Towards conductive textiles: coating polymeric fibres with graphene

This is the final version of the article. Available from Springer Nature via the DOI in this record.Conducting fibres are essential to the development of e-textiles. We demonstrate a method to make common insulating textile fibres conductive, by coating them with graphene. The resulting fibres display sheet resistance values as low as 600 Ωsq−1, demonstrating that the high conductivity of graphene is not lost when transferred to textile fibres. An extensive microscopic study of the surface of graphene-coated fibres is presented. We show that this method can be employed to textile fibres of different materials, sizes and shapes, and to different types of graphene. These graphene-based conductive fibres can be used as a platform to build integrated electronic devices directly in textiles.The authors would like to thank Dr Yat-Tarng (Tommy) Shyng for the non-contact scanning measurements and would like to acknowledge financial support from the UK Engineering and Physical Sciences Research Council (EPSRC grants EP/J000396/1, EP/K017160, EP/K010050/1, EP/G036101/1, EP/M002438/1, EP/M001024/1), the Royal Society Travel Exchange Grants 2012 and 2013, the European Commission FP7-ICT-2013-613024-GRASP and H2020-MSCA-IF-2015-704963, and the Portuguese Foundation for Science and Technology (FCT), co-financed by FEDER (PT2020 Partnership Agreement), under contracts PTDC/QEQ-SUP/1413/2012, RECI/CTM-CER/0336/2012, IF/01088/2014, BI/UI89/2015, POCI-01-0145-FEDER-007679 (UID/CTM/50011/2013) and COMPETE:FCOMP-01-0124-FEDER-027465

Long-term risk of mortality after acute kidney injury in patients with sepsis: a contemporary analysis

<p>Abstract</p> <p>Background</p> <p>Acute kidney injury (AKI) is associated with increased short-term mortality of septic patients; however, the exact influence of AKI on long-term mortality in such patients has not yet been determined.</p> <p>Methods</p> <p>We retrospectively evaluated the impact of AKI, defined by the "Risk, Injury, Failure, Loss of kidney function, End-stage kidney disease" (RIFLE) classification based on creatinine criteria, on 2-year mortality in a cohort of 234 hospital surviving septic patients who had been hospitalized at the Infectious Disease Intensive Care Unit of our Hospital.</p> <p>Results</p> <p>Mean-follow-up was 21 ± 6.4 months. During this period, 32 patients (13.7%) died. At 6 months, 1 and 2 years of follow-up, the cumulative probability of death of patients with previous AKI was 8.3, 16.9 and 34.2%, respectively, as compared with 2.2, 6 and 8.9% in patients without previous AKI (log-rank, P < 0.0001). In the univariate analysis, age (hazard ratio 1.4, 95% CI 1.2-1.7, P < 0.0001), as well as pre-existing cardiovascular disease (hazard ratio 3.6, 95% CI 1.4-9.4, P = 0.009), illness severity as evaluated by nonrenal APACHE II (hazard ratio 1.3, 95% CI 1.1-1.6, P = 0.002), and previous AKI (hazard ratio 4.2, 95% CI 2.1-8.5, P < 0.0001) were associated with increased 2-year mortality, while gender, race, pre-existing hypertension, cirrhosis, HIV infection, neoplasm, and baseline glomerular filtration rate did not. In the multivariate analysis, however, only previous AKI (hazard ratio 3.2, 95% CI 1.6-6.5, P = 0.001) and age (hazard ratio 1.4, 95% CI 1.2-1.6, P < 0.0001) emerged as independent predictors of 2-year mortality.</p> <p>Conclusions</p> <p>Acute kidney injury had a negative impact on long-term mortality of patients with sepsis.</p

Micromechanical study of the load transfer in a polycaprolactone-collagen hybrid scaffold when subjected to unconfined and confined compression

Scaffolds are used in diverse tissue engineering applications as hosts for cell proliferation and extracellular matrix formation. One of the most used tissue engineering materials is collagen, which is well known to be a natural biomaterial, also frequently used as cell substrate, given its natural abundance and intrinsic biocompatibility. This study aims to evaluate how the macroscopic biomechanical stimuli applied on a construct made of polycaprolactone scaffold embedded in a collagen substrate translate into microscopic stimuli at the cell level. Eight poro-hyperelastic finite element models of 3D printed hybrid scaffolds from the same batch were created, along with an equivalent model of the idealized geometry of that scaffold. When applying an 8% confined compression at the macroscopic level, local fluid flow of up to 20 [Formula: see text]m/s and octahedral strain levels mostly under 20% were calculated in the collagen substrate. Conversely unconfined compression induced fluid flow of up to 10 [Formula: see text]m/s and octahedral strain from 10 to 35%. No relevant differences were found amongst the scaffold-specific models. Following the mechanoregulation theory based on Prendergast et al. (J Biomech 30:539-548, 1997. https://doi.org/10.1016/S0021-9290(96)00140-6 ), those results suggest that mainly cartilage or fibrous tissue formation would be expected to occur under unconfined or confined compression, respectively. This in silico study helps to quantify the microscopic stimuli that are present within the collagen substrate and that will affect cell response under in vitro bioreactor mechanical stimulation or even after implantation

Synthetic sex pheromone in a long-lasting lure attracts the visceral leishmaniasis vector, lutzomyia longipalpis, for up to 12 weeks in Brazil

Current control methodologies have not prevented the spread of visceral leishmaniasis (VL) across Brazil. Here, we describe the development of a new tool for controlling the sand fly vector of the disease: a long-lasting lure, which releases a synthetic male sex pheromone, attractive to both sexes of Lutzomyia longipalpis. This device could be used to improve the effectiveness of residual insecticide spraying as a means of sand fly control, attracting L. longipalpis to insecticide-treated animal houses, where they could be killed in potentially large numbers over a number of weeks. Different lure designs releasing the synthetic pheromone (±)-9-methylgermacrene-B (CAS 183158-38-5) were field-tested in Araçatuba, São Paulo (SP). Experiments compared numbers of sand flies caught overnight in experimental chicken sheds with pheromone lures, to numbers caught in control sheds without pheromone. Prototype lures, designed to last one night, were first used to confirm the attractiveness of the pheromone in SP, and shown to attract significantly more flies to test sheds than controls. Longer-lasting lures were tested when new, and at fortnightly intervals. Lures loaded with 1 mg of pheromone did not attract sand flies for more than two weeks. However, lures loaded with 10 mg of pheromone, with a releasing surface of 15 cm2 or 7.5 cm2, attracted female L. longipalpis for up to ten weeks, and males for up to twelve weeks. Approximately five times more sand flies were caught with 7.5 cm2 10 mg lures when first used than occurred naturally in non-experimental chicken resting sites. These results demonstrate that these lures are suitably long-lasting and attractive for use in sand fly control programmes in SP. To our knowledge, this is the first sex pheromone-based technology targeting an insect vector of a neglected human disease. Further studies should explore the general applicability of this approach for combating other insect-borne diseases

Spatial Re-Establishment Dynamics of Local Populations of Vectors of Chagas Disease

Chagas disease is transmitted by blood-sucking bugs (vectors) and presents a severe public health threat in the Americas. Worldwide there are approximately 10 million people infected with Chagas disease, a disease for which there is currently no effective cure. Vector suppression is the main strategy to control the spread of this disease. Unfortunately, the vectors have been resurgent in some areas. It is important to understand the dynamics of reinfestation where it occurs. Here we show how different models fitted to patch-level bug infestation data can elucidate different aspects of re-establishment dynamics. Our results demonstrated a 6-month time lag between detection of a new infestation and dispersal events, seasonality in dispersal rates and effects of previous vector infestation on subsequent vector establishment rates. In addition we provide estimates of dispersal distances and the effect of insecticide spraying on rates of vector re-establishment. While some of our results confirm previous findings, the effects of season and previous infestation on bug establishment challenge our current understanding of T. infestans ecology and highlight important gaps in our knowledge of T. infestans dispersal