54 research outputs found

    Histomorphometric evaluation of periodontal compression and tension sides during orthodontic tooth movement in rats

    Get PDF
    Objective: The purpose of this study was to evaluate the thickness of the periodontal ligament of rat molars during orthodontic tooth movement (OTM). Methods: Thirty Wistar rats were divided into three groups of 10 animals each: GI, GII and GIII and the mice were euthanized at 7, 14 and 21 days, respectively. Experimental subjects were compared to their respective controls by the Mann-Whitney test. Comparison of values between compression and tension sides were performed during the same and different time periods through Analysis of Variance (ANOVA), Kruskal-Wallis test and, subsequently, Tukey’s test. Results: Groups GI and GII showed decreased PDL size in the apical regions of the mesiobuccal root and in the cervical region of the distobuccal root. There was also an increased PDL in the cervical regions of the mesiobuccal root, apical region of the distobuccal root and middle region of both roots. Conclusion: The reduction and increase in PDL size were seen in the same root, which characterizes tooth inclination. The apical, middle and cervical regions were compared with one another in each time period and at three times: 7, 14 and 21 days. They were also compared in each region, confirming a tipping movement in GI and GII and a gradual decreased intensity between GI to GII, reaching normal dimension in GIII

    Pulp analysis of teeth submitted to different types of forces: a histological study in rats

    Get PDF
    Objective: The purpose of this study was to histologically evaluate pulp and dentin under induced tooth movement (ITM) with different types of forces. Material and Methods: The maxillary right first molars of rats were submitted to movement with continuous (CF), continuous interrupted (CIF) and intermittent (IF) forces during 5, 7 and 9 days with nickel-titanium (NiTi) closed-coil springs exerting 50cN force magnitude. The groups were histologically evaluated as for cellularity pattern, presence of dystrophic, hemodynamic alterations in the pulp as well dentin alterations. The main observed alterations were related to hemodynamic pulp characteristics, such as presence of thrombosis, vascular congestion and hemorrhages. The hemodynamic alterations were statistically evaluated by Shapiro-Wilk normality test and analysis of variance by the Kruskall-Wallis test. Results: There was no significant differences observed between groups in the different types of applied forces and duration of ITM (vascular congestion, p=1.000; hemorrhage, p=0.305; thrombosis, p=1.000). Conclusions: Pulp tissue alterations resulting from ITM were limited to hemodynamic events, without progressing to irreversible degeneration, regardless of the type of force applied. &nbsp

    Tomografia computadorizada Cone Beam em Ortodontia – evolução ou revolução? Visão geral, aplicações, vantagens/desvantagens e dose de radiação / Cone Beam computed tomography in orthodontia - evolution or revolution? Overview, applications, advantages/dis

    Get PDF
    Introdução: A requisição de imagens tridimensionais (3D) do complexo dentomaxilofacial tem aumentado. Com isso, novas possibilidades para avaliações, tratamento e acompanhamento pós-tratamento tem ganhando notoriedade com o emprego da tomografia computadoriza cone beam (TCCB). As imagens em duas dimensões (2D) apresentam problemas inerentes que podem ser resolvidos com avaliações tridimensionais (3D). Objetivos: Esclarecer as principais dúvidas acerca do mecanismo de funcionamento desse método de diagnóstico complementar, expor as vantagens/desvantagens, discutir sobre a dose de radiação efetiva e possibilidades de aplicação em Ortodontia. Conclusão: As informações geradas pelas imagens em 2D derivadas da TCCB não apresentam diferenças que possam comprometer o planejamento ortodôntico quando comparadas com as imagens das radiografias convencionais em 2D. A dose efetiva de radiação recebida pelo paciente não deve ser considerada como fator limitante da solicitação do exame tomográfico.Palavras-chave: Tomografia. Radiografia. Ortodontia. Radiação.AbstractIntroduction: The request of three-dimensional images (3D) of the dentomaxillofacial complex has increased. Hence, new possibilities for assessment, treatment as well as follow-up after treatment have increased their importance with the use of cone beam computed tomography (CBCT). The images in two dimensions (2D) have inherent problems that can be solved with treedimensional images assessment. Objectives: To clarify the main doubts about the operational mechanism of complementary diagnostic method; to explain the advantages and disadvantages, to discuss the effective radiation dose and possible applications in orthodontia. Conclusion: The information generated by 2D images from the CBCT does not show differences that may endanger the orthodontic planning when compared with the images of 2D conventional radiographs. The effective radiation dose received by the patient should not be considered as a limiting factor of the tomography exam request.Keywords: Tomagraphy. Radiography. Orthodontia. Radiation

    Movimentação dentária e aplicabilidade na clínica ortodôntica

    No full text
    A Ortodontia apresenta como um de seus pilares de sustentação as reações biológicas provenientes da indução mecânica. Desde seu início, vários estudos foram realizados para esclarecer os eventos biológicos decorrentes da movimentação dentária sob indução mecânica. Entretanto, mesmo sabendo-se que entre os procedimentos mecânicos e os fenômenos biológicos que acontecem no cotidiano ortodôntico não deve ocorrer disparidade, frequentemente observa-se uma preponderância para a busca do tipo de aparelhagem e o emprego de forças controladas, principalmente pelos fios. Esses aspectos deixam transparecer, principalmente para o profissional menos experiente, que somente o controle mecânico rege a movimentação dentária. Um exemplo que enfatiza exclusivamente o procedimento mecânico nos cursos de Ortodontia é o typodont. Convém salientar que essa metodologia de ensino é válida para simular a movimentação dentária no aspecto técnico-mecânico, porém, o conhecimento biológico da movimentação deve ter o mesmo nível de importância e não pode haver dicotomia; caso contrário, o resultado da movimentação ortodôntica pode causar prejuízos nas estruturas radiculares, óssea e periodontais, bem como comprometer as diversas estruturas em longo prazo

    Avaliação radiográfica do comportamento dos terceiros molares inferiores em pacientes tratados ortodonticamente com e sem extrações de primeiros pré-molares

    No full text
    OBJETIVO: o presente trabalho objetivou avaliar as alterações ocorridas nas posições dos terceiros molares inferiores em pacientes tratados ortodonticamente com extrações dos primeiros pré-molares. METODOLOGIA: utilizou-se 80 ortopantomografias, obtidas no pré e pós-tratamento ortodôntico corretivo de 40 pacientes, divididos em dois grupos. O grupo 1 constou de 20 pacientes (13 femininos e 7 masculinos) que se submeteram a tratamento ortodôntico com extrações de primeiros pré-molares. O grupo 2 foi constituído por 20 pacientes (13 femininos e 7 masculinos) tratados ortodonticamente sem extrações. Foram estabelecidas medidas angulares, com o objetivo de avaliar as inclinações e medidas lineares, para analisar as modificações no sentido vertical dos terceiros molares. Todos os dados foram mensurados duas vezes, cujos valores médios foram submetidos dos testes t emparelhado e teste t independente. RESULTADOS: os resultados mostraram diferenças estatisticamente significantes (p<0,01) entre as medidas angulares finais e iniciais do grupo 1. CONCLUSÕES: concluiu-se que os deslocamentos verticais dos terceiros molares inferiores são semelhantes nos casos tratados ortodonticamente com e sem extrações e que estes elementos dentários tornam-se mais verticalizados ao final da terapia realizada com extrações de primeiros pré-molares inferiores.AIM: The aim of this study is to evaluate the positional changes occurred with lower third molars in patients treated orthodontically with extractions of first premolars. METHODS: A total of 80 panoramic radiographs obtained at pre and post-treatment periods from 40 patients, were divided into 2 groups: group 1 were composed by 20 patients (13 female and 7 male) that were submitted to orthodontic treatment with extraction of first premolars; group 2 were composed by 20 patients (13 female and 7 male) that were submitted to orthodontic treatment without extractions. Angular measurements were established to evaluate the tipping and linear measurements were established to analyze the vertical changes of the lower third molars. All data were measured twice and averaged, then submitted to paired and unpaired test. RESULTS: Significant differences were found between the initial and final angular measurements of group 1 (p<0.01). CONCLUSIONS: It was concluded that similar vertical changes of lower third molars occurred when extraction and non-extraction cases were compared, and third lower molars became less tipped with the extractions of lower first premolars

    Avaliação ortopantomográfica das angulações mesiodistais de caninos, pré-molares e molares inferiores com e sem a presença dos terceiros molares

    No full text
    OBJETIVOS: comparar os valores médios normais das angulações mesiodistais dentárias, propostos por Ursi, em 1989, com as angulações mesiodistais de caninos, pré-molares e molares inferiores em indivíduos com e sem a presença dos terceiros molares inferiores e idades entre 18 e 25 anos. Além disso, foram comparados os valores das angulações mesiodistais desses dentes nessas duas situações. MÉTODOS: foram utilizadas 40 radiografias ortopantomográficas de indivíduos, de ambos os gêneros, que não receberam tratamento ortodôntico, divididos em dois grupos: Grupo I, constituído por 20 radiografias que não apresentavam os terceiros molares inferiores; e Grupo II, formado por 20 radiografias com os terceiros molares inferiores presentes. RESULTADOS E CONCLUSÕES: a análise dos resultados e a análise estatística permitiram concluir que ambos os grupos exibiram pré-molares e molares inferiores mais angulados em sentido mesial, quando comparados à oclusão normal. Por outro lado, a angulação mesiodistal de caninos inferiores mostrou-se semelhante àquela apresentada em casos de oclusão normal. Os dois grupos, quando comparados entre si, exibiram semelhantes valores angulares dos caninos, pré-molares e molares inferiores, de modo que a presença dos terceiros molares não exerceu influência sobre essas angulações mesiodistais dentárias.AIM: To compare the normal mean values of the mesiodistal axial angulation, proposed by Ursi in 1989, with the mesiodistal axial angulation of canine teeth, premolar and inferior molars in individuals with and without the presence of the third inferior molars and ages between 18 and 25 years. Besides, the values of the mesiodistal axial angulation of these teeth were compared in these two situations. METHODS: Forty panoramic x-rays were used from individuals of both genders that didn't receive orthodontic treatment, divided in two groups: Group I, constituted by 20 x-rays that didn't present the third inferior molars, and Group II, formed by 20 x-rays with the presence of the third inferior molars. RESULTS and CONCLUSIONS: The results analysis and the statistical analysis allowed to conclude that both Groups exhibited inferior premolar and molars more angled in mesial direction when compared to the normal occlusion. on the other hand, the mesiodistal axial angulation of inferior canine teeth was similar to the presented in cases of normal occlusion. The two groups, when compared amongst themselves, exhibited similar angular values of the canine teeth, premolar and inferior molars, so that the presence of the third molars didn't exercise influence on these dental angulations

    Mordida cruzada posterior, correccion y consideraciones: caso clínico con 7 años de seguimiento

    No full text
    Early treatment of functional unilateral posterior crossbite during the mixed dentition is extremely important for contemporary Orthodontics, provides the correct positioning of osseous bases, teeth and temporomadibular joint when the stomatognathic system is in growth and development. These results generally develop into an adequate craniofacial relationship, reducing the necessity for more complex treatments at permanent dentition. The subject of this paper was to report patient 8 years old, diagnosed with functional unilateral posterior crossbite, and was treated by an expander appliance type Quad-helix emphasizing the long-term stability. The malocclusion was corrected in 3 months of active use of the appliance, 3 months for retention purposes and followed up during 7 years post-treatment. The stability in long term of functional unilateral posterior crossbite treated is closely related with early diagnostic, the elimination of the etiological factor associated with a correct appliance and the mechanic of treatment.El tratamiento precoz de la mordida cruzada posterior unilateral funcional durante la dentición mixta es extremadamente importante para la Ortodoncia contemporánea porque provee un correcto posicionamiento de las bases óseas, dientes y de la articulación temporomandibular cuando el sistema estomatognático está en pleno crecimiento y desarrollo. Estos resultados generalmente producen una adecuada relación Craneofacial, reduciendo la necesidad de tratamientos cada vez más complejos en la dentición permanente. El propósito de este artículo fue presentar el caso de un niño que a los 8 años de edad fue diagnosticado, mordida cruzada posterior unilateral funcional, tratado por medio de un expansor fijo tipo Quad-helix donde enfatizamos la estabilidad a largo plazo. La maloclusión fue corregida en tres meses de uso activo del Quad-helix, tres meses de contención y fue realizado un seguimiento post tratamiento por siete años. La estabilidad a largo plazo del tratamiento de la mordida cruzada posterior unilateral funcional está íntimamente relacionada con el diagnostico precoz, la eliminación del factor etiológico asociado con la correcta aparatología y la mecánica de tratamiento
    corecore