Experimental Contribution Concerning the Effect of Carbonation Reaction on the Oxygen Permeability of Concrete

Reinforced concrete (RC) structures are prone to steel corrosion that affects their service life. The two main processes, involved in the destruction of the steel-concrete self-protection are the carbonation and the penetration of chlorides. Understanding the behavior of these degrading phenomena is of paramount importance to enhance the field of predicting the service life of RC structures. In this investigation, a total number of 54 cylindrical specimens (150×100 mm2) and 54 cubic specimens (100×100 mm2) from six different concrete mixtures covering a range of water-to-cement ratio (w/c) between 0.76 and 0.36 was tested. The effect of the carbonation reaction on the concrete oxygen permeability (assessed by a recent method), compressive strength, and weight has been investigated. The obtained data were analyzed to establish correlations to predict the oxygen permeability of non-carbonated concrete with concrete characteristics such as w/c ratio and compressive strength. Test results show good correlations. The results of the accelerated carbonation test showed that compressive strength increases with carbonation. Concerning the effect of carbonation reaction on concrete oxygen permeability which is the main goal of this paper, test results showed that carbonation considerably affects the concrete permeability. This result was observed for all concrete mixtures. Moreover, the relationship between carbonation depth and concrete oxygen permeability in ordinary concrete differed than high performance concrete. Furthermore, the increase of the oxygen permeability observed after the carbonation has been justified by the analysis of the Scanning Electron Microscopy images that show the formation of larger pores in comparison with non-carbonated concrete

“Bone-shot fracture” – An unusual iliac wing fracture caused by a projectile of autologous bone fragment. A case report

Case: A young adult male sustained a high-energy crash suffering multiple injuries including a comminuted right femoral shaft fracture and an ipsilateral iliac wing fracture. The iliac fracture was caused by a femoral fragment which was projected and pierced the iliac wing. The patient underwent surgery with retrieval of the femoral fragment and fixation of the iliac and femoral fractures. The lesions healed uneventfully. Conclusion: This is the first reported case of an iliac fracture caused by a projectile of autologous bone. High-energy trauma may present unusual or never seen injury patterns to the trauma surgeon

Porphyrin-silica gel hybrids as effective and selective copper(II) adsorbents from industrial wastewater

Porphyrins are an important class of ligands with a tremendous ability to capture metal ions closely related to the rich coordination chemistry of porphyrins. Herein we use this characteristic to develop silica gel grafted derivatives for water remediation applications. Therefore, two porphyrin derivatives, one with three and the other with four mercaptopyridyl units were grafted on silica gel functionalized with 3-aminopropyltriethoxysilane. The new adsorbents Si3PyS and Si4PyS were characterized using a suitable set of techniques confirming the covalent attachment of the porphyrins to the silica surface. Additionally, microscopy and N2 adsorption analysis confirmed the structural integrity and preservation of the mesoporous structure of Si during surface modification. The results show that both hybrid materials exhibit good chemical and thermal stability and an outstanding Cu2+ removal capability, with a chemical adsorption capacity of 176.32 mg g–1 and 184.16 mg g–1, respectively. These materials have also been used in real water and industrial wastewater samples with minimal interference in their adsorption capabilities. Density Functional Theory calculations were performed to confirm the good performance of the hybrid materials Si3PyS and Si4PyS towards metal ions. The functionalization of silica surface with porphyrin-based ligands bearing additional binding motifs drastically improves the adsorption capability of the new hybrids towards metal ions. The presence of pyridyl units brings a meaningful advantage, since both porphyrin core and appended pyridyl groups are able of binding Cu2+ ions with high affinity, contributing to the enhancement of the chelating features of the adsorbents prepared when compared with other ligands supported in silica-based materials.publishe

Prediction of bioactive compounds activity against wood contaminant fungi using artificial neural networks

Biopesticides based on natural endophytic bacteria to control plant diseases are an ecological alternative to the chemical treatments. Bacillus species produce a wide variety of metabolites with biological activity like iturinic lipopeptides. This work addresses the production of biopesticides based on natural endophytic bacteria, isolated from Quercus suber. Artificial Neural Networks were used to maximize the percentage of inhibition triggered by antifungal activity of bioactive compounds produced by Bacillus amyloliquefaciens. The active compounds, produced in liquid cultures, inhibited the growth of fifteen fungi and exhibited a broader spectrum of antifungal activity against surface contaminant fungi, blue stain fungi and phytopathogenic fungi. A 19-7-6-1 neural network was selected to predict the percentage of inhibition produced by antifungal bioactive compounds. A good match among the observed and predicted values was obtained with the R2 values varying between 0.9965 – 0.9971 and 0.9974 – 0.9989 for training and test sets. The 19-7-6-1 neural network was used to establish the dilution rates that maximize the production of antifungal bioactive compounds, namely 0.25 h-1 for surface contaminant fungi, 0.45 h-1 for blue stain fungi and between 0.30 and 0.40 h-1 for phytopathogenic fungi. Artificial neural networks show great potential in the modelling and optimization of these bioprocesses.Les biopesticides à base de bactéries endophytes naturelles pour lutter contre les maladies des plantes constituent une alternative écologique aux traitements chimiques. Les espèces de Bacillus produisent une grande variété de métabolites biologiquement actifs tels que les lipopeptides ituriniques. Cette étude porte sur la production de biopesticides par des bactéries endophytes naturelles isolées du Quercus suber L. Des réseaux neuronaux artificiels ont été utilisés pour maximiser le pourcentage d’inhibition provoquée par l’activité antifongique des composés bioactifs produits par Bacillus amyloliquefaciens. Les composés actifs, produits en culture liquide, ont inhibé la croissance de 15 champignons et avaient un spectre d’activé antifongique plus large contre les contaminants fongiques de surface, les champignons de bleuissement et les champignons phytopathogènes. Un réseau neuronal 19-7-6-1 a été choisi pour prédire le pourcentage d’inhibition produit par les composés bioactifs antifongiques. Une bonne concordance entre les valeurs observées et prédites a été obtenue; les valeurs de R2 variaient de 0,9965 a` 0,9971 et de 0,9974 a` 0,9989 pour les bases d’apprentissage et de test. Le réseau neuronal 19-7-6-1 a été utilisé pour établir les taux de dilution qui maximisent la production des composés bioactifs antifongiques, nommément 0,25 h−1 pour les contaminants fongiques de surface, 0,45 h−1 pour les champignons de bleuissement et entre 0,30 et 0,40 h−1 pour les champignons phytopathogènes. Les réseaux neuronaux artificiels ont un potentiel élevé pour modéliser et optimiser ces processus biologiques

Gene surgery

Gene therapy became in last decade a new emerging therapeutic era showing promising results against different diseases such as cancer, cardiovascular diseases, diabetes, and neurological disorders. Recently, the genome editing technique for eukaryotic cells called CRISPR-Cas (Clustered Regulatory Interspaced Short Palindromic Repeats) has enriched the field of gene surgery with enhanced applications. In the present review, we summarized the different applications of gene surgery for treating human diseases such as cancer, diabetes, nervous, and cardiovascular diseases, besides the molecular mechanisms involved in these important effects. Several studies support the important therapeutic applications of gene surgery in a large number of health disorders and diseases including β-thalassemia, cancer, immunodeficiencies, diabetes, and neurological disorders. In diabetes, gene surgery was shown to be effective in type 1 diabetes by triggering different signaling pathways. Furthermore, gene surgery, especially that using CRISPR-Cas possessed important application on diagnosis, screening and treatment of several cancers such as lung, liver, pancreatic and colorectal cancer. Nevertheless, gene surgery still presents some limitations such as the design difficulties and costs regarding ZFNs (Zinc Finger Nucleases) and TALENs (Transcription Activator-Like Effector Nucleases) use, off-target effects, low transfection efficiency, in vivo delivery-safety and ethical issues

Determination of catechin in green tea using a catechol oxidase biomimetic sensor

A catechol oxidase biomimetic sensor, based on a novel copper(II) complex, was developed for the determination of catechin in green tea and the results were compared with those obtained by capillary electrophoresis. The dinuclear copper(II) complex, [Cu2(HL)(µ-CH3COO)](ClO4), containing the ligand N,N-[bis-(2-pyridylmethyl)]-N',N'-[(2-hydroxybenzyl)(2-hydroxy-3,5-di-tert-butylbenzyl)]-1,3-propanediamine-2-ol (H3L), was synthesized and characterized by IR, ¹H NMR and elemental analysis. The best conditions for the optimization of the biomimetic sensor were established by square wave voltammetry. The best performance for this sensor was obtained in 75:15:10% (m/m/m) of the graphite powder:nujol:copper(II) complex, 0.05 mol L-1 phosphate buffer solution (pH 7.5) and frequency, pulse amplitude, scan increment at 30 Hz, 80 mV, 3.3 mV, respectively. The analytical curve was linear in the concentration range 4.95 × 10-6 to 3.27 × 10-5 mol L-1 (r = 0.9993) with a detection limit of 2.8 × 10-7 mol L-1. This biomimetic sensor demonstrated long-term stability (9 months; 800 determinations) and reproducibility with a relative standard deviation of 3.5%. The recovery of catechin from green tea samples ranged from 93.8 to 106.9% and the determination, compared with that obtained using capillary electrophoresis, was found to be acceptable at the 95% confidence level

Dynamic studies of biomimetic coated polycaprolactone nanofiber meshes as bone extracellular matrix analogues

This work aimed at studying the effects of dynamic culture conditions and biomimetic coating on bone cells grown on nanofiber meshes. In our previous work, biomimetic calcium phosphate coated polycaprolactone nanofibre meshes (BCP-NM) proved to be more efficient for supporting cell attachment and proliferation under static conditions, when compared to polycaprolactone nanofibre meshe (PCL-NM). However, no studies on the influence of bioreactors on the behaviour of cells cultivated on these materials were developed so far. [...]info:eu-repo/semantics/publishedVersio

Renal tumouroids: challenges of manufacturing 3D cultures from patient derived primary cells.

Recent advancements in 3D in vitro culture have allowed for the development of cancer tissue models which accurately recapitulate the tumour microenvironment. Consequently, there has been increased innovation in therapeutic drug screening. While organoid cultures show great potential, they are limited by the time scale of their growth in vitro and the dependence upon commercial matrices, such as Matrigel, which do not allow for manipulations of their composition or mechanical properties. Here, we show a straightforward approach for the isolation and culture of primary human renal carcinoma cells and matched non-affected kidney. This approach does not require any specific selection for cancer cells, and allows for their direct culture in amenable 3D collagen-based matrices, with the preservation of cancer cells as confirmed by NGS sequencing. This method allows for culture of patient-derived cancer cells in 3D microenvironment, which can be used for downstream experimentation such as investigation of cell-matrix interaction or drug screening. [Abstract copyright: © 2022. Crown.

Dynamic culture of osteogenic cells in biomimetically coated poly(caprolactone) nanofibre mesh constructs

In our previous work, biomimetic calcium phosphate-coated poly(caprolactone) nanofibre meshes (BCP-NMs) were demonstrated to be more effective for supporting cell attachment and proliferation under static conditions, when compared with poly(caprolactone) nanofibre meshes (PCL-NMs). In many applications, in vitro cultivation of constructs using bioreactors that support efficient nutrition of cells has appeared as an important step toward the development of functional grafts. This work aimed at studying the effects of dynamic culture conditions and biomimetic coating on bone cells grown on the nanofibre meshes. BCP-NM and PCL-NM were seeded with osteoblast-like cells (MG63--human osteosarcoma-derived cell line). The cell-seeded constructs were cultured within a rotating bioreactor that simulated microgravity, at a fixed rotating speed, for different time periods, and then characterized. Cell morphology, viability, and phenotype were assessed. PCL-NM constructs presented a higher number of dead cells than BCP-NM constructs. Under dynamic conditions, the production of proteins associated with the extracellular matrix of bone was higher on BCP-NM constructs than in the PCL-NM ones, which indicates that coated samples may provide cells with a better environment for tissue growth. It is suggested that improved mass transfer in the bioreactor in combination with the appropriate substrate were decisive factors for this highly positive outcome for generating bone.This work was developed under the scope of the EU Project Network of Excellence "Expertissues'' (NMP3-CT-2004-500283) and supported by Alea jacta est Marie Curie Actions (MEST-CT-2004-008104). M. Alves da Silva would like to acknowledge the Portuguese Foundation for Science and Technology for her grant (SFRH-BD-28708-2006). Jose V. Araujo is grateful to S. Rathbone, H. Sura, I. Wimpenny, I. Dublon, G. Jones, and E. D. Pinho for useful technical discussions