Improvement of rheological and transient response of magnetorheological grease with amalgamation of cobalt ferrite

The time responsiveness of magnetorheological grease (MRG) towards magnetic field stimulus is crucial in order to ensure the high performance of MR devices. However, due to the thixotropic properties of grease, MRG has been restricted in terms of responding rapidly towards these magnetic fields. Therefore, polygonal shapes made up of 1–3 of cobalt-ferrite (CoFe2O4) particles with different concentrations from 0 to 5 wt.% were introduced to enhance the responsiveness of the MRG. The results revealed that the linear viscoelastic (LVE) region of the modified MRG improved between 29% and 43% during the off-state and on-state conditions, respectively. The absolute MR effect of MRG increased by at least 60% due to the improvement in the particle's chain alignment with that of the applied magnetic fields. In terms of transient responses, particularly within the highly acceptable LVE region (0.05%), the MRG with CoFe2O4 performed about 5–6 s faster as compared to pure MRG, which was attributed to the improvement in the particle's mobility in the grease medium.

Effects of environmental factors on development of Pyrenopeziza brassicae (light leaf spot) apothecia on oilseed rape debris

Publication no. P-2001-0221-01R. This article is in the public domain and not copyrightable. It may be freely reprinted with customary crediting of the source. The American Phytopathological Society, 2001The development of Pyrenopeziza brassicae (light leaf spot) apothecia was studied on petiole debris from artificially infected oilseed rape leaves incubated at temperatures from 6 to 22 degreesC under different wetness regimes and in 16 h light/8 h dark or continuous darkness. There was no significant difference between light treatments in numbers of apothecia that developed. Mature apothecia developed at temperatures from 5 to 18 degreesC but not at 22 degreesC. The rate of apothecial development decreased as temperature decreased from 18 to 5 degreesC; mature apothecia were first observed after 5 days at 18 degreesC and after 15 days at 6 degreesC. Models were fitted to estimates of the time (days) for 50% of the maximum number of apothecia to develop (t(1); model 1, t(1) = 7.6 + 55.8(0.839)(T)) and the time for 50% of the maximum number of apothecia to decay (t(2); model 2, t(2) = 24.2 + 387(0.730)(T)) at temperatures (T) from 6 to 18 degreesC. An interruption in wetness of the petiole debris for 4 days after 4, 7, or 10 days of wetness delayed the time to observation of the first mature apothecia for approximate to4 days and decreased the number of apothecia produced (by comparison with continuous wetness). A relationship was found between water content of pod debris and electrical resistance measured by a debris-wetness sensor. The differences between values of tl predicted by model 1 and observed values of t(1) were 1 to 9 days. Model 2 did not predict t(2); apothecia decayed more quickly under natural conditions than predicted by model 2.Peer reviewe

Determinants of teachers' practice of infusing Islamic manners (adab) in the secular classrooms in the Southern Thailand

The objectives of this research are to develop, examine and validate a model of infusing Islamic manners (adab) in the secular classroom (iMIS). A proposed model consists of endogenous variables (teacher attributes and perceived support) and exogenous variables (teachers’ performance in iMIS). A survey instrument was administered to 561 both Malay and non- Malay speaking Muslim teachers at public primary schools in 6 provinces of Southern Thailand. The structural equation modeling (SEM) is used to validate and test the model fit to the empirical data. The results show that the four proposed teacher attributes (self-efficacy, values, Islamic work ethic, and organizational commitment) and two factors of teachers’ perceived support (peer and curriculum support) directly influence to their performance in iMIS

Solvent dependence of the rheological properties in hydrogel magnetorheological plastomer

Chemically crosslinked hydrogel magnetorheological (MR) plastomer (MRP) embedded with carbonyl iron particles (CIPs) exhibits excellent magnetic performance (MR effect) in the presence of external stimuli especially magnetic field. However, oxidation and desiccation in hydrogel MRP due to a large amount of water content as a dispersing phase would limit its usage for long‐term applications, especially in industrial engineering. In this study, different solvents such as dimethyl sulfoxide (DMSO) are also used to prepare polyvinyl alcohol (PVA) hydrogel MRP. Thus, to understand the dynamic viscoelastic properties of hydrogel MRP, three different samples with different solvents: water, DMSO, and their binary mixtures (DMSO/water) were prepared and systematically carried out using the oscillatory shear. The outcomes demonstrate that the PVA hydrogel MRP prepared from precursor gel with water shows the highest MR effect of 15,544% among the PVA hydrogel MRPs. However, the samples exhibit less stability and tend to oxidise after a month. Meanwhile, the samples with binary mixtures (DMSO/water) show an acceptable MR effect of 11,024% with good stability and no CIPs oxidation. Otherwise, the sample with DMSO has the lowest MR effect of 7049% and less stable compared to the binary solvent samples. This confirms that the utilisation of DMSO as a new solvent affects the rheological properties and stability of the samples

Evidence of Environmental Dependencies of Type Ia Supernovae from the Nearby Supernova Factory indicated by Local H{\alpha}

(Abridged) We study the host galaxy regions in close proximity to Type Ia supernovae (SNe Ia) to analyze relations between the properties of SN Ia events and environments most similar to where their progenitors formed. We focus on local H\alpha\ emission as an indicator of young environments. The Nearby Supernova Factory has obtained flux-calibrated spectral timeseries for SNe Ia using integral field spectroscopy, allowing the simultaneous measurement of the SN and its immediate vicinity. For 89 SNe Ia we measure H\alpha\ emission tracing ongoing star formation within a 1 kpc radius around each SN. This constitutes the first direct study of the local environment for a large sample of SNe Ia also having accurate luminosity, color and stretch measurements. We find that SNe Ia with local H\alpha\ emission are redder by 0.036+/-0.017 mag, and that the previously-noted correlation between stretch and host mass is entirely driven by the SNe Ia coming from passive regions. Most importantly, the mean standardized brightness for SNe Ia with local H\alpha\ emission is 0.094+/-0.031 mag fainter than for those without. This offset arises from a bimodal structure in the Hubble residuals, that also explains the previously-known host-mass bias. We combine this bimodality with the cosmic star-formation rate to predict changes with redshift in the mean SN Ia brightness and the host-mass bias. This change is confirmed using high-redshift SNe Ia from the literature. These environmental dependences point to remaining systematic errors in SNe Ia standardization. The observed brightness offset is predicted to cause a significant bias in measurements of the dark energy equation of state. Recognition of these effects offers new opportunities to improve SNe Ia as cosmological probes - e.g. SNe Ia having local H\alpha\ emission are more homogeneous, having a brightness dispersion of 0.105+/-0.012 mag.Comment: accepted for publication in Section 3. Cosmology of A&A (The official date of acceptance is 30/08/2013

Type Ia Supernova Hubble Residuals and Host-Galaxy Properties

Kim et al. (2013) [K13] introduced a new methodology for determining peak-brightness absolute magnitudes of type Ia supernovae from multi-band light curves. We examine the relation between their parameterization of light curves and Hubble residuals, based on photometry synthesized from the Nearby Supernova Factory spectrophotometric time series, with global host-galaxy properties. The K13 Hubble residual step with host mass is $0.013\pm 0.031$ mag for a supernova subsample with data coverage corresponding to the K13 training; at $\ll 1\sigma$, the step is not significant and lower than previous measurements. Relaxing the data coverage requirement the Hubble residual step with host mass is $0.045\pm 0.026$ mag for the larger sample; a calculation using the modes of the distributions, less sensitive to outliers, yields a step of 0.019 mag. The analysis of this article uses K13 inferred luminosities, as distinguished from previous works that use magnitude corrections as a function of SALT2 color and stretch parameters: Steps at $>2\sigma$ significance are found in SALT2 Hubble residuals in samples split by the values of their K13 $x(1)$ and $x(2)$ light-curve parameters. $x(1)$ affects the light-curve width and color around peak (similar to the $\Delta m_{15}$ and stretch parameters), and $x(2)$ affects colors, the near-UV light-curve width, and the light-curve decline 20 to 30 days after peak brightness. The novel light-curve analysis, increased parameter set, and magnitude corrections of K13 may be capturing features of SN~Ia diversity arising from progenitor stellar evolution.Comment: 17 pages, 6 figures. Accepted by Astrophysical Journa

Measuring cosmic bulk flows with Type Ia Supernovae from the Nearby Supernova Factory

Context. Our Local Group of galaxies appears to be moving relative to the cosmic microwave background with the source of the peculiar motion still uncertain. While in the past this has been studied mostly using galaxies as distance indicators, the weight of type Ia supernovae (SNe Ia) has increased recently with the continuously improving statistics of available low-redshift supernovae. Aims. We measured the bulk flow in the nearby universe ($0.015 < z < 0.1$) using 117 SNe Ia observed by the Nearby Supernova Factory, as well as the Union2 compilation of SN Ia data already in the literature. Methods. The bulk flow velocity was determined from SN data binned in redshift shells by including a coherent motion (dipole) in a cosmological fit. Additionally, a method of spatially smoothing the Hubble residuals was used to verify the results of the dipole fit. To constrain the location and mass of a potential mass concentration (e.g., the Shapley supercluster) responsible for the peculiar motion, we fit a Hubble law modified by adding an additional mass concentration. Results. The analysis shows a bulk flow that is consistent with the direction of the CMB dipole up to $z \sim 0.06$, thereby doubling the volume over which conventional distance measures are sensitive to a bulk flow. We see no significant turnover behind the center of the Shapley supercluster. A simple attractor model in the proximity of the Shapley supercluster is only marginally consistent with our data, suggesting the need for another, more distant source. In the redshift shell $0.06 < z < 0.1$, we constrain the bulk flow velocity to $< 240~\textrm{km s}^{-1}$ (68% confidence level) for the direction of the CMB dipole, in contradiction to recent claims of the existence of a large-amplitude dark flow.Comment: 12 pages, 5 figures, added corrigendum (http://adsabs.harvard.edu/abs/2015A%26A...578C...1F