Concept study for a high-efficiency nanowire-based thermoelectric

Materials capable of highly efficient, direct thermal-to-electric energy conversion would have substantial economic potential. Theory predicts that thermoelectric efficiencies approaching the Carnot limit can be achieved at low temperatures in one-dimensional conductors that contain an energy filter such as a double-barrier resonant tunneling structure. The recent advances in growth techniques suggest that such devices can now be realized in heterostructured, semiconductor nanowires. Here we propose specific structural parameters for InAs/InP nanowires that may allow the experimental observation of near-Carnot efficient thermoelectric energy conversion in a single nanowire at low temperature

Analysis of surface waves generated on subwavelength-structured silver films

Using transmission electron microscopy (TEM) to analyse the physical-chemical surface properties of subwavlength structured silver films and finite-difference time-domain (FDTD) numerical simulations of the optical response of these structures to plane-wave excitation, we report on the origin and nature of the persistent surface waves generated by a single slit-groove motif and recently measured by far-field optical interferometry. The surface analysis shows that the silver films are free of detectable oxide or sulfide contaminants, and the numerical simulations show very good agreement with the results previously reported.Comment: 9 Figure

Efficiency in nanostructured thermionic and thermoelectric devices

Advances in solid-state device design now allow the spectrum of transmitted electrons in thermionic and thermoelectric devices to be engineered in ways that were not previously possible. Here we show that the shape of the electron energy spectrum in these devices has a significant impact on their performance. We distinguish between traditional thermionic devices where electron momentum is filtered in the direction of transport only and a second type, in which the electron filtering occurs according to total electron momentum. Such 'total momentum filtered' kr thermionic devices could potentially be implemented in, for example, quantum dot superlattices. It is shown that whilst total momentum filtered thermionic devices may achieve efficiency equal to the Carnot value, traditional thermionic devices are limited to efficiency below this. Our second main result is that the electronic efficiency of a device is not only improved by reducing the width of the transmission filter as has previously been shown, but also strongly depends on whether the transmission probability rises sharply from zero to full transmission. The benefit of increasing efficiency through a sharply rising transmission probability is that it can be achieved without sacrificing device power, in contrast to the use of a narrow transmission filter which can greatly reduce power. We show that devices which have a sharply-rising transmission probability significantly outperform those which do not and it is shown such transmission probabilities may be achieved with practical single and multibarrier devices. Finally, we comment on the implications of the effect the shape of the electron energy spectrum on the efficiency of thermoelectric devices.Comment: 11 pages, 15 figure

Measuring Temperature Gradients over Nanometer Length Scales

When a quantum dot is subjected to a thermal gradient, the temperature of electrons entering the dot can be determined from the dot's thermocurrent if the conductance spectrum and background temperature are known. We demonstrate this technique by measuring the temperature difference across a 15 nm quantum dot embedded in a nanowire. This technique can be used when the dot's energy states are separated by many kT and will enable future quantitative investigations of electron-phonon interaction, nonlinear thermoelectric effects, and the effciency of thermoelectric energy conversion in quantum dots.Comment: 6 pages, 5 figure

Estimation of Polarized Power Spectra by Gibbs sampling

Earlier papers introduced a method of accurately estimating the angular cosmic microwave background (CMB) temperature power spectrum based on Gibbs sampling. Here we extend this framework to polarized data. All advantages of the Gibbs sampler still apply, and exact analysis of mega-pixel polarized data sets is thus feasible. These advantages may be even more important for polarization measurements than for temperature measurements. While approximate methods can alias power from the larger E-mode spectrum into the weaker B-mode spectrum, the Gibbs sampler (or equivalently, exact likelihood evaluations) allows for a statistically optimal separation of these modes in terms of power spectra. To demonstrate the method, we analyze two simulated data sets: 1) a hypothetical future CMBPol mission, with the focus on B-mode estimation; and 2) a Planck-like mission, to highlight the computational feasibility of the method.Comment: 8 pages, 5 figures. High-resolution version available from http://www.astro.uio.no/~hke/docs/larson_et_al_2006.ps.gz; accepted for publication in Ap

Electron Beam Charging of Insulators with Surface Layer and Leakage Currents

International audienceThe electron beam induced selfconsistent charge transport in layered insulators is described by means of an electron-hole fight-drift model FDM and an iterative computer simulation. Ballistic secondary electrons and holes, their attenuation and drift, as well as their recombination, trapping, and detrapping are included. Thermal and field-enhanced detrapping are described by the Poole-Frenkel effect. Furthermore, an additional surface layer with a modified electric surface conductivity is included which describes the surface leakage currents and will lead to particular charge incorporation at the interface between the surface layer and the bulk substrate

Charge injection instability in perfect insulators

We show that in a macroscopic perfect insulator, charge injection at a field-enhancing defect is associated with an instability of the insulating state or with bistability of the insulating and the charged state. The effect of a nonlinear carrier mobility is emphasized. The formation of the charged state is governed by two different processes with clearly separated time scales. First, due to a fast growth of a charge-injection mode, a localized charge cloud forms near the injecting defect (or contact). Charge injection stops when the field enhancement is screened below criticality. Secondly, the charge slowly redistributes in the bulk. The linear instability mechanism and the final charged steady state are discussed for a simple model and for cylindrical and spherical geometries. The theory explains an experimentally observed increase of the critical electric field with decreasing size of the injecting contact. Numerical results are presented for dc and ac biased insulators.Comment: Revtex, 7pages, 4 ps figure

Electron beam charging of insulators: A self-consistent flight-drift model

International audienceElectron beam irradiation and the self-consistent charge transport in bulk insulating samples are described by means of a new flight-drift model and an iterative computer simulation. Ballistic secondary electron and hole transport is followed by electron and hole drifts, their possible recombination and/or trapping in shallow and deep traps. The trap capture cross sections are the Poole-Frenkel-type temperature and field dependent. As a main result the spatial distributions of currents j(x,t), charges, the field F(x,t) and the potential slope V(x,t) are obtained in a self-consistent procedure as well as the time-dependent secondary electron emission rate sigma(t) and the surface potential V0(t) For bulk insulating samples the time-dependent distributions approach the final stationary state with j(x,t)=const=0 and sigma=1. Especially for low electron beam energies E0=4 keV the incorporation of mainly positive charges can be controlled by the potential VG of a vacuum grid in front of the target surface. For high beam energies E0=10, 20, and 30 keV high negative surface potentials V0=−4, −14, and −24 kV are obtained, respectively. Besides open nonconductive samples also positive ion-covered samples and targets with a conducting and grounded layer (metal or carbon) on the surface have been considered as used in environmental scanning electron microscopy and common SEM in order to prevent charging. Indeed, the potential distributions V(x) are considerably small in magnitude and do not affect the incident electron beam neither by retarding field effects in front of the surface nor within the bulk insulating sample. Thus the spatial scattering and excitation distributions are almost not affected

Off-limb (spicule) DEM distribution from SoHO/SUMER observations

In the present work we derive a Differential Emission Measure (DEM) dis- tribution from a region dominated by spicules. We use spectral data from the Solar Ultraviolet Measurements of Emitted Radiation (SUMER) spectrometer on-board the Solar Heliospheric Observatory (SoHO) covering the entire SUMER wavelength range taken off-limb in the Northern polar coronal hole to construct this DEM distribution using the CHIANTI atomic database. This distribution is then used to study the thermal properties of the emission contributing to the 171 {\AA} channel in the Atmospheric Imaging Assembly (AIA) on-board the Solar Dynamics Observatory (SDO). From our off-limb DEM we found that the radiance in the AIA 171 {\AA} channel is dominated by emission from the Fe ix 171.07 {\AA} line and has sparingly little contribution from other lines. The product of the Fe ix 171.07 {\AA} line contribution function with the off-limb DEM was found to have a maximum at logTmax (K) = 5.8 indicating that during spicule observations the emission in this line comes from plasma at transition region temperatures rather than coronal. For comparison, the same product with a quiet Sun and prominence DEM were found to have a maximum at logT max (K) = 5.9 and logTmax (K) = 5.7, respectively. We point out that the interpretation of data obtained from the AIA 171 {\AA} filter should be done with foreknowledge of the thermal nature of the observed phenomenon. For example, with an off-limb DEM we find that only 3.6% of the plasma is above a million degrees, whereas using a quiet Sun DEM, this contribution rises to 15%.Comment: 12 pages, 6 figures accepted by Solar Physic

Merit, Tenure, and Bureaucratic Behavior: Evidence From a Conjoint Experiment in the Dominican Republic

Bureaucratic behavior in developing countries remains poorly understood. Why do some public servants – yet not others – work hard to deliver public services, misuse state resources, and/or participate in electoral mobilization? A classic answer comes from Weber: bureaucratic structures shift behavior towards integrity, neutrality, and commitment to public service. Our paper conducts the first survey experimental test of the effects of bureaucratic structures. It does so through a conjoint experiment with public servants in the Dominican Republic. Looking at merit examinations and job stability, we find that Weber was right – but only partially. Recruitment by examination curbs corruption and political services by bureaucrats, while enhancing work motivation. Job stability, by contrast, only decreases political services: tenured bureaucrats are less likely to participate in electoral mobilization. Examinations thus enhance the quality of bureaucracy (motivation and lower corruption) and democracy (electoral competition); job stability only enhances the quality of democracy