Optimization of Superplastic Forming Process of AA7075 Alloy for the Best Wall Thickness Distribution

This work aims to optimize the process parameters for improving the wall thickness distribution of the sheet superplastic forming process of AA7075 alloy. The considered factors include forming pressure p (MPa), deformation temperature T (°C), and forming time t (minutes), while the responses are the thinning degree of the wall thickness ε (%) and the relative height of the product h*. First, a series of experiments are conducted in conjunction with response surface method (RSM) to render the relationship between inputs and outputs. Subsequently, an analysis of variance (ANOVA) is conducted to verify the response significance and parameter effects. Finally, a numerical optimization algorithm is used to determine the best forming conditions. The results indicate that the thinning degree of 13.121% is achieved at the forming pressure of 0.7 MPa, the deformation temperature of 500°C, and the forming time of 31 minutes

Experiments and optimization for the WEDM process: A trade-off analysis between surface quality and production rate

This work addressed a parameter optimization to simultaneously decrease the root mean square roughness (Rq) as well as the thickness of the white layer (TW) and improve the material removal rate (MRR) for the wire electro-discharge machining (WEDM) of a stainless steel 304 (SS304). The factors considered are the discharge current (C), the gap voltage (VO), the pulse on time (POT), and the wire drum speed (SP). The interpolative radius basic function (RBF) is applied to show the correlation between the varied factors and WEDM performances measured. The optimal selection is chosen using the multi-objective particle swarm optimization (MOPSO). Moreover, a traditional one using the response surface method (RSM) and desirability approach (DA) is adopted to compare the working efficiency of two optimization techniques. The results showed that the optimal findings of the C, POT, VO, and SP are 5.0 A, 1.0 µs, 61.0 V, and 8.0 m/min, respectively. The values of the Rq and TW are decreased by approximately 33.33% and 23.53%, respectively, while the MRR enhances 47.42% at the optimal selection, as compared to the common values used. The BRF-MOPSO can provide better performance than the RSM-DA

Students’ Perceptions on Blended Synchronous Learning in the Postcrisis Era

With the severe impacts of the Covid-19 pandemic, the educational systems have to be reformed and evolved. Blended synchronous learning has become an attractive tendency in education worldwide as the technology has mushroomed recently and attracts a vast number of users and researchers. Therefore, the current study was conducted to investigate students’ overall perceptions of blended synchronous learning as well as its benefits and challenges. 163 participants in the study have experienced ENT courses in a blended synchronous learning environment for 105 hours within 7 weeks. The instrument employed in the quantitative phase was 27 items adapted from studies by Rahman et al. (2015), López-Pérez et al. (2011), and Wu et al. (2010). Additionally, semi-structured interviews were used to have a deeper understanding of the research issues. Results indicate that more than half of participants had good perceptions about the blended synchronous learning environment and perceived various benefits as well as challenges of it. Moreover, these findings are supplemented with illustrative quotes from interview transcripts to compare and contrast with previous findings reported in the literature, and therefore this study contributes to the field by offering the learners\u27 voices

LAND USE CHANGE AND RELATED PROBLEMS UNDER URBANIZATION IN SUBURBAN AREA OF HANOI CITY (A CASE STUDY OF HOANG LIET COMMUNE, THANH TRI DISTRICT)

Joint Research on Environmental Science and Technology for the Eart

Multicriteria Evaluation Of Tourism Potential In The Central Highlands Of Vietnam: Combining Geographic Information System (GIS), Analytic Hierarchy Process (AHP) And Principal Component Analysis (PCA)

Tourism potential provides an indication for the tourism development opportunities of regions and sites. This paper deals with a multicriteria evaluation of the tourism potential in the Central Highlands of Vietnam. The study area is located in the Southeast Asian monsoon tropical climatic zone, and offers both natural and cultural tourism resources. GIS-based cost distance analysis was used to calculate the travel time along the road and using other transportation networks. Then an Analytic Hierarchy Process (AHP) was applied to determine a weighting coefficient for each criterion in multicriteria evaluation. Principal Component Analysis (PCA) was processed next to AHP, allowing combination of the internal and external tourism potentials of the considered sites. Both AHP and PCA approaches were based on a certain number of alternatives, and take multiple criteria and conflicting objectives into consideration. The results show that the Central Highlands have considerable potential for tourism development at 99 potential eco-tourism sites and 45 potential cultural tourism sites. However, the region is now faced with poor tourism infrastructure with low external potential. An improvement of tourism infrastructure, service quality, and strengthened linkages with other tourist sites is indicated to diversify the tourism products and increase the attractiveness of regional destinations

Slip Resistance Test Apparatus of Synthetic Rubber Trackpad on Photovoltaic Surface

The increasing development of the solar energy industry in many countries has led to a rising frequency of human and robot presence in this area. To ensure occupational safety, various protective equipment, including rubber material, is commonly used for slip resistance while moving on the surface of solar PV panels. Therefore, the slip resistance test apparatus is built for testing the slip resistance between the synthetic rubber trackpad and the photovoltaic panel (PV) surface. Synthetic rubber is a man-made material, so it is difficult to control the parameters of its mechanical and chemical properties absolutely. Variations in wet/dry working conditions or Shore hardness are factors that make slip computation more challenging. Therefore, an apparatus with the principle of converting the reciprocating motion of the screw and the casters into the rotation of the hinge is introduced to adjust the tilt angle of the upper surface, detect and evaluate the slippage of the rubber trackpad by sensors. Some parameters related to accuracy such as vibration and theoretical-empirical assessment, are also mentioned. In addition to designing a reliable apparatus, the article also succeeded in providing a safety standard for synthetic rubber with Shore A30-A40 when moving on PV surfaces.Comment: 4 pages, 10 figures, The 20th International Conference on Ubiquitous Robots (UR 2023

MORPHOLOGICAL AWARENESS OF STUDENTS MAJORING IN ENGLISH STUDIES TOWARDS VOCABULARY LEARNING

For those learning a second language, vocabulary plays a vital role in mastering the new one, and possessing a colossal vocabulary is extremely necessary. The paper aims to look into and assess students' awareness of morphology and the effectiveness of this approach through vocabulary learning. The subjects in this study were juniors majoring in English at a university in the south of Vietnam. The test, questionnaire, and interview were the three instruments used in this study to triangulate the results. A total of 49 students majoring in English Studies took the test, 40 students completed the questionnaire, and four students participated in an interview to evaluate their proficiency and morphological knowledge. The results of the study showed that students' awareness levels were average, and they were knowledgeable enough to employ this strategy for acquiring vocabulary. Additionally, it also enables students to comprehend morphology's benefits and drawbacks during their learning vocabulary process.  Article visualizations