408 research outputs found
Recommended from our members
Prominin-1 (CD133) Defines Both Stem and Non-Stem Cell Populations in CNS Development and Gliomas
Prominin-1 (CD133) is a commonly used cancer stem cell marker in central nervous system (CNS) tumors including glioblastoma (GBM). Expression of Prom1 in cancer is thought to parallel expression and function in normal stem cells. Using RNA in situ hybridization and antibody tools capable of detecting multiple isoforms of Prom1, we find evidence for two distinct Prom1 cell populations in mouse brain. Prom1 RNA is first expressed in stem/progenitor cells of the ventricular zone in embryonic brain. Conversely, in adult mouse brain Prom1 RNA is low in SVZ/SGZ stem cell zones but high in a rare but widely distributed cell population (Prom1hi). Lineage marker analysis reveals Prom1hi cells are Olig2+Sox2+ glia but Olig1/2 knockout mice lacking oligodendroglia retain Prom1hi cells. Bromodeoxyuridine labeling identifies Prom1hi as slow-dividing distributed progenitors distinct from NG2+Olig2+ oligodendrocyte progenitors. In adult human brain, PROM1 cells are rarely positive for OLIG2, but express astroglial markers GFAP and SOX2. Variability of PROM1 expression levels in human GBM and patient-derived xenografts (PDX) – from no expression to strong, uniform expression – highlights that PROM1 may not always be associated with or restricted to cancer stem cells. TCGA and PDX data show that high expression of PROM1 correlates with poor overall survival. Within proneural subclass tumors, high PROM1 expression correlates inversely with IDH1 (R132H) mutation. These findings support PROM1 as a tumor cell-intrinsic marker related to GBM survival, independent of its stem cell properties, and highlight potentially divergent roles for this protein in normal mouse and human glia
T1 and ECV Mapping in Myocardial Disease
T1 mapping using cardiovascular magnetic resonance (CMR) introduces novel techniques for myocardial tissue characterization to detect and quantify disease processes occurring at the microscopic level. Even though T1 mapping has limited spatial resolution, cellular and molecular changes occurring within each voxel can affect the aggregate T1 signal rendering them quantifiable. The estimated T1-based parameters quantified on a “map” demonstrate the spatial localization of these changes whereby each pixel expresses the quantitative value of that parameter. This quantification permits detection of diffuse disease even if it is not directly visible. Rather than relying on nonspecific functional measures, T1 mapping focuses on intrinsic changes of myocardial composition that advances understanding about specific disease pathways. These changes in myocardial tissue composition inform diagnosis and prognosis. T1 mapping encompasses two key parameters: native (i.e., precontrast) T1 and extracellular volume fraction (ECV) derived from additional postcontrast T1 and blood T1 measurements. These advances introduce new tools to detect focal and diffuse myocardial derangements occurring in cardiac disease that can be otherwise difficult to detect. T1 and ECV mapping foster precision medicine and personalized care, promising to improve patient outcomes through targeted therapy. Capitalizing on the opportunities introduced by T1 mapping and ECV requires further investigation
New measurement approaches for film thickness and wall temperature in falling film heat exchangers
Papers presented to the 11th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 20-23 July 2015.Falling film evaporation is used in various fields, e.g.
food and pulp & paper industry. Evaporation is very energy
intense and relatively small efficiency improvements to the
techniques can lead to large savings in absolute numbers.
Falling film evaporation is affected by the wave dynamics;
hence further knowledge of the behaviour of the liquid film
flow can promote efficiency improvements.
In this work, two new measurement approaches have
been investigated. The first approach is to use a laser
triangulation scanner combined with a high-speed camera
where the laser scanner continuously measures the film
thickness along a vertical line, resolving the flow pattern in
high detail. The second approach is to measure local wall
temperatures, enabling calculation of local heat transfer
coefficients at any desired location.
These methods has been tested and evaluated in a falling
film test facility. Both approaches have proven to give
valuable insights into the process and the results are in good
agreement with literature data.am201
Investigation of Phase-Lagged Boundary Conditions for Turbulence Resolving Turbomachinery Simulations
The present work explores whether phase-lagged boundary conditions can be used to perform scale resolving simulations of turbomachines. The phase-lagged approach considered is based on storing the flow signal, both at the pitch-wise boundaries and the rotor-stator interface, as its temporal Fourier coefficients for a finite number of harmonics. The method is implemented in an in-house CFD solver, G3D::Flow, which can perform both URANS and hybrid RANS/LES simulations. In order to evaluate the performance of the phase-lagged boundary condition, a comparison is made with a sliding mesh simulation on a compressor cascade. Furthermore, the possibility of breaking an error feedback loop generated in the sampling process by including multiple blade passages is also investigated. It is found that this approach greatly improves convergence and accuracy of the sampling
Hydrothermal liquefaction of kraft lignin in sub-critical water: the influence of the sodium and potassium fraction
As a part of developing a hydrothermal liquefaction (HTL) process to valorise lignin, it is important to consider integration possibilities with existing infrastructures in order to obtain an overall positive economic impact. One obvious example is to integrate the HTL process with the kraft pulp mill: transport and storage costs is reduced, the temperature levels on process streams can be matched (energy integration) and the recovery/use of alkali can be made efficient. In this study, softwood kraft lignin was depolymerised using sub-critical water (623\ua0K; 25\ua0MPa) in a continuous, small pilot unit with a flow rate of 2\ua0kg/h. ZrO2, K2CO3/KOH and Na2CO3/NaOH were used as catalytic system, and phenol as the capping agent. The influence of the ratio between sodium and potassium in the feed on the yield and composition of the product stream was investigated. The results showed that bio-oil, water-soluble organics (WSO) and char yields were not remarkably influenced by shifting the catalytic system from potassium to sodium. Moreover, the yields of most phenolic compounds did not change significantly when the sodium fraction was varied in the feed. The amounts of suspended solids in the bio-oil produced showed, however, a diminishing trend, (decrease from 10.8 to 3.8%) when the sodium fraction was increased in the feed, whilst the opposite trend was observed for the heavy oil, which increased from 24.6 to 37.6%
Haptic pop-out of movable stimuli
When, in visual and haptic search, a target is easily found among distractors, this is called a pop-out effect. The target feature is then believed to be salient, and the search is performed in a parallel way. We investigated this effect with movable stimuli in a haptic search task. The task was to find a movable ball among anchored distractors or the other way round. Results show that reaction times were independent of the number of distractors if the movable ball was the target but increased with the number of items if the anchored ball was the target. Analysis of hand movements revealed a parallel search strategy, shorter movement paths, a higher average movement speed, and a narrower direction distribution with the movable target, as compared with a more detailed search for an anchored target. Taken together, these results show that a movable object pops out between anchored objects and this indicates that movability is a salient object feature. Vibratory signals resulting from the movable ball were found to be a reasonable explanation regarding the sensation responsible for the pop-out of movability
Acute response to oral calcium loading in pregnant and lactating women with a low calcium intake: a pilot study
The cellular and synaptic architecture of the mechanosensory dorsal horn
The deep dorsal horn is a poorly characterized spinal cord region implicated in processing low-threshold mechanoreceptor (LTMR) information. We report an array of mouse genetic tools for defining neuronal components and functions of the dorsal horn LTMR-recipient zone (LTMR-RZ), a role for LTMR-RZ processing in tactile perception, and the basic logic of LTMR-RZ organization. We found an unexpectedly high degree of neuronal diversity in the LTMR-RZ: seven excitatory and four inhibitory subtypes of interneurons exhibiting unique morphological, physiological, and synaptic properties. Remarkably, LTMRs form synapses on between four and 11 LTMR-RZ interneuron subtypes, while each LTMR-RZ interneuron subtype samples inputs from at least one to three LTMR classes, as well as spinal cord interneurons and corticospinal neurons. Thus, the LTMR-RZ is a somatosensory processing region endowed with a neuronal complexity that rivals the retina and functions to pattern the activity of ascending touch pathways that underlie tactile perception
- …