Site-dependent charge transfer at the Pt(111)-ZnPc interface and the effect of iodine

The electronic structure of ZnPc, from sub-monolayers to thick films, on bare and iodated Pt(111) is studied by means of X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS) and scanning tunneling microscopy (STM). Our results suggest that at low coverage ZnPc lies almost parallel to the Pt(111) substrate, in a non-planar configuration induced by Zn-Pt attraction, leading to an inhomogeneous charge distribution within the molecule and charge transfer to the molecule. ZnPc does not form a complete monolayer on the Pt surface, due to a surface-mediated intermolecular repulsion. At higher coverage ZnPc adopts a tilted geometry, due to a reduced molecule-substrate interaction. Our photoemission results illustrate that ZnPc is practically decoupled from Pt, already from the second layer. Pre-deposition of iodine on Pt hinders the Zn-Pt attraction, leading to a non-distorted first layer ZnPc in contact with Pt(111)-I $\left(\sqrt{3}\times\sqrt{3}\right)$ or Pt(111)-I $\left(\sqrt{7}\times\sqrt{7}\right)$, and a more homogeneous charge distribution and charge transfer at the interface. On increased ZnPc thickness iodine is dissolved in the organic film where it acts as an electron acceptor dopant.Comment: 12 pages, 9 figure

The secondary electron yield of air exposed metal surfaces at the example of niobium

The secondary electron yield (SEY) variation of atomically clean metal surfaces due to air exposures and during subsequent heat treatments is described with the example of a sputter-deposited Nb thin film. Corresponding variations of the surface chemical composition have been monitored using AES and SSIMS. On the basis of these results and of previously obtained SEY results on metals and metal oxides the origin of the SEY variations is discussed. The SEY increase, which is generally observed during long lasting air exposures of clean metals, is mainly caused by the adsorption of an airborne carbonaceous contamination layer. The estimated value of about 3 for the maximum SEY of this layer is higher than that of all pure metals. Only in some cases the air-formed oxide can contribute to the air exposure induced SEY increase while many oxides have a lower SEY than their parent metals. From the experimental data it can also be excluded that the SEY increase during air exposures is mainly due to an increased secondary electron escape probability

The secondary electron yield of TiZr and TiZrV non evaporable getter thin film coatings

The secondary electron yield (SEY) of two different non evaporable getter (NEG) samples has been measured 'as received' and after thermal treatment. The investigated NEGs are TiZr and TiZrV thin film coatings of 1 mm thickness, which are sputter deposited onto copper substrates. The maximum SEY dmax of the air exposed TiZr and TiZrV coating decreases from above 2.0 to below 1.1 during a 2 hour heat treatment at 250 °C and 200 °C, respectively. Saturating an activated TiZrV surface under vacuum with the gases typically present in ultra high vacuum systems increases dmax by about 0.1. Changes in elemental surface composition during the applied heat treatments were monitored by Auger electron spectroscopy (AES). After activation carbon, oxygen and chlorine were detected on the NEG surfaces. The potential of AES for detecting the surface modifications which cause the reduction of SE emission during the applied heat treatments is critically discussed

High Efficacy of Two Artemisinin-Based Combinations (Artesunate + Amodiaquine and Artemether + Lumefantrine) in Caala, Central Angola.

In April 2004, 137 children 6-59 months of age with uncomplicated Plasmodium falciparum (Pf) malaria (Caala, Central Angola) were randomized to receive either artemether-lumefantrine (Coartem) or artesunate + amodiaquine (ASAQ). After 28 days of follow-up, there were 2/61 (3.2%) recurrent parasitemias in the Coartem group and 4/64 (6.2%) in the ASAQ group (P = 0.72), all classified as re-infections after PCR genotyping (cure rate = 100% [95%CI: 94-100] in both groups). Only one patient (ASAQ group) had gametocytes on day 28 versus five (Coartem) and three (ASAQ) at baseline. Compared with baseline, anemia was significantly improved after 28 days of follow-up in both groups (Coartem: from 54.1% to 13.4%; ASAQ: from 53.1% to 15.9%). Our findings are in favor of a high efficacy of both combinations in Caala. Now that Coartem has been chosen as the new first-line anti-malarial, the challenge is to insure that this drug is available and adequately used

An approximate model for optimizing Bernoulli columns against buckling

International audienceProposed herein is a simple but powerful method for optimization of inhomogeneous, elastically restrained columns against buckling when subjected to both compressive concentrated and distributed axial loads that include self-weight. Unlike previously published studies on the subject, we do not have to specify any prescribed geometrical variation and analysis may be readily performed on columns with any complex geometrical shape. In the proposed method, the differential equation governing the buckling of Euler columns is discretized by adopting the Hencky bar-chain model, and critical buckling loads are evaluated by seeking the lowest eigenvalue of the resulting system of algebraic equations. The discrete nature of the formulation, as well as the reduced number of parameters to be optimized, is well suited for the adopted optimization process that is based on evolutionary algorithms. We propose an optimization scheme based on a parallel genetic algorithm. A comparisori study between the obtained optimal column shape and buckling loads on homogeneous and isotropic columns with circular cross section, and the numerical and analytical solutions found in the open literature shows fast convergence, high accuracy and flexibility of the proposed method

How Multivalency controls Ionic Criticality

To understand how multivalency influences the reduced critical temperatures, Tce (z), and densities, roce (z), of z : 1 ionic fluids, we study equisized hard-sphere models with z = 1-3. Following Debye, Hueckel and Bjerrum, association into ion clusters is treated with, also, ionic solvation and excluded volume. In good accord with simulations but contradicting integral-equation and field theories, Tce falls when z increases while roce rises steeply: that 80-90% of the ions are bound in clusters near T_c serves to explain these trends. For z \neq 1 interphase Galvani potentials arise and are evaluated.Comment: 4 pages, 4 figure

The variation of the secondary electron yield and of the desorption yield of copper under electron bombardment: Origin and impact on the conditioning of the LHC

The operation of most radio-frequency components in accelerators rely on the conditioning obtained usually by gradually increasing the power fed into these devices. This effect is related to the reduction of the desorption yields and of the secondary electron yields of surfaces exposed to electron bombardment. In LHC, similar decreases will also limit the detrimental consequences of the electron cloud phenomenon on the beam stability, the power deposited in the cryogenic system and the gas density. The parallel evolution of the desorption yield and of the secondary electron yield will be discussed and compared to the changes to the surface composition as observed by surface analytical techniques. The possible origin of the secondary electron yield decrease will also be discussed at the light of these new results

Cadmium accumulation and interactions with zinc, copper, and manganese, analysed by ICP-MS in a long-term Caco-2 TC7 cell model

The influence of long-term exposure to cadmium (Cd) on essential minerals was investigated using a Caco-2 TC7 cells and a multi-analytical tool: microwave digestion and inductively coupled plasma mass spectrometry. Intracellular levels, effects on cadmium accumulation, distribution, and reference concentration ranges of the following elements were determined: Na, Mg, Ca, Cr, Fe, Mn, Co, Ni, Cu, Zn, Mo, and Cd. Results showed that Caco-2 TC7 cells incubated long-term with cadmium concentrations ranging from 0 to 10 lmol Cd/l for 5 weeks exhibited a significant increase in cadmium accumulation. Furthermore, this accumulation was more marked in cells exposed long-term to cadmium compared with controls, and that this exposure resulted in a significant accumulation of copper and zinc but not of the other elements measured. Interactions of Cd with three elements: zinc, copper, and manganese were particularly studied. Exposed to 30 lmol/l of the element, manganese showed the highest inhibition and copper the lowest on cadmium intracellular accumulation but Zn, Cu, and Mn behave differently in terms of their mutual competition with Cd. Indeed, increasing cadmium in the culture medium resulted in a gradual and significant increase in the accumulation of zinc. There was a significant decrease in manganese from 5 lmol Cd/l exposure, and no variation was observed with copper. Abbreviation: AAS – Atomic absorption spectrometry; CRM– Certified reference material; PBS – Phosphate buffered saline without calcium and magnesium; DMEM – Dubelcco’s modified Eagle’s medium

Enhancement of tumorigenicity of human breast adenocarcinoma cells in nude mice by matrigel and fibroblasts.

The failure of MCF7 cells to induce the formation of tumours after sub-cutaneous inoculation into athymic nude mice can be obviated by the simultaneous injection of an extract of basement membrane proteins (matrigel). Tumour growth is promoted and the latency period is low (2 to 4 weeks). In the absence of matrigel, the simultaneous inoculation of fibroblasts and MCF7 cells also resulted in the development of tumours, but with a longer latency period (about 2 months). The tumorigenic synergy between matrigel and fibroblasts was evidenced by co-inoculating MCF7 cells MDA-MB 231 cells with fibroblasts and matrigel. This co-inoculation decreased the delay of appearance of the tumours and/or accelerated the tumour growth, depending upon the number of fibroblasts injected. Repeated injections of fibroblasts conditioned medium, at the site of inoculum of tumour cells also enhanced tumour growth, suggesting the involvement of soluble factors secreted by fibroblasts. Histologically, tumours induced by co-inoculation of tumour cells and fibroblasts contained more stromal structures including vimentin-positive cells, fibronectin and interstitial collagens. These data suggest that human tumours may be reconstituted and grown in athymic nude mice using basement membrane components and fibroblasts as inductors