11 research outputs found
Tuneable denture adhesives using biomimetic principles for enhanced tissue adhesion in moist environments
Nature provides many interesting examples of adhesive strategies. Of particular note, the protein glue secreted by marine mussels delivers high adhesion in wet and dynamic environments owing to existence of catechol moieties. As such, this study focuses on denture fixatives, where a non-zinc-containing commercial-based formulation has been judiciously modified by a biomimetic catechol-inspired polymer, poly(3,4-dihydroxystyrene/styrene-alt-maleic acid) in a quest to modulate adhesive performance. In vitro studies, in a lap-shear configuration, revealed that the catechol-modified components were able to enhance adhesion to both the denture base and hydrated, functional oral tissue mimic, with the resulting mode of failure prominently being adhesive rather than cohesive. These characteristics are desirable in prosthodontic fixative applications, for which temporary adhesion must be maintained, with ultimately an adhesive failure from the mucosal tissue surface preferred. These insights provide an experimental platform in the design of future biomimetic adhesive systems. Statement of Significance: Mussel adhesive proteins have proven to be promising biomimetic adhesive candidates for soft tissues and here for the first time we have adapted marine adhesive technology into a denture fixative application. Importantly, we have incorporated a soft tissue mimic in our in vitro adhesion technique that more closely resembles the oral mucosa than previously studied substrates. The novel biomimetic-modified adhesives showed the ability to score the highest adhesive bonding out of all the formulations included in this study, across all moisture levels.This paper will be of major interest to the Acta Biomaterialia readership since the study has illustrated the potential of biomimetic principles in the design of effective prosthodontic tissue adhesives in a series of purpose-designed in vitro experiments in the context of the challenging features of the oral environment
Polyurethane membranes for encapsulation of implantable medical devices
EThOS - Electronic Theses Online ServiceGBUnited Kingdo
Data underpinning article "Tuneable Denture Adhesives using Biomimetic Principles for Enhanced Tissue Adhesion in Moist Environments"
Biomimetic dentin repair with a dual-analogue phosphate glass-polyacrylate paste : a proof-of-concept
Isopropyl myristate modified silicone as a potential new encapsulating material for implantable devices
Recommended from our members
Characterization, mechanistic analysis and improving the properties of denture adhesives.
OBJECTIVE:Denture adhesives are widely used to avoid the detachment and sliding of dentures. However, the adhesion properties can be affected by variation in mouth conditions such as the level of salivation. The objective of this study was to understand the effect of environmental conditions on the adhesion properties of a commercially available denture adhesive named as Poligrip® Free manufactured by GlaxoSmithKline Ltd., UK and to identify the reasons for the observed variation in its adhesion strength. METHODS:The failure mechanisms of denture adhesive have been assessed through using different physical, mechanical and thermal characterization experiments. All methods were used in different pH, temperatures, and salivation conditions and at the end, a strategy was proposed to overcome the failure of the paste in hyposalivation as well. RESULTS:In vitro models mimicking the denture gingival interface were designed to evaluate the adhesion properties of the investigated adhesive. Changes in the adhesion strength in response to three major factors related to the oral conditions including level of salivation, pH, and temperature were measured. The results of lap shear, tensile test, and internal interactions suggested a cohesion failure, where the lowest adhesion strength was due to hyposalivation. Fourier transform infrared spectroscopy (FTIR) and rheological analysis confirmed the importance of hydrogen bonds and hydration in the adhesion strength of the paste. SIGNIFICANCE:The investigated scenarios are widely observed in patient using denture adhesives and the clinical reports have indicated the inconsistency in adhesion strength of the commercial products. After identifying the potential reasons for such behavior, methods such as the addition of tripropylene glycol methyl ether (TPME) to enhance internal hydrogen bonds between the polymers are proposed to improve adhesion in the hyposalivation scenario
Polyurethane Membranes Modified with Isopropyl Myristate as a Potential Candidate for Encapsulating Electronic Implants: A Study of Biocompatibility and Water Permeability
Medical polyurethanes have shown good bio-stability and mechanical properties and have been used as coating for implantable medical devices. However, despite their excellent properties, they are relatively permeable to liquid water and water vapour which is a drawback for electronic implant encapsulation. In this study polyether polyurethanes with different soft segment molecular weights were modified by incorporating isopropyl myristate (IPM), as a hydrophobic modifying agent, and the effect of IPM on water resistant and biocompatibility of membranes were investigated. IPM changed the surface properties of the polyurethane film and reduced its surface energy. Polyurethane films were found to be stable with IPM concentrations of 1–5 wt% based upon their chemistry; however it leached out in BSA at higher concentrations. Though, low concentrations of IPM reduced both liquid water and water vapour permeability; at higher IPM content liquid permeability did not improved significantly. In general, the polyurethane materials showed much lower water permeability compared with currently used silicone packaging material for electronic implants. In addition, cytotoxicity assessment of IPM containing polyurethanes showed no evidence of cytotoxcity up to 5 wt% IPM
Isopropyl Myristate-Modified Polyether-Urethane Coatings as Protective Barriers for Implantable Medical Devices
Polyurethane films have potential applications in medicine, especially for packaging implantable medical devices. Although polyether-urethanes have superior mechanical properties and are biocompatible, achieving water resistance is still a challenge. Polyether based polyurethanes with two different molecular weights (PTMO1000, PTMO2000) were prepared from 4,4’-diphenylmethane diisocyanate and poly(tetra-methylene oxide). Polymer films were introduced using different concentrations (0.5-10 wt %) of isopropyl myristate lipid (IPM) as a non-toxic modifying agent. The physical and mechanical properties of these polymers were characterised using physical and spectroscopy techniques (FTIR, Raman, DSC, DMA, tensile testing). Water contact angle and water uptake of the membranes as a function of IPM concentration was also determined accordingly. The FTIR and Raman data indicate that IPM is dispersed in polyurethane at ≤ 2wt% and thermal analysis confirmed this miscibility to be dependent on soft segment length. Modified polymers showed increased tensile strength and failure strain as well as reduced water uptake by up to 24% at 1-2 wt% IPM