A new B-dot probe-based diagnostic for amplitude, polarization, and wavenumber measurements of ion cyclotron range-of frequency fields on ASDEX Upgrade

A new B-dot probe-based diagnostic has been installed on an ASDEX Upgrade tokamak to characterize ion cyclotron range-of frequency (ICRF) wave generation and interaction with magnetized plasma. The diagnostic consists of a field-aligned array of B-dot probes, oriented to measure fast and slow ICRF wave fields and their field-aligned wavenumber (k(//)) spectrum on the low field side of ASDEX Upgrade. A thorough description of the diagnostic and the supporting electronics is provided. In order to compare the measured dominant wavenumber of the local ICRF fields with the expected spectrum of the launched ICRF waves, in-air near-field measurements were performed on the newly installed 3-strap ICRF antenna to reconstruct the dominant launched toroidal wavenumbers (k(tor)). Measurements during a strap current phasing scan in tokamak discharges reveal an upshift in k(//) as strap phasing is moved away from the dipole configuration. This result is the opposite of the k(tor) trend expected from in-air near-field measurements; however, the near-field based reconstruction routine does not account for the effect of induced radiofrequency (RF) currents in the passive antenna structures. The measured exponential increase in the local ICRF wave field amplitude is in agreement with the upshifted k(//), as strap phasing moves away from the dipole configuration. An examination of discharges heated with two ICRF antennas simultaneously reveals the existence of beat waves at 1 kHz, as expected from the difference of the two antennas' operating frequencies. Beats are observed on both the fast and the slow wave probes suggesting that the two waves are coupled outside the active antennas. Although the new diagnostic shows consistent trends between the amplitude and the phase measurements in response to changes applied by the ICRF antennas, the disagreement with the in-air near-field measurements remains. An electromagnetic model is currently under development to address this issue. (C) 2015 AIP Publishing LLC

3D simulations of gas puff effects on edge density and ICRF coupling in ASDEX Upgrade

In recent experiments, a local gas puff was found to be an effective way to tailor the scrape-off layer (SOL) density and improve the ion cyclotron range of frequency (ICRF) power coupling in tokamaks. In order to quantitatively reproduce these experiments, to understand the corresponding physics and to optimize the gas valve positions and rates, simulations were carried out with the 3D edge plasma transport code EMC3-EIRENE in ASDEX Upgrade. An inter-ELM phase of an H-mode discharge with a moderate gas puff rate (1.2 x 10(22) electrons s(-1)) is used in our simulations. We simulated cases with gas puff in the lower divertor, the outer mid-plane and the top of the machine while keeping other conditions the same. Compared with the lower divertor gas puff, the outer mid-plane gas puff can increase the local density in front of the antennas most effectively, while a toroidally uniform but significantly smaller enhancement is found for the top gas puff. Good agreement between our simulations and experiments is obtained. With further simulations, the mechanisms of SOL density tailoring via local gas puffing and the strategies of gas puff optimization are discussed in the paper

Modelling of the ICRF induced E x B convection in the scrape-off-layer of ASDEX Upgrade

In magnetic controlled fusion devices, plasma heating with radio-frequency (RF) waves in the ion cyclotron (IC) range of frequency relies on the electric field of the fast wave to heat the plasma. However, the slow wave can be generated parasitically. The electric field of the slow wave can induce large biased plasma potential (DC potential) through sheath rectification. The rapid variation of the rectified potential across the equilibrium magnetic field can cause significant convective transport (E x B drifts) in the scrape-off layer (SOL). In order to understand this phenomenon and reproduce the experiments, 3D realistic simulations are carried out with the 3D edge plasma fluid and kinetic neutral code EMC3-Eirene in ASDEX Upgrade. For this, we have added the prescribed drift terms to the EMC3 equations and verified the 3D code results against the analytical ones in cylindrical geometry. The edge plasma potential derived from the experiments is used to calculate the drift velocities, which are then treated as input fields in the code to obtain the final density distributions. Our simulation results are in good agreement with the experiments

Looking At the Distant Universe with the MeerKAT Array (LADUMA)

The MeerKAT (64 x 13.5m dish radio interferometer) is South Africa's precursor instrument for the Square Kilometre Array (SKA), exploring dish design, instrumentation, and the characteristics of a Karoo desert site and is projected to be on sky in 2016. One of two top-priority, Key Projects is a single deep field, integrating for 5000 hours total with the aim to detect neutral atomic hydrogen through its 21 cm line emission out to redshift unity and beyond. This first truly deep HI survey will help constrain fueling models for galaxy assembly and evolution. It will measure the evolution of the cosmic neutral gas density and its distribution over galaxies over cosmic time, explore evolution of the gas in galaxies, measure the Tully-Fisher relation, measure OH maser counts, and address many more topics. Here we present the observing strategy and envisaged science case for this unique deep field, which encompasses the Chandra Deep Field-South (and the footprints of GOODS, GEMS and several other surveys) to produce a singular legacy multi-wavelength data-set.Comment: 3 pages, 2 figures, to appear in the proceedings of IAU Symposium 284, "The Spectral Energy Distribution of Galaxies" (SED2011), 5-9 September 2011, Preston, UK, editors R.J. Tuffs & C.C.Popesc

On the sizes of z>2 Damped Lyman-alpha Absorbing Galaxies

Recently, the number of detected galaxy counterparts of z > 2 Damped Lyman-alpha Absorbers in QSO spectra has increased substantially so that we today have a sample of 10 detections. M{\o}ller et al. in 2004 made the prediction, based on a hint of a luminosity-metallicity relation for DLAs, that HI size should increase with increasing metallicity. In this paper we investigate the distribution of impact parameter and metallicity that would result from the correlation between galaxy size and metallicity. We compare our observations with simulated data sets given the relation of size and metallicity. The observed sample presented here supports the metallicity-size prediction: The present sample of DLA galaxies is consistent with the model distribution. Our data also show a strong relation between impact parameter and column density of HI. We furthermore compare the observations with several numerical simulations and demonstrate that the observations support a scenario where the relation between size and metallicity is driven by feedback mechanisms controlling the star-formation efficiency and outflow of enriched gas.Comment: Accepted for publishing in MNRAS lette

A Glimpse at Quasar Host Galaxy Far-UV Emission, Using DLAs as Natural Coronagraphs

In merger-driven models of massive galaxy evolution, the luminous quasar phase is expected to be accompanied by vigorous star formation in quasar host galaxies. In this paper, we use high column density Damped Lyman Alpha (DLA) systems along quasar sight lines as natural coronagraphs to directly study the far-UV (FUV) radiation from the host galaxies of luminous background quasars. We have stacked the spectra of $\sim$2,000 DLA systems (N_HI>10^{20.6} cm^{-2}) with a median absorption redshift = 2.6 selected from quasars observed in the SDSS-III Baryon Oscillation Spectroscopic Survey. We detect residual flux in the dark troughs of the composite DLA spectra. The level of this residual flux significantly exceeds systematic errors in the SDSS fiber sky subtraction; furthermore, the residual flux is strongly correlated with the continuum luminosity of the background quasar, while uncorrelated with DLA column density or metallicity. We conclude that the flux could be associated with the average FUV radiation from the background quasar host galaxies (with medium redshift < z > = 3.1) that is not blocked by the intervening DLA. Assuming all of the detected flux originates from quasar hosts, for the highest quasar luminosity bin (= 2.5x 10^{13} L_sun), the host galaxy has a FUV intensity of 1.5 +/- 0.2 x 10^{40} erg s^{-1} A^{-1}; this corresponds to an unobscured UV star formation rate of 9 M_sun/yr.Comment: 15 pages, 10 figures, Accepted for publication in Ap

A multichannel reflectometer for edge density profile measurements at the ICRF antenna in ASDEX upgrade

A multichannel reflectometer will be built for the new three-straps ICRF antenna of ASDEX Upgrade (AUG), to study the density behavior in front of it. Ten different accesses to the plasma are available for the three reflectometer channels that can be interchanged without breaking the machine vacuum. Frequency is scanned from 40 GHz to 68 GHz, in 10 mu s, which corresponds to a cut-off density ranging from 10(18) divided by 10(19)m(-3) in the Right cut-off of the X-mode propagation, for standard toroidal magnetic field values of AUG

Directional Radiation and Photodissociation Regions in Molecular Hydrogen Clouds

Some astrophysical observations of molecular hydrogen point to a broadening of the velocity distribution for molecules at excited rotational levels. This effect is observed in both Galactic and high redshift clouds. Analysis of H_2, HD, and CI absorption lines has revealed the broadening effect in the absorption system of QSO 1232+082 (z_{abs}=2.33771). We analyze line broadening mechanisms by considering in detail the transfer of ultraviolet radiation (in the resonance lines of the Lyman and Werner H_2 molecular bands) for various velocity distributions at excited rotational levels. The mechanism we suggest includes the saturation of the lines that populate excited rotational levels (radiative pumping) and manifests itself most clearly in the case of directional radiation in the medium. Based on the calculated structure of a molecular hydrogen cloud in rotational level populations, we have considered an additional mechanism that takes into account the presence of a photodissociation region. Note that disregarding the broadening effects we investigated can lead to a significant systematic error when the data are processed.Comment: 14 pages, 10 figure