Deposition of La2Zr2O7 Film by Chemical Solution Deposition

La2Zr2O7 (LZO) formation of bulk powders and of films by Chemical Solution Deposition (CSD) process have been studied using propionates. The treatment involved a one step cycle in the reducing forming gas (Ar-5%H2) to be compatible with Ni-5at%W RABITS. Large amount of residual carbon was found in LZO powders formed in these conditions (10 wt %). The volume fraction of the cube texture in LZO films on Ni-5at%w RABITS was found to be a function of the speed of the gas flown above sample. This phenomenon is discussed in considering the C deposited from the carbon-containing gases emitted during the pyrolysis of the precursor. Using proper conditions (950 ^\circC and the speed of gas of 6.8\times10^{-2} m/s), LZO films with good surface crystallinity could be obtained on Ni-5at%W RABITS as demonstrated by X-ray diffraction, electron backscattered diffraction and RHEED. The existence of residual carbon in oxide films is a common question to films deposited by CSD processes under reducing condition

Induction in a von Karman flow driven by ferromagnetic impellers

We study magnetohydrodynamics in a von K\'arm\'an flow driven by the rotation of impellers made of material with varying electrical conductivity and magnetic permeability. Gallium is the working fluid and magnetic Reynolds numbers of order unity are achieved. We find that specific induction effects arise when the impeller's electric and magnetic characteristics differ from that of the fluid. Implications in regards to the VKS dynamo are discussed.Comment: 14 pages, 7 figure

Generation of magnetic field by dynamo action in a turbulent flow of liquid sodium

We report the observation of dynamo action in the VKS experiment, i.e., the generation of magnetic field by a strongly turbulent swirling flow of liquid sodium. Both mean and fluctuating parts of the field are studied. The dynamo threshold corresponds to a magnetic Reynolds number Rm \sim 30. A mean magnetic field of order 40 G is observed 30% above threshold at the flow lateral boundary. The rms fluctuations are larger than the corresponding mean value for two of the components. The scaling of the mean square magnetic field is compared to a prediction previously made for high Reynolds number flows.Comment: 4 pages, 5 figure

First time determination of the microscopic structure of a stripe phase: Low temperature NMR in La2NiO4.17

The experimental observations of stripes in superconducting cuprates and insulating nickelates clearly show the modulation in charge and spin density. However, these have proven to be rather insensitive to the harmonic structure and (site or bond) ordering. Using 139La NMR in La2NiO4.17, we show that in the 1/3 hole doped nickelate below the freezing temperature the stripes are strongly solitonic and site ordered with Ni3+ ions carrying S=1/2 in the domain walls and Ni2+ ions with S=1 in the domains.Comment: 4 pages including 4 figure

Similarity of slow stripe fluctations between Sr-doped cuprates and oxygen-doped nickelates

Stripe fluctuations in La2NiO4.17 have been studied by 139La NMR using the field and temperature dependence of the linewidth and relaxation rates. In the formation process of the stripes the NMR line intensity is maximal below 230K, starts to diminish around 140K, disappears around 50K and recovers at 4K. These results are shown to be consistent with, but completely complementary to neutron measurements, and to be generic for oxygen doped nickelates and underdoped cuprates.Comment: 4 pages including 4 figure

Non-perturbative measurement of low-intensity charged particle beams

Non-perturbative measurements of low-intensity charged particle beams are particularly challenging to beam diagnostics due to the low amplitude of the induced electromagnetic fields. In the low-energy antiproton decelerator (AD) and the future extra low energy antiproton rings at CERN, an absolute measurement of the beam intensity is essential to monitor the operation efficiency. Superconducting quantum interference device (SQUID) based cryogenic current comparators (CCC) have been used for measuring slow charged beams in the nA range, showing a very good current resolution. But these were unable to measure fast bunched beams, due to the slew-rate limitation of SQUID devices and presented a strong susceptibility to external perturbations. Here, we present a CCC system developed for the AD machine, which was optimised in terms of its current resolution, system stability, ability to cope with short bunched beams, and immunity to mechanical vibrations. This paper presents the monitor design and the first results from measurements with a low energy antiproton beam obtained in the AD in 2015. These are the first CCC beam current measurements ever performed in a synchrotron machine with both coasting and short bunched beams. It is shown that the system is able to stably measure the AD beam throughout the entire cycle, with a current resolution of $30\,\mathrm{nA}$

MHD in von Kármán swirling flows, development and first run of the sodium experiment

URL: http://www-spht.cea.fr/articles/s01/004 MHD dans les écoulements de von Kármán | Collaboration VKSNATO Science Series II 26, 35-50 (2001). NATO Advanced Research Workshop, Dynamo and Dynamics, A Mathematical ChallengeWe describe the motivations, development and first run of the Von Kármán Sodium (VKS) experiment built to study high Reynolds number magnetohydrodynamics and applications to the dynamo effect. The flow is optimized using water experiments at scale 1/2 and kinematic dynamo simulations. In VKS run1, induction measurements are made in the presence of an externally applied field. Results are reported concerning the geometry of the induced field and its fluctuations in time

Synthesis of YAP phase by a polymeric method and phase progression mechanisms

Abstract The phase formation kinetics of YAP (YAlO 3 ) synthesized through the polymeric precursor method was investigated by thermal analysis, X-ray diffraction and FT-IR spectroscopy. We demonstrated that the YAP synthesis is highly dependent on the heat and mass transport during all stages of the synthesis route. In the first stages, during the preparation of amorphous precursor, ''hot spots'' need to be suppressed to avoid the occurrence of chemical inhomogeneities. Very high heating rates combined with small amorphous particles are advantageous in the last stage during the formation of crystalline phase. We were able to synthesize nanosized particles of YAP single phase at temperatures around 1100°C for future preparation of phosphors or ceramics for optics

Search for CP Violation in the Decay Z -> b (b bar) g

About three million hadronic decays of the Z collected by ALEPH in the years 1991-1994 are used to search for anomalous CP violation beyond the Standard Model in the decay Z -> b \bar{b} g. The study is performed by analyzing angular correlations between the two quarks and the gluon in three-jet events and by measuring the differential two-jet rate. No signal of CP violation is found. For the combinations of anomalous CP violating couplings, ${\hat{h}}_b = {\hat{h}}_{Ab}g_{Vb}-{\hat{h}}_{Vb}g_{Ab}$ and $h^{\ast}_b = \sqrt{\hat{h}_{Vb}^{2}+\hat{h}_{Ab}^{2}}$, limits of \hat{h}_b < 0.59$and$h^{\ast}_{b} < 3.02$ are given at 95\% CL.Comment: 8 pages, 1 postscript figure, uses here.sty, epsfig.st