89 research outputs found
Effect of Liquid Salt Bath Nitrocarburizing on Mechanical Properties of Low-Alloy Sintered Steels
The purpose of this study is to produce Fe–2Cu–2Ni–0.7Mo–XC steels by means of the powder metallurgy at different sintering temperatures. The mechanical properties of sintered steels have recently reached a level equivalent to that of steels produced by other processes. The static and dynamic mechanical properties of parts made of sintered steel depend on density and microstructure. Many process parameters such as initial composition, alloying elements, atmosphere, time, sintering temperature, and nitrocarburizing influence the microstructure of steel parts. The compacts’ preparation involves powder mixing, cold pressing at 500 MPa, and sintering at 1250°C within the H2 atmosphere for 2 hours and 25 min. The influence of sintering temperature on both hardness and microstructure of the steel is investigated. In this study, sintered Fe–2Cu–2Ni–0.7Mo–XC-type steels are developed. The impact of nitrocarburizing on this structure is evaluated. Microscopy, SEM, and destructive testing are used for characterization of the sintered steels.Метою даної роботи є одержання сталей типу Fe–2Cu–2Ni–0,7Mo–XC методами порошкової металурґії за різних температур спікання. Механічні властивості спечених сталей нещодавно сягнули рівня, аналогічного рівню сталей, що виробляються іншими методами. Статичні та динамічні механічні властивості деталів із спеченої сталі визначаються густиною та мікроструктурою. При цьому велика кількість характеристик процесу, наприклад, вихідний склад, леґувальні елементи, атмосфера, час, температура спікання та нітроцементація впливають на мікроструктуру сталевих деталів. Виготовлення пресованого матеріялу потребує змішування порошку, холодного пресування при 500 МПа та спікання при температурі у 1250°C в атмосфері Н22 протягом 2 годин 25 хв. Було досліджено вплив температури спікання на твердість і мікроструктуру сталі. В даній роботі було розглянуто сталі типу Fe–2Cu–2Ni–0,7Mo–XC. Було проведено оцінку впливу нітроцементації на такі структури. Для характеризації спечених сталей використовувалися мікроскопія, СЕМ та випробування на руйнування.Целью данной работы является получение сталей типа Fe–2Cu–2Ni–0,7Mo–XC методами порошковой металлургии при различных температурах спекания. Механические свойства спечённых сталей недавно достигли уровня, аналогичного уровню сталей, производимых другими методами. Статические и динамические механические свойства деталей из спечённой стали определяются плотностью и микроструктурой. При этом большое количество характеристик процесса, например, исходный состав, легирующие элементы, атмосфера, время, температура спекания и нитроцементация, влияют на микроструктуру стальных деталей. Изготовление прессованного материала требует смешивания порошка, холодного прессования при 500 МПа и спекания при температуре 1250°C в атмосфере Н22 в течение 2 часов 25 мин. Было исследовано влияние температуры спекания на твёрдость и микроструктуру стали. В данной работе были рассмотрены стали типа Fe–2Cu–2Ni–0,7Mo–XC. Была проведена оценка влияния нитроцементации на такие структуры. Для характеризации спечённых сталей использовались микроскопия, СЭМ и испытания на разрушение
513 DEGENERATION OF INTERVERTEBRAL DISC: CORRELATION BETWEEN MRI HISTOLOGICAL AND TRANSCRIPTS ANALYSIS
An Inverse Method to Obtain Porosity, Fibre Diameterand Density of Fibrous Sound Absorbing Materials
Characterization of sound absorbing materials is essential to predict its acoustic behaviour. The most commonly used models to do so consider the flow resistivity, porosity, and average fibre diameter as parameters to determine the acoustic impedance and sound absorbing coefficient. Besides direct experimental techniques, numerical approaches appear to be an alternative to estimate the material's parameters. In this work an inverse numerical method to obtain some parameters of a fibrous material is presented. Using measurements of the normal incidence sound absorption coefficient and then using the model proposed by Voronina, subsequent application of basic minimization techniques allows one to obtain the porosity, average fibre diameter and density of a sound absorbing material. The numerical results agree fairly well with the experimental data.This work has been supported by the Ministerio de Educacion y Ciencia-D.G. Investigacion (BIA2007-68098-C02-01 and BIA2007-68098-C02-02) and also from the Spanish Ministry of Foreign Affairs and Cooperation through the Inter-University and Scientific Research Cooperation Program (A/023748/09).Alba Fernández, J.; Rey Tormos, RMD.; Ramis Soriano, J.; Arenas, JP. (2011). An Inverse Method to Obtain Porosity, Fibre Diameterand Density of Fibrous Sound Absorbing Materials. Archives of Acoustics. 36(3):561-574. https://doi.org/10.2478/v10168-011-0040-xS561574363Allard, J., & Champoux, Y. (1992). New empirical equations for sound propagation in rigid frame fibrous materials. The Journal of the Acoustical Society of America, 91(6), 3346-3353. doi:10.1121/1.402824Attenborough, K. (1983). Acoustical characteristics of rigid fibrous absorbents and granular materials. The Journal of the Acoustical Society of America, 73(3), 785-799. doi:10.1121/1.389045Bies, D. A., & Hansen, C. H. (1980). Flow resistance information for acoustical design. Applied Acoustics, 13(5), 357-391. doi:10.1016/0003-682x(80)90002-xChampoux, Y., Stinson, M. R., & Daigle, G. A. (1991). Air‐based system for the measurement of porosity. The Journal of the Acoustical Society of America, 89(2), 910-916. doi:10.1121/1.1894653Crocker, M. J., & Arenas, J. P. (s. f.). Use of Sound-Absorbing Materials. Handbook of Noise and Vibration Control, 696-713. doi:10.1002/9780470209707.ch57Delany, M. E., & Bazley, E. N. (1970). Acoustical properties of fibrous absorbent materials. Applied Acoustics, 3(2), 105-116. doi:10.1016/0003-682x(70)90031-9Dunn, I. P., & Davern, W. A. (1986). Calculation of acoustic impedance of multi-layer absorbers. Applied Acoustics, 19(5), 321-334. doi:10.1016/0003-682x(86)90044-7Fellah, Z. E. A., Berger, S., Lauriks, W., Depollier, C., Aristégui, C., & Chapelon, J.-Y. (2003). Measuring the porosity and the tortuosity of porous materials via reflected waves at oblique incidence. The Journal of the Acoustical Society of America, 113(5), 2424-2433. doi:10.1121/1.1567275Fellah, Z. E. A., Berger, S., Lauriks, W., Depollier, C., & Fellah, M. (2003). Measuring the porosity of porous materials having a rigid frame via reflected waves: A time domain analysis with fractional derivatives. Journal of Applied Physics, 93(1), 296-303. doi:10.1063/1.1524025Fellah, Z. E. A., Berger, S., Lauriks, W., Depollier, C., Trompette, P., & Chapelon, J. Y. (2003). Ultrasonic measurement of the porosity and tortuosity of air-saturated random packings of beads. Journal of Applied Physics, 93(11), 9352-9359. doi:10.1063/1.1572191Fellah, Z. E. A., Mitri, F. G., Fellah, M., Ogam, E., & Depollier, C. (2007). Ultrasonic characterization of porous absorbing materials: Inverse problem. Journal of Sound and Vibration, 302(4-5), 746-759. doi:10.1016/j.jsv.2006.12.007Garai, M., & Pompoli, F. (2005). A simple empirical model of polyester fibre materials for acoustical applications. Applied Acoustics, 66(12), 1383-1398. doi:10.1016/j.apacoust.2005.04.008ISO (1998), 10534-2:1998. Acoustics - determination of sound absorption coefficient and impedance in impedance tubes - Part 2: transfer-function method, International Organization for Standardization, Geneva.Miki, Y. (1990). Acoustical properties of porous materials. Modifications of Delany-Bazley models. Journal of the Acoustical Society of Japan (E), 11(1), 19-24. doi:10.1250/ast.11.19Miki, Y. (1990). Acoustical properties of porous materials. Generalizations of empirical models. Journal of the Acoustical Society of Japan (E), 11(1), 25-28. doi:10.1250/ast.11.25Ramis, J., Alba, J., Del Rey, R., Escuder, E., & Sanchís, V. J. (2010). Nuevos materiales absorbentes acústicos basados en fibra de kenaf. Materiales de Construcción, 60(299), 133-143. doi:10.3989/mc.2010.50809Shoshani, Y., & Yakubov, Y. (2000). Numerical assessment of maximal absorption coefficients for nonwoven fiberwebs. Applied Acoustics, 59(1), 77-87. doi:10.1016/s0003-682x(99)00015-8Umnova, O., Attenborough, K., Shin, H.-C., & Cummings, A. (2005). Deduction of tortuosity and porosity from acoustic reflection and transmission measurements on thick samples of rigid-porous materials. Applied Acoustics, 66(6), 607-624. doi:10.1016/j.apacoust.2004.02.005Voronina, N. (1994). Acoustic properties of fibrous materials. Applied Acoustics, 42(2), 165-174. doi:10.1016/0003-682x(94)90005-1Voronina, N. (1996). Improved empirical model of sound propagation through a fibrous material. Applied Acoustics, 48(2), 121-132. doi:10.1016/0003-682x(95)00055-eVoronina, N. (1998). An empirical model for elastic porous materials. Applied Acoustics, 55(1), 67-83. doi:10.1016/s0003-682x(97)00098-4Voronina, N. (1999). An empirical model for rigid-frame porous materials with low porosity. Applied Acoustics, 58(3), 295-304. doi:10.1016/s0003-682x(98)00076-0Voronina, N. ., & Horoshenkov, K. . (2003). A new empirical model for the acoustic properties of loose granular media. Applied Acoustics, 64(4), 415-432. doi:10.1016/s0003-682x(02)00105-6Wang, X., Eisenbrey, J., Zeitz, M., & Sun, J. Q. (2004). Multi-stage regression analysis of acoustical properties of polyurethane foams. Journal of Sound and Vibration, 273(4-5), 1109-1117. doi:10.1016/j.jsv.2003.09.039Wilson, D. K. (1997). Simple, relaxational models for the acoustical properties of porous media. Applied Acoustics, 50(3), 171-188. doi:10.1016/s0003-682x(96)00048-
The progress of early phase bone healing using porous granules produced from calcium phosphate cement
<p>Abstract</p> <p>Objective</p> <p>Bone grafting is a vital component in many surgical procedures to facilitate the repair of bone defects or fusions. Autologous bone has been the gold standard to date in spite of associated donor-site morbidity and the limited amount of available donor bone. The aim of this study was to investigate the progress of bone regeneration and material degradation of calcium phosphate granules (CPG) produced from a calcium phosphate self-setting cement powder compared to the use of autologous bone grafting in the treatment of "critical size defects" on load-bearing long bones of minipigs.</p> <p>Methods</p> <p>A critical size defect in the tibial metaphysis of 16 mini-pigs was filled either with autologous cancellous graft or with micro- and macroporous carbonated, apatic calcium phosphate granules (CPG) produced from a calcium phosphate self-setting cement powder. After 6 weeks, the specimens were assessed by X-ray and histological evaluation. The amount of new bone formation was analysed histomorphometrically.</p> <p>Results</p> <p>The semi-quantitative analysis of the radiological results showed a complete osseous bridging of the defect in three cases for the autograft group. In the same group five animals showed a beginning, but still incomplete bridging of the defect, whereas in the CPG group just two animals developed this. All other animals of the CPG group showed only a still discontinuous new bone formation. Altogether, radiologically a better osseous bridging was observed in the autograft group compared to the CPG group.</p> <p>Histomorphometrical analysis after six weeks of healing revealed that the area of new bone was significantly greater in the autograft group concerning the central area of the defect zone (p < 0.001) as well as the cortical defect zone (p < 0.002). All defects showed new bone formation, but only in the autograft group defects regenerated entirely</p> <p>Conclusions</p> <p>Within the limits of the present study it could be demonstrated that autologous cancellous grafts lead to a significantly better bone regeneration compared to the application of calcium phosphate granules (CPG) produced from a calcium phosphate self-setting cement powder after 6 weeks. In the early phase of bone-healing, the sole application of CPG appears to be inferior to the autologous cancellous grafts in an <it>in vivo </it>critical size defect on load-bearing long bones of mini-pigs.</p
Strontium doping of bone graft extender: Effect on fixation of allografted experimental implants
Thermoeconomic and thermoenvironomic modeling and analysis of selected gas turbine power plants in Nigeria
This study presents comprehensive thermoeconomic and thermoenvironomic
modeling and analysis of selected gas turbine power plants in Nigeria using the
first and second laws of thermodynamics (exergy) concept. Exergetic analysis
was conducted using operating data obtained from the power plants to determine
the exergy destruction and exergy efficiency of each major component of the
gas turbine in each power plant. The results of the study showed that the combustion
chamber (CC) is the most exergy destructive component compared to
other cycle components. The percentage of exergy destruction in CC varies between
86.05% and 94.6%. By increasing the gas turbine inlet temperature (GTIT),
the exergy destruction of this component can be reduced. The total exergy improvement
potential of the selected plants varies from 54.04 to 159.88 MW. The
component with the highest exergy improvement potential is the CC, which has
the value that varies from 30.21 to 88.86 MW. Thermoeconomic analysis showed
that the cost of exergy destruction is high in the CC, and an increase in the
GTIT effectively decreases this cost. The exergy costing analysis revealed that the
unit cost of electricity produced in the plants ranged from cents 1.99/kWh (N3.16/
kWh) to cents 5.65 /kWh (N8.98/kWh). Thermoenvironomic analysis showed
that the CO2 emissions varied between 100.18 and 408.78 kg CO2/MWh, while
cost rate of environmental impact varied from 40.18 /h (44, 038. 23 N/h). The results further showed that CO2 emissions
and cost of environmental impact decrease with increasing GTIT. The sustainability
index increase with increasing GTIT. Finally, this study will assist efforts
to understand the thermodynamic losses in the gas turbine cycle, and to improve
efficiency as well as provide future recommendations for better performance,
sustainability, and lessening environmental impact of power plant
SHINE Transcription Factors Act Redundantly to Pattern the Archetypal Surface of Arabidopsis Flower Organs
Floral organs display tremendous variation in their exterior that is essential for organogenesis and the interaction with the environment. This diversity in surface characteristics is largely dependent on the composition and structure of their coating cuticular layer. To date, mechanisms of flower organ initiation and identity have been studied extensively, while little is known regarding the regulation of flower organs surface formation, cuticle composition, and its developmental significance. Using a synthetic microRNA approach to simultaneously silence the three SHINE (SHN) clade members, we revealed that these transcription factors act redundantly to shape the surface and morphology of Arabidopsis flowers. It appears that SHNs regulate floral organs' epidermal cell elongation and decoration with nanoridges, particularly in petals. Reduced activity of SHN transcription factors results in floral organs' fusion and earlier abscission that is accompanied by a decrease in cutin load and modified cell wall properties. SHN transcription factors possess target genes within four cutin- and suberin-associated protein families including, CYP86A cytochrome P450s, fatty acyl-CoA reductases, GSDL-motif lipases, and BODYGUARD1-like proteins. The results suggest that alongside controlling cuticular lipids metabolism, SHNs act to modify the epidermis cell wall through altering pectin metabolism and structural proteins. We also provide evidence that surface formation in petals and other floral organs during their growth and elongation or in abscission and dehiscence through SHNs is partially mediated by gibberellin and the DELLA signaling cascade. This study therefore demonstrates the need for a defined composition and structure of the cuticle and cell wall in order to form the archetypal features of floral organs surfaces and control their cell-to-cell separation processes. Furthermore, it will promote future investigation into the relation between the regulation of organ surface patterning and the broader control of flower development and biological functions
Trace elements in hemodialysis patients: a systematic review and meta-analysis
<p>Abstract</p> <p>Background</p> <p>Hemodialysis patients are at risk for deficiency of essential trace elements and excess of toxic trace elements, both of which can affect health. We conducted a systematic review to summarize existing literature on trace element status in hemodialysis patients.</p> <p>Methods</p> <p>All studies which reported relevant data for chronic hemodialysis patients and a healthy control population were eligible, regardless of language or publication status. We included studies which measured at least one of the following elements in whole blood, serum, or plasma: antimony, arsenic, boron, cadmium, chromium, cobalt, copper, fluorine, iodine, lead, manganese, mercury, molybdenum, nickel, selenium, tellurium, thallium, vanadium, and zinc. We calculated differences between hemodialysis patients and controls using the differences in mean trace element level, divided by the pooled standard deviation.</p> <p>Results</p> <p>We identified 128 eligible studies. Available data suggested that levels of cadmium, chromium, copper, lead, and vanadium were higher and that levels of selenium, zinc and manganese were lower in hemodialysis patients, compared with controls. Pooled standard mean differences exceeded 0.8 standard deviation units (a large difference) higher than controls for cadmium, chromium, vanadium, and lower than controls for selenium, zinc, and manganese. No studies reported data on antimony, iodine, tellurium, and thallium concentrations.</p> <p>Conclusion</p> <p>Average blood levels of biologically important trace elements were substantially different in hemodialysis patients, compared with healthy controls. Since both deficiency and excess of trace elements are potentially harmful yet amenable to therapy, the hypothesis that trace element status influences the risk of adverse clinical outcomes is worthy of investigation.</p
Bone regeneration in calvarial defects in a rat model by implantation of human bone marrow-derived mesenchymal stromal cell spheroids
- …