Noncontact conductivity and dielectric measurement for high throughput roll-to-roll nanomanufacturing

Advances in roll-to-roll processing of graphene and carbon nanotubes have at last led to the continuous production of high-quality coatings and filaments, ushering in a wave of applications for flexible and wearable electronics, woven fabrics, and wires. These applications often require specific electrical properties, and hence precise control over material micro- and nanostructure. While such control can be achieved, in principle, by closed-loop processing methods, there are relatively few noncontact and nondestructive options for quantifying the electrical properties of materials on a moving web at the speed required in modern nanomanufacturing. Here, we demonstrate a noncontact microwave method for measuring the dielectric constant and conductivity (or geometry for samples of known dielectric properties) of materials in a millisecond. Such measurement times are compatible with current and future industrial needs, enabling real-time materials characterization and in-line control of processing variables without disrupting production

Carbon nanotube-rich domain effects on bulk electrical properties of nanocomposites

Carbon nanotube (CNT)/epoxy composites are intriguing materials that enable materials scientists and engineers to tailor structural and electrical properties for applications in the automotive and aerospace industries. Recent insights into CNT-rich domain formation and its influence on electrical properties raise questions about which processing variables can be used to tune the overall electrical conductivity. Here, we investigate how mass fraction and curing temperature influence these electrical properties. CNT nanocomposites were fabricated varying the mass fraction of CNT and the epoxy curing temperature. First, scanning lithium ion microscopy coupled with transmission electron microscopy were employed to investigate the morphology of CNT-rich domains that formed more readily at elevated curing temperatures than during room temperature curing. Then, oscillatory shear rheology measurements of the unfilled curing epoxy informed a simple kinetic argument to explain the CNT-rich domain formation. Finally, the electrical conductivity (both alternating and direct current) was characterized with a novel microwave cavity perturbation spectroscopy technique (alternating current conductivity) and a standard four-point probe station (direct current conductivity). The overarching conclusion of the work was that the CNT-rich domains formed a secondary percolated network surrounded by an almost completely unfilled epoxy matrix that allowed for higher conductivities at lower loadings. This work demonstrates that perfect dispersion of the nanoparticulate is, at least in this instance, not necessarily the preferred morphology

Relationship Between Dispersion Metric and Properties of PMMA/SWNT Nanocomposites

Particle spatial dispersion is a crucial characteristic of polymer composite materials and this property is recognized as especially important in nanocomposite materials due to the general tendency of nanoparticles to aggregate under processing conditions. We introduce dispersion metrics along with a specified dispersion scale over which material homogeneity is measured and consider how the dispersion metrics correlate quantitatively with the variation of basic nanocomposite properties. We then address the general problem of quantifying nanoparticle spatial dispersion in model nanocomposites of single wall carbon nanotubes (SWNT) dispersed in poly(methyl methacrylate) (PMMA) at a fixed SWNT concentration of 0.5 % using a \u27coagulation\u27 fabrication method. Two methods are utilized to measure dispersion, UV-Vis spectroscopy and optical confocal microscopy. Quantitative spatial dispersion levels were obtained through image analysis to obtain a \u27relative dispersion index\u27 (RDI) representing the uniformity of the dispersion of SWNTs in the samples and through absorbance. We find that the storage modulus, electrical conductivity, and flammability containing the same amount of SWNTs, the relationships between the quantified dispersion levels and physical properties show about four orders of magnitude variation in storage modulus, almost eight orders of magnitude variation in electric conductivity, and about 70 % reduction in peak mass loss rate at the highest dispersion level used in this study. The observation of such a profound effect of SWNT dispersion indicates the need for objective dispersion metrics for correlating and understanding how the properties of nanocomposites are determined by the concentration, shape and size of the nanotubes

The effects of thermal capsulorrhaphy of medial parapatellar capsule on patellar lateral displacement

<p>Abstract</p> <p>Background</p> <p>The effectiveness of thermal shrinkage on the medial parapatellar capsule for treating recurrent patellar dislocation is controversial. One of reasons why it is still controversial is that the effectiveness is still qualitatively measured. The purpose of this study was to quantitatively determine the immediate effectiveness of the medial parapatellar capsule shrinkage as in clinical setting.</p> <p>Methods</p> <p>Nine cadaveric knees were used to collect lateral displacement data before and after medial shrinkage or open surgery. The force and displacement were recorded while a physician pressed the patella from the medial side to mimic the physical exam used in clinic. Ten healthy subjects were used to test the feasibility of the technique on patients and establish normal range of lateral displacement of the patella under a medial force. The force applied, the resulting displacement and the ratio of force over displacement were compared among four data groups (normal knees, cadaveric knees before medial shrinkage, after shrinkage and after open surgery).</p> <p>Results</p> <p>Displacements of the cadaveric knees both before and after thermal modification were similar to normal subjects, and the applied forces were significantly higher. No significant differences were found between before and after thermal modification groups. After open surgery, displacements were reduced significantly while applied forces were significantly higher.</p> <p>Conclusion</p> <p>No immediate difference was found after thermal shrinkage of the medial parapatellar capsule. Open surgery immediately improved of the lateral stiffness of the knee capsule.</p

A Systems Biology Approach to Drug Targets in Pseudomonas aeruginosa Biofilm

Antibiotic resistance is an increasing problem in the health care system and we are in a constant race with evolving bacteria. Biofilm-associated growth is thought to play a key role in bacterial adaptability and antibiotic resistance. We employed a systems biology approach to identify candidate drug targets for biofilm-associated bacteria by imitating specific microenvironments found in microbial communities associated with biofilm formation. A previously reconstructed metabolic model of Pseudomonas aeruginosa (PA) was used to study the effect of gene deletion on bacterial growth in planktonic and biofilm-like environmental conditions. A set of 26 genes essential in both conditions was identified. Moreover, these genes have no homology with any human gene. While none of these genes were essential in only one of the conditions, we found condition-dependent genes, which could be used to slow growth specifically in biofilm-associated PA. Furthermore, we performed a double gene deletion study and obtained 17 combinations consisting of 21 different genes, which were conditionally essential. While most of the difference in double essential gene sets could be explained by different medium composition found in biofilm-like and planktonic conditions, we observed a clear effect of changes in oxygen availability on the growth performance. Eight gene pairs were found to be synthetic lethal in oxygen-limited conditions. These gene sets may serve as novel metabolic drug targets to combat particularly biofilm-associated PA. Taken together, this study demonstrates that metabolic modeling of human pathogens can be used to identify oxygen-sensitive drug targets and thus, that this systems biology approach represents a powerful tool to identify novel candidate antibiotic targets

Assessment of Metabolic Phenotypes in Patients with Non-ischemic Dilated Cardiomyopathy Undergoing Cardiac Resynchronization Therapy

Studies of myocardial metabolism have reported that contractile performance at a given myocardial oxygen consumption (MVO2) can be lower when the heart is oxidizing fatty acids rather than glucose or lactate. The objective of this study is to assess the prognostic value of myocardial metabolic phenotypes in identifying non-responders among non-ischemic dilated cardiomyopathy (NIDCM) patients undergoing cardiac resynchronization therapy (CRT). Arterial and coronary sinus plasma concentrations of oxygen, glucose, lactate, pyruvate, free fatty acids (FFA), and 22 amino acids were obtained from 19 male and 2 female patients (mean age 56 ± 16) with NIDCM undergoing CRT. Metabolite fluxes/MVO2 and extraction fractions were calculated. Flux balance analysis (FBA) was performed with MetaFluxNet 1.8 on a metabolic network of the cardiac mitochondria (189 reactions, 230 metabolites) reconstructed from mitochondrial proteomic data (615 proteins) from human heart tissue. Non-responders based on left ventricular ejection fraction (LVEF) demonstrated a greater mean FFA extraction fraction (35% ± 17%) than responders [18 ± 10%, p = 0.0098, area under the estimated ROC curve (AUC) was 0.8238, S.E. 0.1115]. Calculated adenosine triphosphate (ATP)/MVO2 using FBA correlated with change in New York Heart Association (NYHA) class (rho = 0.63, p = 0.0298; AUC = 0.8381, S.E. 0.1316). Non-responders based on both LVEF and NYHA demonstrated a greater mean FFA uptake/MVO2 (0.115 ± 0.112) than responders (0.034 ± 0.030, p = 0.0171; AUC = 0.8593, S.E. 0.0965). Myocardial FFA flux and calculated maximal ATP synthesis flux using FBA may be helpful as biomarkers in identifying non-responders among NIDCM patients undergoing CRT

Epidemiology and Treatment Guidelines of Negative Symptoms in Schizo-phrenia in Central and Eastern Europe: A Literature Review

AIM: To gather and review data describing the epidemiology of schizophrenia and clinical guidelines for schizophrenia therapy in seven Central and Eastern European countries, with a focus on negative symptoms. Methods : A literature search was conducted which included publications from 1995 to 2012 that were indexed in key databases. Results : Reports of mean annual incidence of schizophrenia varied greatly, from 0.04 to 0.58 per 1,000 population. Lifetime prevalence varied from 0.4% to 1.4%. One study reported that at least one negative symptom was present in 57.6% of patients with schizophrenia and in 50-90% of individuals experiencing their first episode of schizophrenia. Primary negative symptoms were observed in 10-30% of patients. Mortality in patients with schizophrenia was greater than in the general population, with a standardized mortality ratio of 2.58-4.30. Reasons for higher risk of mortality in the schizophrenia population included increased suicide risk, effect of schizophrenia on lifestyle and environment, and presence of comorbidities. Clinical guidelines overall supported the use of second-generation antipsychotics in managing negative symptoms of schizophrenia, although improved therapeutic approaches are needed. Conclusion : Schizophrenia is one of the most common mental illnesses and poses a considerable burden on patients and healthcare resources alike. Negative symptoms are present in many patients and there is an unmet need to improve treatment offerings for negative symptoms beyond the use of second-generation antipsychotics and overall patient outcomes

Structural Stability of Transparent Conducting Films Assembled from Length Purified Single-Wall Carbon Nanotubes

Single-wall carbon nanotube (SWCNT) films show significant promise for transparent electronics applications that demand mechanical flexibility, but durability remains an outstanding issue. In this work, thin membranes of length purified single-wall carbon nanotubes (SWCNTs) are uniaxially and isotropically compressed by depositing them on prestrained polymer substrates. Upon release of the strain, the topography, microstructure, and conductivity of the films are characterized using a combination of optical/fluorescence microscopy, light scattering, force microscopy, electron microscopy, and impedance spectroscopy. Above a critical surface mass density, films assembled from nanotubes of well-defined length exhibit a strongly nonlinear mechanical response. The measured strain dependence reveals a dramatic softening that occurs through an alignment of the SWCNTs normal to the direction of prestrain, which at small strains is also apparent as an anisotropic increase in sheet resistance along the same direction. At higher strains, the membrane conductivities increase due to a compression-induced restoration of conductive pathways. Our measurements reveal the fundamental mode of elasto-plastic deformation in these films and suggest how it might be suppressed

A cross-cultural comparison of verbal learning and memory functions in reading disabled American and Norwegian adolescents

The present study reports the results of a cross-cultural analysis of the role of phonetic and semantic cues in verbal learning and memory. A newly developed memory test procedure, the Bergen-Tucson Verbal Learning Test (BTVLT), expands earlier test procedures as phonetic cues are applied in addition to semantic cues in a cued recall procedure. Samples of reading disabled and typically developed adolescents from the US and from Norway were recruited as voluntary participants. The results indicate that the stimulus materials chosen for the memory test are working well in both American and in Norwegian samples, yielding acquisition results comparable to similar list learning procedures, and also yielding high internal consistency across learning trials. The procedure also reliably differentiates between reading disabled samples in both languages, and also yields cross-cultural differences that seem to reflect differences in transparency and differences in the orthography of the included languages. The BTVLT with its focus on phonetic coding is a promising supplement to established tests of verbal memory for assessment of reading and language impaired individuals

Polish aspects in the modern design solutions of steam turbine flow systems

This paper presents new solutions of turbine stages which have been applied to high-power steam turbine flow systems. The structures, elaborated in Poland, were designed with the use of the authors’ original computational software and verified by measurements performed on real turbine sets