The evolution of tooth wear indices

Tooth wear—attrition, erosion and abrasion—is perceived internationally as an ever-increasing problem. Clinical and epidemiological studies, however, are difficult to interpret and compare due to differences in terminology and the large number of indices that have been developed for diagnosing, grading and monitoring dental hard tissue loss. These indices have been designed to identify increasing severity and are usually numerical. Some record lesions on an aetiological basis (e.g. erosion indices), others record lesions irrespective of aetiology (tooth wear indices); none have universal acceptance, complicating the evaluation of the true increase in prevalence reported. This article considers the ideal requirements for an erosion index. It reviews the literature to consider how current indices have evolved and discusses if these indices meet the clinical and research needs of the dental profession

Magnesia-Based Cements: A Journey of 150 Years, and Cements for the Future?

This review examines the detailed chemical insights that have been generated through 150 years of work worldwide on magnesium-based inorganic cements, with a focus on both scientific and patent literature. Magnesium carbonate, phosphate, silicate-hydrate, and oxysalt (both chloride and sulfate) cements are all assessed. Many such cements are ideally suited to specialist applications in precast construction, road repair, and other fields including nuclear waste immobilization. The majority of MgO-based cements are more costly to produce than Portland cement because of the relatively high cost of reactive sources of MgO and do not have a sufficiently high internal pH to passivate mild steel reinforcing bars. This precludes MgO-based cements from providing a large-scale replacement for Portland cement in the production of steel-reinforced concretes for civil engineering applications, despite the potential for CO2 emissions reductions offered by some such systems. Nonetheless, in uses that do not require steel reinforcement, and in locations where the MgO can be sourced at a competitive price, a detailed understanding of these systems enables their specification, design, and selection as advanced engineering materials with a strongly defined chemical basis

A castor oil-containing dental luting agent: effects of cyclic loading and storage time on flexural strength

Favorable results in the use of castor oil polyurethane (COP) as pulp capping, membrane material, sealer, mouthwash and in bone repair, associated with the fact that Ricinus communis is not derived from petroleum and it is abundant in Brazil, encourage researches in the development of luting agents. Objectives This study compared the flexural strength (FS) of a castor oil-containing dental luting agent with a weight percentage of 10% (wt%) of calcium carbonate (COP10) with RelyX ARC (RX) after mechanical cycling (MC) and distilled water storage. Material and Methods Sixty-four specimens (25x2x2 mm) were fabricated and divided into two groups, COP10 and RX (control). Each group was divided into 4 subgroups (n=8) according to the storage time, 24 hours (24 h) or 60 days (60 d), and the performance (MC+FS) or not (only FS) of the mechanical cycling test. The FS (10 kN; 0.5 mm/min) and MC tests (10,000 cycles, 5 Hz, 0.5 mm/min) were carried out using an MTS-810 machine. The data were analyzed using ANOVA (α=0.05). Results The obtained FS (MPa) values were: COP10 24h- 19.04±2.41; COP10 60d- 17.92±3.54; RX 24h- 75.19±3.43; RX 60d- 88.77±6.89. All the RX specimens submitted to MC fractured, while the values for COP10 after MC were as follows: COP10 24h- 17.90±1.87 and COP10 60d- 18.60±1.60. Conclusions A castor oil-containing dental luting agent with a weight percentage of 10% (wt%) of calcium carbonate is resistant to mechanical cycling without decreases in flexural strength. However, mean COP10 showed only about 25% of the RelyX ARC mean flexural strength

TENSILE BOND STRENGTH OF MAXILLOFACIAL ADHESIVES

A common technique for fixation of facial prostheses is the use of skin adhesives. The present study compared the tensile bond strength of five RTV-silicone elastomers used with four different skin adhesives to human skin. The elastomers were: Silskin II, MDX4-4210, Cosmesil, Cosmesil HC2, and RS 330 T-RTV. The adhesives were: Dow Corning 355 medical adhesive, PSA 1, Daro, and 9874 3M double-coated medical tape. The RTV silicones were cured as described by the manufacturer, fixed in circular metal holders, and glued to the skin (inner aspect of forearm) with the various adhesives. The specimens were pulled off 20 seconds after fixation by use of a universal testing machine with a crosshead speed of 1 mm/minute. Eight specimens of each silicone and adhesive combination were tested, and a mean bond strength was calculated for each combination and compared by Duncan’s multiple range test on a personal computer. Significant differences were observed among the various combinations of silicones and adhesives. Dow Corning 355 adhesive showed the highest bond strength with all materials, and the medical tape had the lowest. Differences between the RTV silicones were also significant. The strongest bond with all adhesives was MDX4-4210 elastomer and the weakest for RS 330 T-RTV elastomer