of graphene on a variety of non-flexible and flexible supports were used as substrates for the guanine and PMMA layers. The interactions between these layers and graphene were studied and their effects on the electrical properties of the graphene were monitored over an extended period of time. Guanine had no noticeable effects on the transport properties of graphene. The presence of PMMA reduced the charge-carrier mobility of graphene by up to 42%. This combination has potential for use as a device in biosensors, environmental science, computer-processing, and graphene-based electronics