647 research outputs found
Properties of magnetic nanodots with perpendicular anisotropy
Nanodots with magnetic vortices have many potential applications, such as
magnetic memories (VRAMs) and spin transfer nano-oscillators (STNOs). Adding a
perpendicular anisotropy term to the magnetic energy of the nanodot it becomes
possible to tune the vortex core properties. This can be obtained, e.g., in Co
nanodots by varying the thickness of the Co layer in a Co/Pt stack. Here we
discuss the spin configuration of circular and elliptical nanodots for
different perpendicular anisotropies; we show for nanodisks that micromagnetic
simulations and analytical results agree. Increasing the perpendicular
anisotropy, the vortex core radii increase, the phase diagrams are modified and
new configurations appear; the knowledge of these phase diagrams is relevant
for the choice of optimum nanodot dimensions for applications. MFM measurements
on Co/Pt multilayers confirm the trend of the vortex core diameters with
varying Co layer thicknesses.Comment: 7 pages, 8 figure
Resilient Quantum Computation in Correlated Environments: A Quantum Phase Transition Perspective
We analyze the problem of a quantum computer in a correlated environment
protected from decoherence by QEC using a perturbative renormalization group
approach. The scaling equation obtained reflects the competition between the
dimension of the computer and the scaling dimension of the correlations. For an
irrelevant flow, the error probability is reduced to a stochastic form for long
time and/or large number of qubits; thus, the traditional derivation of the
threshold theorem holds for these error models. In this way, the ``threshold
theorem'' of quantum computing is rephrased as a dimensional criterion.Comment: 4.1 pages, minor correction and an improved discussion of Eqs. (4)
and (14
Implementation of Micromundo@UPorto: an educacional project based on service-learning promoting antimicrobial resistance awareness among university and school students
Implementation of Micromundo@UPorto: a pedagogical project of service-learning for education in microbiology and antimicrobial resistance awareness.
The usefulness of ecotoxicological tools to improve the assessment of water bodies in a climate change reality
This study aimed to analyse the added value of using ecotoxicological tools to complement and improve the assessment of natural water bodies status, in situations of climate change, with a higher frequency of extreme events as floods or droughts. Four water bodies of streams in the Guadiana Basin (Álamos, Amieira, Lucefécit, Zebro) were studied in 2017 and 2018 and classified based on the Water Framework Directive (WFD) parameters: Biological Quality Element - Phytobenthos (diatoms), General chemical and physicochemical elements, Specific pollutants, and Priority Substances. Complementarily, bioassays (including lethal and sublethal parameters) were carried out with organisms of different trophic levels: (i) the bacteria Aliivibrio fischeri; (ii) the microalgae Pseudokirchneriella subcapitata; (iii) the crustaceans Daphnia magna, Thamnocephalus platyurus and Heterocypris incongruens. A classification system with 5 scores was developed, permitting to classify water bodies from non-toxic (EC50 > 100 %; growth and feeding rate > 80 %; blue) to highly toxic (EC50 < 10 %; growth and feeding rate < 10 %; red). The comparison between the classification based on the WFD parameters and on ecotoxicological endpoints showed similar results for 71 % of the samples, and significant positive Pearson correlations were detected between the diatom-based Specific Polluosensitivity Index (SPI) and EC50V.fisheri, the algae growth rate and Shannon diversity index. These results indicate that when the biological quality elements cannot be used (namely under drought or flooding conditions) the application of ecotoxicological bioassays may be a good alternative. Further, when ecotoxicological parameters were included, an increase of worse classifications (Bad and Poor) was observed, revealing an improvement in the sensitivity of the classification, mainly in presence of specific and priority substances. So, the ecotoxicological analysis appears to provide useful information regarding the potential presence of both known and unknown contaminants at concentrations that cause biological effects (even within the WFD limits), in agreement with several authors that have already suggested its use in biomonitoring
Relações hídricas em povoamento de eucalipto com diferentes densidades populacionais.
Em experimento realizado na regiao de Santa Barbara (MG) no periodo de agosto de 1994 a fevereiro de 1995, avaliaram-se a precipitacao pluviometrica interna, a evapotranspiracao da cultura (ETc) e o regime hidrico do solo sob povoamento de Eucalyptus grandis (dos 32 aos 38 meses de idade) com densidades populacionais variando de 500 a 5.000 plantas ha-1. A unidade volumetrica do solo, em uma secao de controle de 0 a 285 cm de profundidade, foi determinado quinzenalmente, por meio de moderacao de neutrons. A interpretacao de agua pelas copas aumentou linearmente com o aumento da populacao de plantas, enquanto a ETc nao foi significativamente influenciada. A unidade do solo tendeu a aumentar com a reducao da populacao de plantas. A umidade do solo em todas as epocas monitoradas nunca apresentou valores inferiores aquele correspondente a agua retida a tensao de 1,5 MPa
A Review of Solar Thermochemical CO2 Splitting Using Ceria-Based Ceramics With Designed Morphologies and Microstructures
This review explores the advances in the synthesis of ceria materials with specific morphologies or porous macro- and microstructures for the solar-driven production of carbon monoxide (CO) from carbon dioxide (CO2). As the demand for renewable energy and fuels continues to grow, there is a great deal of interest in solar thermochemical fuel production (STFP), with the use of concentrated solar light to power the splitting of carbon dioxide. This can be achieved in a two-step cycle, involving the reduction of CeO2 at high temperatures, followed by oxidation at lower temperatures with CO2, splitting it to produce CO, driven by concentrated solar radiation obtained with concentrating solar technologies (CST) to provide the high reaction temperatures of typically up to 1,500°C. Since cerium oxide was first explored as a solar-driven redox material in 2006, and to specifically split CO2 in 2010, there has been an increasing interest in this material. The solar-to-fuel conversion 1097efficiency is influenced by the material composition itself, but also by the material morphology that mostly determines the available surface area for solid/gas reactions (the material oxidation mechanism is mainly governed by surface reaction). The diffusion length and specific surface area affect, respectively, the reduction and oxidation steps. They both depend on the reactive material morphology that also substantially affects the reaction kinetics and heat and mass transport in the material. Accordingly, the main relevant options for materials shaping are summarized. We explore the effects of microstructure and porosity, and the exploitation of designed structures such as fibers, 3-DOM (three-dimensionally ordered macroporous) materials, reticulated and replicated foams, and the new area of biomimetic/biomorphous porous ceria redox materials produced from natural and sustainable templates such as wood or cork, also known as ecoceramics
Solar thermochemical CO2 splitting using cork-templated ceria ecoceramics
This work addresses the solar-driven thermochemical production of CO and O2 from two-step CO2-splitting cycles, using both ceria granules prepared from cork templates (CG) and ceria foams from polyurethane templates (CF). These materials were cycled in a high-temperature indirectly-irradiated solar tubular reactor using a temperature-swing process. Samples were typically reduced at 1400 °C using concentrated solar power as a heating source and subsequently oxidised with CO2 between 1000-1200 °C. On average, CO production yields for CG were two times higher than for CF, indicating that the morphology of this three-dimensionally ordered macroporous (3-DOM) CeO2 improves the reaction kinetics. Their performance stability was demonstrated by conducting 11 cycles under solar irradiation conditions. Slightly increasing the reduction temperature strongly enhanced the reduction extent, and thus the CO production yield (reaching about 0.2 mmol g-1 after reduction at 1450 °C in inert gas), while decreasing the oxidation temperature mainly improved the CO production rate (up to 1.43 μmol s-1 g-1 at 1000 °C). Characterisation of the 3-DOM structure, by means of XRD and SEM, provided insights into the reactivity behaviour of the developed materials. The pre-sintered ceria granules retained their structure after cycling. The fact that the mean cell size of CG is smaller (at least one order of magnitude) than that of CF suggests that its exposed surfaces enhanced reaction rates by a factor of two. Moreover, the maximum fuel production rate of CG was roughly three times greater than that reported previously for a ceria reticulated porous foam with dual-scale porosity
Solar Redox Cycling of Ceria Structures Based on Fiber Boards, Foams, and Biomimetic Cork-Derived Ecoceramics for Two-Step Thermochemical H2O and CO2Splitting
Solar thermochemical conversion of H2O and captured CO2 is considered for the production of high-value solar fuels and CO2 valorization, using nonstoichiometric oxygen-exchange redox materials. This work aims to compare the thermochemical cycle performance of different ceria structures, including biomimetic cork-templated ceria (CTCe), ceria foams (CeF), and ceria bulk fiber boards (CeFB), to study the effect of the morphology on fuel production from two-step H2O and CO2 splitting via solar redox cycling. The considered materials underwent thermochemical cycles in a directly irradiated solar reactor under various operating conditions. Typically, a thermal reduction at 1400 °C under Ar at atmospheric pressure, using concentrated solar energy, was carried out followed by an oxidation step with H2O or CO2 between 800 and 1050 °C. The comparison of the fuel production rate and yield from the reactive materials highlighted the importance of the material thermal stability during cycling. CTCe and CeF showed good O2 and fuel production stability over repeated cycles, while CeFB exhibited a decrease of the production because of sintering and thermal gradient due to its low thermal conductivity. Biomimetic CTCe showed a higher fuel production rate compared to the other investigated materials, explained by the favorable microstructure of the cork-based ceramic. The morphology obtained from the cork structure led to the improvement of the redox activity, demonstrating the relevance of studying this material for thermochemical H2O and CO2 splitting cycles. In addition, the impact of the operating conditions was investigated. A decrease of the starting oxidation temperature, an increase of the CO2 molar fraction (lower CO/CO2 ratio), or a high total gas flow rate favoring gas product dilution had a beneficial impact on the CO (or H2) production rate
Single nucleotide polymorphisms from Theobroma cacao expressed sequence tags associated with witches' broom disease in cacao
In order to increase the efficiency of cacao tree resistance to witches¿ broom disease, which is caused by Moniliophthora perniciosa (Tricholomataceae), we looked for molecular markers that could help in the selection of resistant cacao genotypes. Among the different markers useful for developing marker-assisted selection, single nucleotide polymorphisms (SNPs) constitute the most common type of sequence difference between alleles and can be easily detected by in silico analysis from expressed sequence tag libraries. We report the first detection and analysis of SNPs from cacao-M. perniciosa interaction expressed sequence tags, using bioinformatics. Selection based on analysis of these SNPs should be useful for developing cacao varieties resistant to this devastating disease. (Résumé d'auteur
- …