Handling and analysis of ices in cryostats and glove boxes in view of cometary samples

Comet nucleus sample return mission and other return missions from planets and satellites need equipment for handling and analysis of icy samples at low temperatures under vacuum or protective gas. Two methods are reported which were developed for analysis of small icy samples and which are modified for larger samples in cometary matter simulation experiments (KOSI). A conventional optical cryostat system was modified to allow for transport of samples at 5 K, ion beam irradiation, and measurement in an off-line optical spectrophotometer. The new system consists of a removable window plug containing nozzles for condensation of water and volatiles onto a cold finger. This plug can be removed in a vacuum system, changed against another plug (e.g., with other windows (IR, VIS, VUV) or other nozzles). While open, the samples can be treated under vacuum with cooling by manipulators (cut, removal, sample taking, irradiation with light, photons, or ions). After bringing the plug back, the samples can be moved to another site of analysis. For handling the 30 cm diameter mineral-ice samples from the KOSI experiments an 80x80x80 cm glove box made out of plexiglass was used. The samples were kept in a liquid nitrogen bath, which was filled from the outside. A stream a dry N2 and evaporating gas from the bath purified the glove box from impurity gases and, in particular, H2O, which otherwise would condense onto the samples

Composition and luminescence studies of InGaN epilayers grown at different hydrogen flow rates

Indium gallium nitride (In(x)Ga(1-x)N) is a technologically important material for many optoelectronic devices, including LEDs and solar cells, but it remains a challenge to incorporate high levels of InN into the alloy while maintaining sample quality. A series of InGaN epilayers was grown with different hydrogen flow rates (0-200 sccm) and growth temperatures (680-750 °C) to obtain various InN fractions and bright emission in the range 390-480 nm. These 160-nm thick epilayers were characterized through several compositional techniques (wavelength dispersive x-ray spectroscopy, x-ray diffraction, Rutherford backscattering spectrometry) and cathodoluminescence hyperspectral imaging. The compositional analysis with the different techniques shows good agreement when taking into account compositional gradients evidenced in these layers. The addition of small amounts of hydrogen to the gas flow at lower growth temperatures is shown to maintain a high surface quality and luminescence homogeneity. This allowed InN fractions of up to ~16% to be incorporated with minimal peak energy variations over a mapped area while keeping a high material quality

Virtual Electrode Design for Lithium-Ion Battery Cathodes

Microstructural characteristics of lithium‐ion battery cathodes determine their performance. Thus, modern simulation tools are increasingly important for the custom design of multiphase cathodes. This work presents a new method for generating virtual, yet realistic cathode microstructures. A precondition is a 3D template of a commercial cathode, reconstructed via focused ion beam/scanning electron microscopy (FIB/SEM) tomography and appropriate algorithms. The characteristically shaped micrometer‐sized active material (AM) particles and agglomerates of nano‐sized carbon‐binder (CB) particles are individually extracted from the voxel‐based templates. Thereby, a library of roughly 1100 AM particles and 20 CB agglomerates is created. Next, a virtual cathode microstructure is predefined, and representative sets of AM particles and CB agglomerates are built. The following re‐assembly of AM particles within a predefined volume box works using dropping and rolling algorithms. Thereby, one can generate cathodes with specified characteristics, such as the volume fraction of AM, CB and pore space, particle‐size distributions, and gradients thereof. Naturally, such a virtual twin is a promising starting point for physics‐based electrochemical performance models. The workflow from the commercial cathode microstructure through to a full virtual twin will be explained and assessed for a blend cathode made of the two AMs, LiNiCoAlO$_{2}$ (NCA) and LiCoO$_{2}$ (LCO)

Antibody-based immunotherapy for ovarian cancer: where are we at?

Cytoreductive surgery and chemotherapy continue to be the mainstay of ovarian cancer treatment. However, as mortality from advanced ovarian cancer remains very high, novel therapies are required to be integrated into existing treatment regimens. Immunotherapy represents an alternative and rational therapeutic approach for ovarian cancer based on a body of evidence supporting a protective role of the immune system against these cancers, and on the clinical success of immunotherapy in other malignancies. Whether or not immunotherapy will have a role in the future management of ovarian cancer is too early to tell, but research in this field is active. This review will discuss recent clinical developments of selected immunotherapies for ovarian cancer which fulfil the following criteria: (i) they are antibody-based, (ii) target a distinct immunological pathway, and (iii) have reached the clinical trial stage. Specifically, the focus is on Catumaxomab (anti-EpCAM × anti-CD3), Abagovomab, Oregovomab (anti-CA125), Daclizumab (anti-CD25), Ipilimumab (anti-CTLA-4), and MXD-1105 (anti-PD-L1). Catumaxomab has reached phase III clinical trials and exhibits promise with reports, showing that it can cause a significant and sustained reduction in ascites. Phase I-III clinical trials continue to be conducted on the other antibodies, some of which have had encouraging reports. We will also provide our perspective on the future of immunotherapy for ovarian cancer, and how it may be best employed in treatment regimen

Silicon Photomultipliers for Orbital Ultra High EnergyCosmic Ray Observation

Development of the Silicon photomultiplier Elementary Cell Add-on camera (SiECA) has provided extensive information regarding the use of SiPMs for future cosmic ray detection systems. We present the technical aspects of sensor readout development utilizing Citiroc ASIC chips from Weeroc controlled by a Xilinx FPGA to process and package events from four 64 channel Hamamatsu MPPC S13361 arrays generating 128 frame events with an integration time of 2.5ms (parameters are based on JEM-EUSO geometry but can be easily adjusted). With single photon counting capability, SiECA proves SiPM are viable sensors to replace Multi-Anode PhotoMultiplier Tubes in future devices, especially when high luminosity exposure is possible potentially damaging MAPMT based systems. Complementary to the technical aspects, computational and analysis methods for sensor array characterization and in depth device flat-fielding are presented. Provided channel by channel biasing, in comparison to uniform biasing with MAPMTs, fine tuning of operating parameters with MPPC arrays allows for substantial improvements in detector and signal uniformity.Comment: presented at the 36th ICRC (Madison, WI; 2019

Conflicting estimates of natural geologic methane emissions

Global bottom-up and top-down estimates of natural, geologic methane (CH4) emissions (average approximately 45 Tg yr–1) have recently been questioned by near-zero (approximately 1.6 Tg yr–1) estimates based on measurements of 14CH4 trapped in ice cores, which imply that current fossil fuel industries' CH4 emissions are underestimated by 25%–40%. As we show here, such a global near-zero geologic CH4 emission estimate is incompatible with multiple independent, bottom-up emission estimates from individual natural geologic seepage areas, each of which is of the order of 0.1–3 Tg yr–1. Further research is urgently needed to resolve the conundrum before rejecting either method or associated emission estimates in global CH4 accounting

Behavior of feral horses in response to culling and GnRH immunocontraception

AbstractWildlife management actions can alter fundamental behaviors of individuals and groups, which may directly impact their life history parameters in unforeseen ways. This is especially true for highly social animals because changes in one individual's behavior can cascade throughout its social network. When resources to support populations of social animals are limited and populations become locally overabundant, managers are faced with the daunting challenge of decreasing population size without disrupting core behavioral processes. Increasingly, managers are turning to fertility control technologies to supplement culling in efforts to suppress population growth, but little is quantitatively known about how either of these management tools affects behavior. Gonadotropin releasing hormone (GnRH) is a small neuropeptide that performs an obligatory role in mammalian reproduction and has been formulated into the immunocontraceptive GonaCon-B™. We investigated the influences of this vaccine on behavior of feral horses (Equus caballus) at Theodore Roosevelt National Park, North Dakota, USA, for a year preceding and a year following nonlethal culling and GnRH-vaccine treatment. We observed horses during the breeding season and found only minimal differences in time budget behaviors of free-ranging female feral horses treated with GnRH and those treated with saline. The differences observed were consistent with the metabolic demands of pregnancy and lactation. We observed similar social behaviors between treatment groups, reflecting limited reproductive behavior among control females due to high rates of pregnancy and suppressed reproductive behavior among treated females due to GnRH-inhibited ovarian activity. In the treatment year, band stallion age was the only supported factor influencing herding behavior (P<0.001), harem-tending behavior (P<0.001), and agonistic behavior (P=0.02). There was no difference between the mean body condition of control females (4.9 (95% CI=4.7–5.1)) and treated females (4.8 (95% CI=4.7–4.9)). Band fidelity among all females increased 25.7% in the year following vaccination and culling, despite the social perturbation associated with removal of conspecifics. Herding behavior by stallions decreased 50.7% following treatment and culling (P<0.001), while harem-tending behavior increased 195.0% (P<0.001). The amount of available forage influenced harem-tending, reproductive, and agonistic behavior in the year following culling and treatment (P<0.04). These changes reflected the expected nexus between a species with polygynous social structure and strong group fidelity and the large instantaneous change in population density and demography coincident with culling. Behavioral responses to such perturbation may be synergistic in reducing grazing pressure by decreasing energetically expensive competitive behaviors, but further investigation is needed to explicitly test this hypothesis

Improved limits on nuebar emission from mu+ decay

We investigated mu+ decays at rest produced at the ISIS beam stop target. Lepton flavor (LF) conservation has been tested by searching for \nueb via the detection reaction p(\nueb,e+)n. No \nueb signal from LF violating mu+ decays was identified. We extract upper limits of the branching ratio for the LF violating decay mu+ -> e+ \nueb \nu compared to the Standard Model (SM) mu+ -> e+ nue numub decay: BR < 0.9(1.7)x10^{-3} (90%CL) depending on the spectral distribution of \nueb characterized by the Michel parameter rho=0.75 (0.0). These results improve earlier limits by one order of magnitude and restrict extensions of the SM in which \nueb emission from mu+ decay is allowed with considerable strength. The decay \mupdeb as source for the \nueb signal observed in the LSND experiment can be excluded.Comment: 10 pages, including 1 figure, 1 tabl