102 research outputs found
Impact of activation cross-section uncertainties on the tritium production in the HFTM specimen cells
The prediction of the tritium production is required for handling procedures of samples, safety & maintenance and licensing of the International Fusion Materials Irradiation Facility (IFMIF). A comparison of the evaluated tritium production cross-sections with available experimental data from the EXFOR data base has shown insufficient validation. And significant discrepancies in evaluated cross-section libraries, including lack of tritium production reactions for some important elements, were found.
Here, we have addressed an uncertainty analysis to draw conclusions on the reliability of the tritium prediction under the potential impact of activation cross-section uncertainties. We conclude that there is not sufficient experimental validation of the evaluated tritium production cross-sections, especially for iron and sodium. Therefore a dedicated experimental validation program for those elements should be desirable
Methodologies for an improved prediction of the isotopic content in high burnup samples. Application to Vandellos-II reactor core
Fuel cycles are designed with the aim of obtaining the highest amount of energy possible. Since higher burnup values are reached, it is necessary to improve our disposal designs, traditionally based on the conservative assumption that they contain fresh fuel. The criticality calculations involved must consider burnup by making the most of the experimental and computational capabilities developed, respectively, to measure and predict the isotopic content of the spent nuclear fuel. These high burnup scenarios encourage a review of the computational tools to find out possible weaknesses in the nuclear data libraries, in the methodologies applied and their applicability range. Experimental measurements of the spent nuclear fuel provide the perfect framework to benchmark the most well-known and established codes, both in the industry and academic research activity.
For the present paper, SCALE 6.0/TRITON and MONTEBURNS 2.0 have been chosen to follow the isotopic content of four samples irradiated in the Spanish Vandellós-II pressurized water reactor up to burnup values ranging from 40 GWd/MTU to 75 GWd/MTU. By comparison with the experimental data reported for these samples, we can probe the applicability of these codes to deal with high burnup problems. We have developed new computational tools within MONTENBURNS 2.0. They make possible to handle an irradiation history that includes geometrical and positional changes of the samples within the reactor core. This paper describes the irradiation scenario against which the mentioned codes and our capabilities are to be benchmarked
Analysis of Different Uncertainty Activation Cross Section Data Libraries for LWR, ads and demo Neutron Spectra
This work is aimed to present the main differences of nuclear data uncertainties among three different nuclear data libraries: EAF-2007, EAF-2010 and SCALE-6.0, under different neutron spectra: LWR, ADS and DEMO (fusion
Monte Carlo uncertainty propagation approaches in ADS burn-up calculations
In activation calculations, there are several approaches to quantify uncertainties: deterministic by means of sensitivity analysis, and stochastic by means of Monte Carlo. Here, two different Monte Carlo approaches for nuclear data uncertainty are presented: the first one is the Total Monte Carlo (TMC). The second one is by means of a Monte Carlo sampling of the covariance information included in the nuclear data libraries to propagate these uncertainties throughout the activation calculations. This last approach is what we named Covariance Uncertainty Propagation, CUP.
This work presents both approaches and their differences. Also, they are compared by means of an activation calculation, where the cross-section uncertainties of 239Pu and 241Pu are propagated in an ADS activation calculation
Assessment of fissionable material behaviour in fission chambers
A comprehensive study is performed in order to assess the pertinence of fission chambers coated with different fissile materials for high neutron flux detection. Three neutron scenarios are proposed to study the fast component of a high neutron flux: (i) high neutron flux with a significant thermal contribution such as BR2, (ii) DEMO magnetic fusion reactor, and (iii) IFMIF high flux test module.
In this study, the inventory code ACAB is used to analyze the following questions: (i) impact of different deposits in fission chambers; (ii) effect of the irradiation time/burn-up on the concentration; (iii) impact of activation cross-section uncertainties on the composition of the deposit for all the range of burn-up/irradiation neutron fluences of interest. The complete set of nuclear data (decay, fission yield, activation cross-sections, and uncertainties) provided in the EAF2007 data library are used for this evaluation
Nuclear data requirements for the ADS conceptual design EFIT: Uncertainty and sensitivity study
In this paper, we assess the impact of activation cross-section uncertainties on relevant fuel cycle parameters for a conceptual design of a modular European Facility for Industrial Transmutation (EFIT) with a “double strata” fuel cycle. Next, the nuclear data requirements are evaluated so that the parameters can meet the assigned design target accuracies. Different discharge burn-up levels are considered: a low burn-up, corresponding to the equilibrium cycle, and a high burn-up level, simulating the effects on the fuel of the multi-recycling scenario.
In order to perform this study, we propose a methodology in two steps. Firstly, we compute the uncertainties on the system parameters by using a Monte Carlo simulation, as it is considered the most reliable approach to address this problem. Secondly, the analysis of the results is performed by a sensitivity technique, in order to identify the relevant reaction channels and prioritize the data improvement needs. Cross-section uncertainties are taken from the EAF-2007/UN library since it includes data for all the actinides potentially present in the irradiated fuel.
Relevant uncertainties in some of the fuel cycle parameters have been obtained, and we conclude with recommendations for future nuclear data measurement programs, beyond the specific results obtained with the present nuclear data files and the limited available covariance information. A comparison with the uncertainty and accuracy analysis recently published by the WPEC-Subgroup26 of the OECD using BOLNA covariance matrices is performed. Despite the differences in the transmuter reactor used for the analysis, some conclusions obtained by Subgroup26 are qualitatively corroborated, and improvements for additional cross sections are suggested
Recommended from our members
Transmutation analysis of realistic low-activation steels for magnetic fusion reactors and IFMIF
A comprehensive transmutation study for steels considered in the selection of structural materials for magnetic and inertial fusion reactors has been performed in the IFMIF neutron irradiation scenario, as well as in the ITER and DEMO ones for comparison purposes. An element-by-element transmutation approach is used in the study, addressing the generation of: (1) H and He and (2) solid transmutants. The IEAF-2001 activation library and the activation code ACAB were applied to the IFMIF transmutation analysis, after proving the applicability of ACAB for transmutation calculations of this kind of intermediate energy systems
Recommendations for MYRRHA relevant cross section data to the JEFF project
Within the framework of Work Package 10 of the EC FP7 CHANDA project, nuclear data of importance for the operation of MYRRHA, a lead-bismuth cooled accelerator driven reactor under development at SCK•CEN (BE), were studied. Based on data in the main nuclear data libraries, i.e. JEFF, JENDL, ENDF/B and BROND, and in the TENDL and CIELO libraries and on experimental data reported in the literature, recommendations to the JEFF project were made for several nuclides of interest to the MYRRHA reactor.JRC.G.2-Standards for Nuclear Safety, Security and Safeguard
Status of evaluated data files for 238U in the resonance region
Experimental data and evaluated data libraries related to neutron induced reaction cross sections for 238U in the resonance region are reviewed. Based on this review a set of test files is produced to study systematic effects such as the impact of the upper boundary of the resolved resonance region (RRR) and the representation of the infinite diluted capture and in-elastic cross section in the unresolved resonance region (URR). A set of Benchmark experiments was selected and used to verify the test files. Based on these studies recommendations to perform a new evaluation have been defined.
This report has been prepared in support to the CIELO (Collaborative International Evaluated Library Organisation) project. The objective of this project is the creation of a world-wide recognised nuclear data file with a focus on six nuclides, i.e. 1H, 16O, 56Fe, 235U, 238U and 239Pu. Within the CIELO project, the Joint Research Centre (JRC) at Geel (B) is in charge of the production of an evaluated cross section data file for neutron induced reaction of 238U in the resonance region.JRC.D.4-Standards for Nuclear Safety, Security and Safeguard
- …