2,872 research outputs found
Airborne measurement of atmospheric turbulence
A system capable of making measurements of fluctuating atmospheric density is described. Spatial scales required in assessing the quality of coherent radiation propagation are discussed. The special sensors, aircraft installation, data reduction procedures, and other special requirements necessary to obtain meaningful atmospheric turbulence data are also described. The spectral distribution of density fluctuation are presented
Summary of all cycle II.5 shear and boundary layer measurements, aerodynamics
The two measurement systems were used to measure mean velocity and velocity, mass flux, and total temperature fluctuations in the turbulent boundary on the fuselage of a KC-135 aircraft. The boundary layer thickness ranged between about 20 and 30 cm for the range of flight Mach numbers from about 0.25 to 0.85 and Reynolds numbers between 3 and 6 x 10 to the 6th power/m. The adaptation of each system for use in airborne applications is discussed. The data obtained from each system are given and compared with each other and they indicate that the two systems represent viable ones for use in future airborne turbulence experiments
Emergent behavior of soil fungal dynamics:influence of soil architecture and water distribution
Macroscopic measurements and observations in two-dimensional soil-thin sections indicate that fungal hyphae invade preferentially the larger, air-filled pores in soils. This suggests that the architecture of soils and the microscale distribution of water are likely to influence significantly the dynamics of fungal growth. Unfortunately, techniques are lacking at present to verify this hypothesis experimentally, and as a result, factors that control fungal growth in soils remain poorly understood. Nevertheless, to design appropriate experiments later on, it is useful to indirectly obtain estimates of the effects involved. Such estimates can be obtained via simulation, based on detailed micron-scale X-ray computed tomography information about the soil pore geometry. In this context, this article reports on a series of simulations resulting from the combination of an individual-based fungal growth model, describing in detail the physiological processes involved in fungal growth, and of a Lattice Boltzmann model used to predict the distribution of air-liquid interfaces in soils. Three soil samples with contrasting properties were used as test cases. Several quantitative parameters, including Minkowski functionals, were used to characterize the geometry of pores, air-water interfaces, and fungal hyphae. Simulation results show that the water distribution in the soils is affected more by the pore size distribution than by the porosity of the soils. The presence of water decreased the colonization efficiency of the fungi, as evinced by a decline in the magnitude of all fungal biomass functional measures, in all three samples. The architecture of the soils and water distribution had an effect on the general morphology of the hyphal network, with a "looped" configuration in one soil, due to growing around water droplets. These morphologic differences are satisfactorily discriminated by the Minkowski functionals, applied to the fungal biomass
Control of pore geometry in soil microcosms and its effect on the growth and spread of <i>Pseudomonas </i>and <i>Bacillus</i> sp.
Simplified experimental systems, often referred to as microcosms, have played a central role in the development of modern ecological thinking on issues ranging from competitive exclusion to examination of spatial resources and competition mechanisms, with important model-driven insights to the field. It is widely recognized that soil architecture is the key driver of biological and physical processes underpinning ecosystem services, and the role of soil architecture and soil physical conditions is receiving growing interest. The difficulty to capture the architectural heterogeneity in microcosms means that we typically disrupt physical architecture when collecting soils. We then use surrogate measures of soil architecture such as aggregate size distribution and bulk-density, in an attempt to recreate conditions encountered in the field. These bulk-measures are too crude and do not describe the heterogeneity at microscopic scales where microorganisms operate. In the current paper we therefore ask the following questions: (i) To what extent can we control the pore geometry at microscopic scales in microcosm studies through manipulation of common variables such as density and aggregate size?; (ii) What is the effect of pore geometry on the growth and spread dynamics of bacteria following introduction into soil? To answer these questions, we focus on Pseudomonas sp. and Bacillus sp. We study the growth of populations introduced in replicated microcosms packed at densities ranging from 1.2 – 1.6 g cm-3, as well as packed with different aggregate sizes at identical bulk-density. We use X-ray CT and show how pore geometrical properties at microbial scales such as connectivity and solid-pore interface area, are affected by the way we prepare microcosms. At a bulk-density of 1.6 g cm-3 the average number of Pseudomonas was 63% lower than at a bulk-density of 1.3 g cm-3. For Bacillus this reduction was 66 %. Depending on the physical conditions, bacteria in half the samples took between 1.62 and 9.22 days to spread 1.5 cm. Bacillus did spread faster than Pseudomonas and both did spread faster at a lower bulk-density. Our results highlight the importance that soil physical properties be considered in greater detail in soil microbiological studies than is currently the case
Combining X-ray CT and 3D printing technology to produce microcosms with replicable, complex pore geometries
Measurements in soils have been traditionally used to demonstrate that soil architecture is one of the key drivers of soil processes. Major advances in the use of X-ray Computed Tomography (CT) afford significant insight into the pore geometry of soils, but until recently no experimental techniques were available to reproduce this complexity in microcosms. This article describes a 3D additive manufacturing technology that can print physical structures with pore geometries reflecting those of soils. The process enables printing of replicated structures, and the printing materials are suitable to study fungal growth. This technology is argued to open up a wealth of opportunities for soil biological studies
System optimization of gasdynamic lasers, computer program user's manual
The user's manual for a computer program that performs system optimization of gasdynamic lasers is provided. Detailed input/output formats are CDC 7600/6600 computers using a dialect of FORTRAN. Sample input/output data are provided to verify correct program operation along with a program listing
Combination of techniques to quantify the distribution of bacteria in their soil microhabitats at different spatial scales
To address a number of issues of great societal concern at the moment, like the sequestration of carbon, information is direly needed about interactions between soil architecture and microbial dynamics. Unfortunately, soils are extremely complex, heterogeneous systems comprising highly variable and dynamic micro-habitats that have significant impacts on the growth and activity of inhabiting microbiota. Data remain scarce on the influence of soil physical parameters characterizing the pore space on the distribution and diversity of bacteria. In this context, the objective of the research described in this article was to develop a method where X-ray microtomography, to characterize the soil architecture, is combined with fluorescence microscopy to visualize and quantify bacterial distributions in resin-impregnated soil sections. The influence of pore geometry (at a resolution of 13.4 μm) on the distribution of Pseudomonas fluorescens was analysed at macro- (5.2 mm × 5.2 mm), meso- (1 mm × 1 mm) and microscales (0.2 mm × 0.2 mm) based on an experimental setup simulating different soil architectures. The cell density of P. fluorescens was 5.59 x 107(SE 2.6 x 106) cells g−1 soil in 1–2 mm and 5.84 x 107(SE 2.4 x 106) cells g−1 in 2–4 mm size aggregates soil. Solid-pore interfaces influenced bacterial distribution at micro- and macroscale, whereas the effect of soil porosity on bacterial distribution varied according to three observation scales in different soil architectures. The influence of soil porosity on the distribution of bacteria in different soil architectures was observed mainly at the macroscale, relative to micro- and mesoscales. Experimental data suggest that the effect of pore geometry on the distribution of bacteria varied with the spatial scale, thus highlighting the need to consider an “appropriate spatial scale” to understand the factors that regulate the distribution of microbial communities in soils. The results obtained to date also indicate that the proposed method is a significant step towards a full mechanistic understanding of microbial dynamics in structured soils
The efforts of direct support professionals to facilitate inclusion:The role of psychological determinants and work setting
BackgroundVarious studies have found that direct support professionals (DSPs) play an important role in determining the degree to which people with intellectual disabilities (ID) are included in society. However, less research has been conducted on the psychological processes that may influence the behavioural intentions of DSPs to actually engage with and invest effort in supporting their clients' inclusion. Five possible psychological variables are identified in the literature: attitudes, social norms, experienced competencies, identity and meta‐evaluation. In our research, we tested whether these processes influence the (intended) efforts DSPs make to facilitate their clients' inclusion.MethodA structured questionnaire was sent to 927 DSPs working in one of three different locations (an ordinary non‐segregated setting, a reversed non‐segregated setting and a residential facility). Of these, 336 DSPs completed the questionnaire.ResultsSeveral variables revealed differences between the three locations, specifically in efforts to facilitate inclusion, attitudes, social norms, experienced competencies and professional identity. Looking at the overall means, we found (relatively) high scores for the experienced competencies, role identity and meta‐evaluation. In contrast, the means were relatively negative regarding the DSPs' attitudes to inclusion and their assumed social norms.ConclusionsDirect support professionals' efforts to facilitate inclusion depend on their attitude towards inclusion, the experienced competencies, their role identity, the DSPs' meta‐evaluation and, indirectly through attitudes, also on the assumed social norms of the relevant stakeholders. Organizations responsible for supporting people with ID and which may want their DSPs to make greater efforts to facilitate inclusion should pay attention to these psychological variables
Accurate many-body electronic structure near the basis set limit: Application to the chromium dimer
We describe a method for computing near-exact energies for correlated systems with large Hilbert spaces. The method efficiently identifies the most important basis states (Slater determinants) and performs a variational calculation in the subspace spanned by these determinants. A semistochastic approach is then used to add a perturbative correction to the variational energy to compute the total energy. The size of the variational space is progressively increased until the total energy converges to within the desired tolerance. We demonstrate the power of the method by computing a near-exact potential energy curve for a very challenging molecule: the chromium dimer
- …