5,909 research outputs found
The random phase approximation applied to ice
Standard density functionals without van der Waals interactions yield an
unsatisfactory description of ice phases, specifically, high density phases
occurring under pressure are too unstable compared to the common low density
phase I observed at ambient conditions. Although the description is
improved by using functionals that include van der Waals interactions, the
errors in relative volumes remain sizable. Here we assess the random phase
approximation (RPA) for the correlation energy and compare our results to
experimental data as well as diffusion Monte Carlo data for ice. The RPA yields
a very balanced description for all considered phases, approaching the accuracy
of diffusion Monte Carlo in relative energies and volumes. This opens a route
towards a concise description of molecular water phases on surfaces and in
cavities
Synchrotron radiation study of the relation between structure and strain in polyurethane elastomers
This paper describes a system for the study of the relation between structure and applied strain in thermoplastic polyurethane elastomers using the Australian National Beamline Facility at the Photon Factory, KEK, Tsukuba, Japan. The system uses the sagittal focusing monochromator at beamline 20B to provide a high-intensity focused beam which then falls on the specimen mounted in a miniature tensometer mounted in the unique vacuum diffractometer (BIGDIFF). Imaging plates were used to record simultaneously SAXS and WAXS patterns from the specimen at a particular strain. The change in SAXS and WAXS patterns with loading and unloading was recorded using a ten-plate imaging-plate changer
Recommended from our members
Forecasting Urban Residential Stock Turnover Dynamics using System Dynamics and Bayesian Model Averaging
Knowing the size of the building stock is perhaps the most basic determinant in assessing energy use in buildings. However, official statistics on urban residential stock for many countries are piecemeal at best. Previous studies estimating stock size an
Recommended from our members
Applying Bayesian model averaging to characterise urban residential stock turnover dynamics
Building stock is a key determinant in building energy modelling and policy analysis. However, official statistics on total floor area of urban residential stock in China only exist up to 2006. Previous studies estimating Chinese urban residential stock size and energy use made various questionable methodological assumptions and only produced deterministic results. This paper presents a Bayesian approach to characterise the stock turnover dynamics and estimate stock size uncertainties. Firstly, a probabilistic dynamic model is developed to describe the building aging and demolition process governed by a hazard function specified by a parametric survival model. Secondly, with each of five candidate parametric survival models, the dynamic model is simulated through Markov Chain Monte Carlo (MCMC) to obtain posterior distributions of model-specific parameters, estimate marginal likelihood, and make predictions on stock size. Finally, Bayesian Model Averaging (BMA) is applied to create a model ensemble that combines the model-specific posterior predictive distributions of the stock evolution pathway in proportion to posterior model probabilities. This Bayesian modelling framework, and its results in the form of probability distributions of annual total stock and age-specific substocks, can provide a solid basis for further modelling and analysis of policy trade-offs across embodied-versus-operational energy consumption and carbon emissions of buildings in the context of sectorwide transition towards decarbonising buildings
Deriving genetic programming fitness properties by static analysis
Deriving Genetic Programming Fitness Properties by Static Analysis Colin G. Johnson The aim of this paper is to introduce the idea of using static analysis of computer programs as a way of measuring fitness in genetic programming. Such techniques extract information about the programs without explicitly running them, and in particular they infer properties which hold across the whole of the input space of a program. This can be applied to measure fitness, and has a number of advantages over measuring fitness by running members of the population on test cases. The most important advantage is that if a solution is found then it is possible to formally trust that solution to be correct across all inputs. This paper introduces these ideas, discusses various ways in which they could be applied, discusses the type of problems for which they are appropriate, and ends by giving a simple test example and some questions for future research
Epidemiological associations between brachycephaly and upper respiratory tract disorders in dogs attending veterinary practices in England
Background: Brachycephalic dog breeds are increasingly common. Canine brachycephaly has been associated with upper respiratory tract (URT) disorders but reliable prevalence data remain lacking. Using primary-care veterinary clinical data, this study aimed to report the prevalence and breed-type risk factors for URT disorders in dogs. Results: The sampling frame included 170,812 dogs attending 96 primary-care veterinary clinics participating within the VetCompass Programme. Two hundred dogs were randomly selected from each of three extreme brachycephalic breed types (Bulldog, French Bulldog and Pug) and three common small-to medium sized breed types (moderate brachycephalic: Yorkshire Terrier and non-brachycephalic: Border Terrier and West Highland White Terrier). Information on all URT disorders recorded was extracted from individual patient records. Disorder prevalence was compared between groups using the chi-squared test or Fisher’s test, as appropriate. Risk factor analysis used multivariable logistic regression modelling. During the study, 83 (6.9 %) study dogs died. Extreme brachycephalic dogs (median longevity: 8.6 years, IQR: 2.4-10.8) were significantly younger at death than the moderate and non-brachycephalic group of dogs (median 12.7 years, IQR 11.1-15.0) (P \u3c 0.001). A higher proportion of deaths in extreme brachycephalic breed types were associated with URT disorders (4/24 deaths, 16.7 %) compared with the moderate and non-brachycephalic group (0/59 deaths, 0.0 %) (P = 0.001). The prevalence of having at least one URT disorder in the extreme brachycephalic group was higher (22.0 %, 95 % confidence interval (CI): 18.0-26.0) than in the moderate and non-brachycephalic group (9.7 %, 95 % CI: 7.1-12.3, P \u3c 0.001). The prevalence of URT disorders varied significantly by breed type: Bulldogs 19.5 %, French Bulldogs 20.0 %, Pugs 26.5 %, Border Terriers 9.0 %, West Highland White Terriers 7.0 % and Yorkshire Terriers 13.0 % (P \u3c 0.001). After accounting for the effects of age, bodyweight, sex, neutering and insurance, extreme brachycephalic dogs had 3.5 times (95 % CI: 2.4-5.0, P \u3c 0.001) the odds of at least one URT disorder compared with the moderate and non-brachycephalic group. Conclusions: In summary, this study reports that URT disorders are commonly diagnosed in Bulldog, French Bulldog, Pug, Border Terrier, WHWT and Yorkshire Terrier dogs attending primary-care veterinary practices in England. The three extreme brachycephalic breed types (Bulldog, French Bulldog and Pug) were relatively short-lived and predisposed to URT disorders compared with three other small-to-medium size breed types that are commonly owned (moderate brachycephalic Yorkshire Terrier and non-brachycephalic: Border Terrier and WHWT). Conclusions: In summary, this study reports that URT disorders are commonly diagnosed in Bulldog, French Bulldog, Pug, Border Terrier, WHWT and Yorkshire Terrier dogs attending primary-care veterinary practices in England. The three extreme brachycephalic breed types (Bulldog, French Bulldog and Pug) were relatively short-lived and predisposed to URT disorders compared with three other small-to-medium size breed types that are commonly owned (moderate brachycephalic Yorkshire Terrier and non-brachycephalic: Border Terrier and WHWT)
Unravelling the health status of brachycephalic dogs in the UK using multivariable analysis
Brachycephalic dog breeds are regularly asserted as being less healthy than non-brachycephalic breeds. Using primary-care veterinary clinical data, this study aimed to identify predispositions and protections in brachycephalic dogs and explore differing inferences between univariable and multivariable results. All disorders during 2016 were extracted from a random sample of 22,333 dogs within the VetCompass Programme from a sampling frame of 955,554 dogs under UK veterinary care in 2016. Univariable and multivariable binary logistic regression modelling explored brachycephaly as a risk factor for each of a series of common disorders. Brachycephalic dogs were younger, lighter and less likely to be neutered than mesocephalic, dolichocephalic and crossbred dogs. Brachycephalic differed to non-brachycephalic types in their odds for 10/30 (33.33%) common disorders. Of these, brachycephalic types were predisposed for eight disorders and were protected for two disorders. Univariable and multivariable analyses generated differing inference for 11/30 (30.67%) disorders. This study provides strong evidence that brachycephalic breeds are generally less healthy than their non-brachycephalic counterparts. Results from studies that report only univariable methods should be treated with extreme caution due to potential confounding effects that have not been accounted for during univariable study design or analysis
Understanding the impact of bioactive coating materials for human mesenchymal stromal cells and implications for manufacturing
Bioactive materials interact with cells and modulate their characteristics which enable the generation of cell-based products with desired specifications. However, their evaluation and impact are often overlooked when establishing a cell therapy manufacturing process. In this study, we investigated the role of different surfaces for tissue culture including, untreated polystyrene surface, uncoated Cyclic Olefin Polymer (COP) and COP coated with collagen and recombinant fibronectin. It was observed that human mesenchymal stromal cells (hMSCs) expanded on COP-coated plates with different bioactive materials resulted in improved cell growth kinetics compared to traditional polystyrene plates and non-coated COP plates. The doubling time obtained was 2.78 and 3.02 days for hMSC seeded in COP plates coated with collagen type I and recombinant fibronectin respectively, and 4.64 days for cells plated in standard polystyrene treated plates. Metabolite analysis reinforced the findings of the growth kinetic studies, specifically that cells cultured on COP plates coated with collagen I and fibronectin exhibited improved growth as evidenced by a higher lactate production rate (9.38 × 105 and 9.67 × 105 pmol/cell/day, respectively) compared to cells from the polystyrene group (5.86 × 105 pmol/cell/day). This study demonstrated that COP is an effective alternative to polystyrene-treated plates when coated with bioactive materials such as collagen and fibronectin, however COP-treated plates without additional coatings were found not to be sufficient to support cell growth. These findings demonstrate the key role biomaterials play in the cell manufacturing process and the importance of optimising this selection
Tropomyosin 2.1 collaborates with fibronectin to promote TGF-β1-induced contraction of human lung fibroblasts
Many lung diseases are characterized by fibrosis, leading to impaired tissue patency and reduced lung function. Development of fibrotic tissue depends on two-way interaction between the cells and the extra-cellular matrix (ECM). Concentration-dependent increased stiffening of the ECM is sensed by the cells, which in turn increases intracellular contraction and pulling on the matrix causing matrix reorganization and further stiffening. It is generally accepted that the inflammatory cytokine growth factor β1 (TGF-β1) is a major driver of lung fibrosis through the stimulation of ECM production. However, TGF-β1 also regulates the expression of members of the tropomyosin (Tm) family of actin associating proteins that mediate ECM reorganization through intracellular-generated forces. Thus, TGF-β1 may mediate the bi-directional signaling between cells and the ECM that promotes tissue fibrosis. Using combinations of cytokine stimulation, mRNA, protein profiling and cellular contractility assays with human lung fibroblasts, we show that concomitant induction of key Tm isoforms and ECM by TGF-β1, significantly accelerates fibrotic phenotypes. Knocking down Tpm2.1 reduces fibroblast-mediated collagen gel contraction. Collectively, the data suggest combined ECM secretion and actin cytoskeleton contractility primes the tissue for enhanced fibrosis. Our study suggests that Tms are at the nexus of inflammation and tissue stiffening. Small molecules targeting specific Tm isoforms have recently been designed; thus targeting Tpm2.1 may represent a novel therapeutic target in lung fibrosis
Using the stated preference method for the calculation of social discount rate
The aim of this paper is to build the stated preference method into the social discount rate methodology. The first part of the paper presents the results of a survey about stated time preferences through pair-choice decision situations for various topics and time horizons. It is assumed that stated time preferences differ from calculated time preferences and that the extent of stated rates depends on the time period, and on how much respondents are financially and emotionally involved in the transactions. A significant question remains: how can the gap between the calculation and the results of surveys be resolved, and how can the real time preferences of individuals be interpreted using a social time preference rate. The second part of the paper estimates the social time preference rate for Hungary using the results of the survey, while paying special attention to the pure time preference component. The results suggest that the current method of calculation of the pure time preference rate does not reflect the real attitudes of individuals towards future generations
- …