10 research outputs found
Utilisation des infrastructures de la Grille EGI pour les simulations de CTA
Utilisation des infrastructures de la Grille EGI pour les simulations de CT
The On-Site Analysis of the Cherenkov Telescope Array
The Cherenkov Telescope Array (CTA) observatory will be one of the largest
ground-based very high-energy gamma-ray observatories. The On-Site Analysis
will be the first CTA scientific analysis of data acquired from the array of
telescopes, in both northern and southern sites. The On-Site Analysis will have
two pipelines: the Level-A pipeline (also known as Real-Time Analysis, RTA) and
the level-B one. The RTA performs data quality monitoring and must be able to
issue automated alerts on variable and transient astrophysical sources within
30 seconds from the last acquired Cherenkov event that contributes to the
alert, with a sensitivity not worse than the one achieved by the final pipeline
by more than a factor of 3. The Level-B Analysis has a better sensitivity (not
be worse than the final one by a factor of 2) and the results should be
available within 10 hours from the acquisition of the data: for this reason
this analysis could be performed at the end of an observation or next morning.
The latency (in particular for the RTA) and the sensitivity requirements are
challenging because of the large data rate, a few GByte/s. The remote
connection to the CTA candidate site with a rather limited network bandwidth
makes the issue of the exported data size extremely critical and prevents any
kind of processing in real-time of the data outside the site of the telescopes.
For these reasons the analysis will be performed on-site with infrastructures
co-located with the telescopes, with limited electrical power availability and
with a reduced possibility of human intervention. This means, for example, that
the on-site hardware infrastructure should have low-power consumption. A
substantial effort towards the optimization of high-throughput computing
service is envisioned to provide hardware and software solutions with
high-throughput, low-power consumption at a low-cost.Comment: In Proceedings of the 34th International Cosmic Ray Conference
(ICRC2015), The Hague, The Netherlands. All CTA contributions at
arXiv:1508.0589
A prototype for the real-time analysis of the Cherenkov Telescope Array
The Cherenkov Telescope Array (CTA) observatory will be one of the biggest ground-based very-high-energy (VHE) Îł- ray observatory. CTA will achieve a factor of 10 improvement in sensitivity from some tens of GeV to beyond 100 TeV with respect to existing telescopes. The CTA observatory will be capable of issuing alerts on variable and transient sources to maximize the scientific return. To capture these phenomena during their evolution and for effective communication to the astrophysical community, speed is crucial. This requires a system with a reliable automated trigger that can issue alerts immediately upon detection of Îł-ray flares. This will be accomplished by means of a Real-Time Analysis (RTA) pipeline, a key system of the CTA observatory. The latency and sensitivity requirements of the alarm system impose a challenge because of the anticipated large data rate, between 0.5 and 8 GB/s. As a consequence, substantial efforts toward the optimization of highthroughput computing service are envisioned. For these reasons our working group has started the development of a prototype of the Real-Time Analysis pipeline. The main goals of this prototype are to test: (i) a set of frameworks and design patterns useful for the inter-process communication between software processes running on memory; (ii) the sustainability of the foreseen CTA data rate in terms of data throughput with different hardware (e.g. accelerators) and software configurations, (iii) the reuse of nonreal- time algorithms or how much we need to simplify algorithms to be compliant with CTA requirements, (iv) interface issues between the different CTA systems. In this work we focus on goals (i) and (ii)
The Cherenkov Telescope Array production system for data-processing and Monte Carlo simulation
The Cherenkov Telescope Array (CTA) is the next-generation instrument in the field of very high energy gamma-ray astronomy. It will be composed of two arrays of Imaging Atmospheric Cherenkov Telescopes, located at La Palma (Spain) and Paranal (Chile). The construction of CTA has just started with the installation of the first telescope on site at La Palma and the first data expected by the end of 2018. The scientific operations should begin in 2022 for a duration of about 30 years. The overall amount of data produced during these operations is around 27 PB per year. The associated computing power for data processing and Monte Carlo (MC) simulations is of the order of hundreds of millions of CPU HS06 hours per year. In order to cope with these high computing requirements, we have developed a production system prototype based on the DIRAC framework, that we have intensively exploited during the past 6 years to handle massive MC simulations on the grid for the CTA design and prototyping phases. CTA workflows are composed of several inter-dependent steps, which we used to handle separately within our production system. In order to fully automatize the whole workflows execution, we have partially revised the production system by further enhancing the data-driven behavior and by extending the use of meta-data to link together the different steps of a workflow. In this contribution we present the application of the production system to the last years MC campaigns as well as the recent production system evolution, intended to obtain a fully data-driven and automatized workflow execution for efficient processing of real telescope data
The Cherenkov Telescope Array production system for data-processing and Monte Carlo simulation
The Cherenkov Telescope Array (CTA) is the next-generation instrument in the field of very high energy gamma-ray astronomy. It will be composed of two arrays of Imaging Atmospheric Cherenkov Telescopes, located at La Palma (Spain) and Paranal (Chile). The construction of CTA has just started with the installation of the first telescope on site at La Palma and the first data expected by the end of 2018. The scientific operations should begin in 2022 for a duration of about 30 years. The overall amount of data produced during these operations is around 27 PB per year. The associated computing power for data processing and Monte Carlo (MC) simulations is of the order of hundreds of millions of CPU HS06 hours per year. In order to cope with these high computing requirements, we have developed a production system prototype based on the DIRAC framework, that we have intensively exploited during the past 6 years to handle massive MC simulations on the grid for the CTA design and prototyping phases. CTA workflows are composed of several inter-dependent steps, which we used to handle separately within our production system. In order to fully automatize the whole workflows execution, we have partially revised the production system by further enhancing the data-driven behavior and by extending the use of meta-data to link together the different steps of a workflow. In this contribution we present the application of the production system to the last years MC campaigns as well as the recent production system evolution, intended to obtain a fully data-driven and automatized workflow execution for efficient processing of real telescope data
A system architecture approach for the Cherenkov telescope array (Conference Presentation)
International audienceThe Cherenkov Telescope Array (CTA) is planned as the first ground-based gamma-ray observatory open to the worldwide physics community. The CTA Observatory (CTAO) will consist of arrays of up to 100 telescopes at two sites, one in the Northern and one in the Southern hemisphere, as well as complex and distributed software systems for an efficient operation of the arrays and for the management and scientific exploitation of the CTA data. One of the challenges in the design of such a large installation is to ensure that all the systems that compose the CTAO have well-defined scope and identified interfaces, allowing it to work reliably as a seamless whole. In this contribution, we provide an overview on a methodology for a model-based architecture approach, tailored to the CTA needs, with the main goals to (i) capture the stakeholder interactions with the CTAO, (ii) capture the processes and activities that will be required to successfully operate the CTAO and meet stakeholder expectations, including science operations and maintenance, (iii) agree on a functional decomposition of the CTAO into (sub-)systems and an allocation of the functionality to the (sub-)systems to assign responsibilities and identify interfaces. To accomplish this, we have developed an architecture approach based on process-based system scoping and using a notation based on the SysML and UML formalisms. The different views of the architecture model are presented, each focusing on different aspects of the CTAO. These views contain, among others, stakeholders and project objectives, activity diagrams for describing the CTAO processes, the context and structure of the CTAO system and sub-systems, and their relationships. In this contribution, we will focus on the methodology with a few selected examples
A prototype for the real-time analysis of the Cherenkov Telescope Array
The Cherenkov Telescope Array (CTA) observatory will be one of the biggest ground-based very-high-energy (VHE) γ- ray observatory. CTA will achieve a factor of 10 improvement in sensitivity from some tens of GeV to beyond 100 TeV with respect to existing telescopes. The CTA observatory will be capable of issuing alerts on variable and transient sources to maximize the scientific return. To capture these phenomena during their evolution and for effective communication to the astrophysical community, speed is crucial. This requires a system with a reliable automated trigger that can issue alerts immediately upon detection of γ-ray flares. This will be accomplished by means of a Real-Time Analysis (RTA) pipeline, a key system of the CTA observatory. The latency and sensitivity requirements of the alarm system impose a challenge because of the anticipated large data rate, between 0.5 and 8 GB/s. As a consequence, substantial efforts toward the optimization of highthroughput computing service are envisioned. For these reasons our working group has started the development of a prototype of the Real-Time Analysis pipeline. The main goals of this prototype are to test: (i) a set of frameworks and design patterns useful for the inter-process communication between software processes running on memory; (ii) the sustainability of the foreseen CTA data rate in terms of data throughput with different hardware (e.g. accelerators) and software configurations, (iii) the reuse of nonreal- time algorithms or how much we need to simplify algorithms to be compliant with CTA requirements, (iv) interface issues between the different CTA systems. In this work we focus on goals (i) and (ii). © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only