Islands stretch test for measuring the interfacial fracture energy between a hard film and a soft substrate

We present a technique for measuring the interfacial fracture energy, $\Gamma_i$, between a hard thin film and a soft substrate. A periodic array of hard thin islands is fabricated on a soft substrate, which is then subjected to uniaxial tension under an optical microscope. When the applied strain reaches a critical value, delamination between the islands and the substrate starts from the edge of the islands. As the strain is increased, the interfacial cracks grow in a stable fashion. At a given applied strain, the width of the delaminated region is a unique function of the interfacial fracture energy. We have calculated the energy release rate driving the delamination as a function of delamination width, island size, island thickness, and applied strain. For a given materials system, this relationship allows determination of the interfacial fracture energy from a measurement of the delamination width. The technique is demonstrated by measuring the interfacial fracture energy of plasma-enhanced chemical vapor deposition SiNx islands on a polyimide substrate. We anticipate that this technique will find application in the flexible electronics industry where hard islands on soft substrates are a common architecture to protect active devices from fracture.Engineering and Applied Science

Inorganic Islands on a Highly Stretchable Polyimide Substrate

For a flexible electronic device integrating inorganic materials on a polymer substrate, the polymer can deform substantially, but the inorganic materials usually fracture at small strains. This paper describes an approach to make such a device highly stretchable. A polyimide substrate is first coated with a thin layer of an elastomer, on top of which SiNx islands are fabricated. When the substrate is stretched to a large strain, the SiNx islands remain intact. Calculations confirm that the elastomer reduces the strain in the SiNx islands by orders of magnitude.Engineering and Applied Science

Factors affecting the long-term outcomes of idiopathic membranous nephropathy

Abstract Background We attempted to describe the clinical features and determine the factors associated with renal survival in idiopathic membranous nephropathy (iMN) patients with nephrotic syndrome (NS) and to determine the factors associated with spontaneous complete remission (sCR) and progression to NS in iMN patients with subnephrotic proteinuria. Methods This retrospective study involved 166 iMN patients with NS and 65 patients with subnephrotic proteinuria. The primary end point was a doubling of serum creatinine or initiation of dialysis. In patients with subnephrotic proteinuria, we determined the factors associated with sCR and factors associated with progression to NS. Results Remission of NS was achieved in 125 out of 166 patients (75.3%). Of those who reached remission, 26 patients (20.8%) experienced relapse that was followed by second remission. The relapse or persistence of proteinuria was associated with the primary end points (hazard ratio [HR] = 12.40, P = 0.037, HR = 173, P < 0.001, respectively). In patients with subnephrotic proteinuria, sCR occurred in 35.4% of the patients. The patients with sCR had lower proteinuria and serum creatinine levels and higher serum albumin concentrations at baseline. The serum albumin level at diagnosis was a prognostic factor for progression to NS (Odds ratio [OR] = 0.015, P < 0.001). Conclusions The occurrence of relapse or persistence of proteinuria had negative effects on renal survival in iMN patients with NS, and low serum albumin levels at baseline were associated with non-achievement of sCR and progression to NS

Aortic Dissection and Rupture in a Child

After developing sudden severe chest pain, an 11-year-old boy presented to the emergency room with chest pain and palpitations and was unable to stand up. The sudden onset of chest pain was first reported while swimming at school about 30 minutes prior to presentation. Arterial blood pressure (BP) was 150/90 mmHg, heart rate was 120/minute, and the chest pain was combined with shortness of breath and diaphoresis. During the evaluation in the emergency room, the chest pain worsened and abdominal pain developed. An aortic dissection was suspected and a chest and abdomen CT was obtained. The diagnosis of aortic dissection type B was established by CT imaging. The patient went to surgery immediately with BP control. He died prior to surgery due to aortic rupture. Here we present this rare case of aortic dissection type B with rupture, reported in an 11-year-old Korean child

Thermal analysis of bulk filled composite resin polymerization using various light curing modes according to the curing depth and approximation to the cavity wall

OBJECTIVE: The purpose of this study was to investigate the polymerization temperature of a bulk filled composite resin light-activated with various light curing modes using infrared thermography according to the curing depth and approximation to the cavity wall. MATERIAL AND METHODS: Composite resin (AeliteFlo, Bisco, Schaumburg, IL, USA) was inserted into a Class II cavity prepared in the Teflon blocks and was cured with a LED light curing unit (Dr's Light, GoodDoctors Co., Seoul, Korea) using various light curing modes for 20 s. Polymerization temperature was measured with an infrared thermographic camera (Thermovision 900 SW/TE, Agema Infra-red Systems AB, Danderyd, Sweden) for 40 s at measurement spots adjacent to the cavity wall and in the middle of the cavity from the surface to a 4 mm depth. Data were analyzed according to the light curing modes with one-way ANOVA, and according to curing depth and approximation to the cavity wall with two-way ANOVA. RESULTS: The peak polymerization temperature of the composite resin was not affected by the light curing modes. According to the curing depth, the peak polymerization temperature at the depth of 1 mm to 3 mm was significantly higher than that at the depth of 4 mm, and on the surface. The peak polymerization temperature of the spots in the middle of the cavity was higher than that measured in spots adjacent to the cavity wall. CONCLUSION: In the photopolymerization of the composite resin, the temperature was higher in the middle of the cavity compared to the outer surface or at the internal walls of the prepared cavity

Inorganic islands on a highly stretchable polyimide substrate

Abstract For a flexible electronic device integrating inorganic materials on a polymer substrate, the polymer can deform substantially, but the inorganic materials usually fracture at small strains. This paper describes an approach to make such a device highly stretchable. A polyimide substrate is first coated with a thin layer of an elastomer, on top of which SiN x islands are fabricated. When the substrate is stretched to a large strain, the SiN x islands remain intact. Calculations confirm that the elastomer reduces the strain in the SiN x islands by orders of magnitude

Efficacy and safety of rapid intermittent correction compared with slow continuous correction with hypertonic saline in patients with moderately severe or severe symptomatic hyponatremia: study protocol for a randomized controlled trial (SALSA trial)

Abstract Background Hyponatremia is the most common electrolyte imbalance encountered in clinical practice, associated with increased mortality and length of hospital stay. However, no high-quality evidence regarding whether hypertonic saline is best administered as a continuous infusion or a bolus injection has been found to date. Therefore, in the current study, we will evaluate the efficacy and safety of rapid intermittent correction compared with slow continuous correction with hypertonic saline in patients with moderately severe or severe symptomatic hyponatremia. Methods/design This is a prospective, investigator-initiated, multicenter, open-label, randomized controlled study with two experimental therapy groups. A total of 178 patients with severe symptomatic hyponatremia will be enrolled and randomly assigned to receive either rapid intermittent bolus or slow continuous infusion management with hypertonic saline. The primary outcome is the incidence of overcorrection at any given period over 2 days. The secondary outcomes will include the efficacy and safety of two other approaches to the treatment of hyponatremia with 3% hypertonic saline. Discussion This is the first clinical trial to investigate the efficacy and safety of rapid intermittent correction compared with slow continuous correction with hypertonic saline in patients with moderately severe or severe hyponatremia. Trial registration ClinicalTrials.gov, identifier number: NCT02887469 . Registered on 1 August 2016