14,088 research outputs found

    Heat addition to a subsonic boundary layer: A preliminary analytical study

    Get PDF
    A preliminary analytical study of the effects of heat addition to the subsonic boundary layer flow over a typical airfoil shape is presented. This phenomenon becomes of interest in the space shuttle mission since heat absorbed by the wing structure during re-entry will be rejected to the boundary layer during the subsequent low speed maneuvering and landing phase. A survey of existing literature and analytical solutions for both laminar and turbulent flow indicate that a heated surface generally destabilizes the boundary layer. Specifically, the boundary layer thickness is increased, the skin friction at the surface is decreased and the point of flow separation is moved forward. In addition, limited analytical results predict that the angle of attack at which a heated airfoil will stall is significantly less than the stall angle of an unheated wing. These effects could adversely affect the lift and drag, and thus the maneuvering capabilities of booster and orbiter shuttle vehicles

    Periodicities In The X-Ray Intensity Variations of TV Columbae: An Intermediate Polar

    Get PDF
    We present results from a temporal analysis of the longest and the most sensitive X-ray observations of TV Columbae--an intermediate polar. The observations were carried out with the RXTE PCA, ROSAT PSPC, and ASCA. Data were analyzed using a 1-dimensional CLEAN and Bayesian algorithms. The presence of a nearly sinusoidal modulation due to the spin of the white dwarf is seen clearly in all the data, confirming the previous reports based on the EXOSAT data. An improved period of 1909.7+/-2.5s is derived for the spin from the RXTE data.The binary period of 5.5hr is detected unambiguously in X-rays for the first time. Several side-bands due to the interaction of these periods are observed in the power spectra, thereby suggesting contributions from both the disk-fed and the stream-fed accretion for TV Col. The accretion disk could perhaps be precessing as side-bands due to the influence of 4 day period on the orbital period are seen. The presence of a significant power at certain side-bands of the spin frequency indicates that the emission poles are asymmetrically located. The strong power at the orbital side-bands seen in both the RXTE and ROSAT data gives an indication for an absorption site fixed in the orbital frame. Both the spin and the binary modulation are found to be energy-dependent. Increased hardness ratio during a broad dip in the intensity at binary phase of 0.75--1.0 confirms the presence of a strong attenuation due to additional absorbers probably from an impact site of the accretion stream with the disk or magnetosphere. Hardness ratio variations and the energy dependent modulation depth during the spin modulation can be explained by partially covered absorbers in the path of X-ray emission region in the accretion stream.Comment: 34 pages, including 12 figures, Accepted for publication in Astronomical Journal, scheduled for January 2004 issue (vol. 127

    Rotor redesign for a highly loaded 1800 ft/sec tip speed fan. 1: Aerodynamic and mechanical design report

    Get PDF
    A quasi three dimensional design system and multiple-circular-arc airfoil sections were used to design a fan rotor. An axisymmetric intrablade flow field calculation modeled the shroud of an isolated splitter and radial distribution. The structural analysis indicates that the design is satisfactory for evaluation of aerodynamic performance of the fan stage in a test facility

    Measurement of dimensional stability

    Get PDF
    A technique was developed for measuring, with a precision of one part 10 to the 9th power, changes in physical dimensions delta L/L. Measurements have commenced on five materials: Heraeus-Schott Homosil (vitreous silica), Corning 7940 (vitreous silica), Corning ULE 7971 (titanium silicate), Schott Zero-Dur, and Owens-Illinois Cer-Vit C-101. The study was extended to include Universal Cyclops Invar LR-35 and Simonds-Saw Superinvar

    The X-ray properties of the magnetic cataclysmic variable UUColumbae

    Get PDF
    Aims. XMM-Newton observations to determine for the first time the broad-band X-ray properties of the faint, high galactic latitude intermediate polar UUCol are presented. Methods. We performed X-ray timing analysis in different energy ranges of the EPIC cameras, which reveals the dominance of the 863 s white dwarf rotational period. The spin pulse is strongly energy dependent. Weak variabilities at the beat 935 s and at the 3.5 h orbital periods are also observed, but the orbital modulation is detected only below 0.5 keV. Simultaneous UV and optical photometry shows that the spin pulse is anti-phased with respect to the hard X-rays. Analysis of the EPIC and RGS spectra reveals the complexity of the X-ray emission, which is composed of a soft 50 eV black–body component and two optically thin emission components at 0.2 keV and 11 keV strongly absorbed by dense material with an equivalent hydrogen column density of 1023 cm−2 that partially (50%) covers the X-ray source. Results. The complex X-ray and UV/optical temporal behaviour indicates that accretion occurs predominantly (∼80%) via a disc with a partial contribution (∼20%) directly from the stream. The main accreting pole dominates at high energies whilst the secondary pole mainly contributes in the soft X-rays and at lower energies. The bolometric flux ratio of the soft-to-hard X-ray emissions is found to be consistent with the prediction of the standard accretion shock model. We find the white dwarf in UUCol accretes at a low rate and possesses a low magnetic moment. It is therefore unlikely that UUCol will evolve into a moderate field strength polar, so that the soft X-ray intermediate polars still remain an enigmatic small group of magnetic cataclysmic variables

    Observables, gauge invariance, and the role of the observers in the limit from general relativity to special relativity

    Get PDF
    Some conceptual issues concerning general invariant theories, with special emphasis on general relativity, are analyzed. The common assertion that observables must be required to be gauge invariant is examined in the light of the role played by a system of observers. Some features of the reduction of the gauge group are discussed, including the fact that in the process of a partial gauge fixing the reduction at the level of the gauge group and the reduction at the level of the variational principle do not commute. Distinctions between the mathematical and the physical concept of gauge symmetry are discussed and illustrated with examples. The limit from general relativity to special relativity is considered as an example of a gauge group reduction that is allowed in some specific physical circumstances. Whether and when the Poincar\'e group must be considered as a residual gauge group will come out as a result of our analysis, that applies, in particular, to asymptotically flat spaces.Comment: 17 page

    Fly-by-light flight control system technology development plan

    Get PDF
    The results of a four-month, phased effort to develop a Fly-by-Light Technology Development Plan are documented. The technical shortfalls for each phase were identified and a development plan to bridge the technical gap was developed. The production configuration was defined for a 757-type airplane, but it is suggested that the demonstration flight be conducted on the NASA Transport Systems Research Vehicle. The modifications required and verification and validation issues are delineated in this report. A detailed schedule for the phased introduction of fly-by-light system components has been generated. It is concluded that a fiber-optics program would contribute significantly toward developing the required state of readiness that will make a fly-by-light control system not only cost effective but reliable without mitigating the weight and high-energy radio frequency related benefits
    corecore