Comparison of native and non-native phone imitation by English and Spanish speakers

Experiments investigating phonetic convergence in conversation often focus on interlocutors with similar phonetic inventories. Extending these experiments to those with dissimilar inventories requires understanding the capacity of speakers to imitate native and non-native phones. In the present study, we tested native Spanish and native English speakers to determine whether imitation of non-native tokens differs qualitatively from imitation of native tokens. Participants imitated a [ba]–[pa] continuum that varied in VOT from −60 ms (prevoiced, Spanish [b]) to +60 ms (long lag, English [p]) such that the continuum consisted of some tokens that were native to Spanish speakers and some that were native to English speakers. Analysis of the imitations showed two critical results. First, both groups of speakers demonstrated sensitivity to VOT differences in tokens that fell within their native regions of the VOT continuum (prevoiced region for Spanish and long lag region for English). Secondly, neither group of speakers demonstrated such sensitivity to VOT differences among tokens that fell in their non-native regions of the continuum. These results show that, even in an intentional imitation task, speakers cannot accurately imitate non-native tokens, but are clearly flexible in producing native tokens. Implications of these findings are discussed with reference to the constraints on convergence in interlocutors from different linguistic backgrounds

Geodesics for Efficient Creation and Propagation of Order along Ising Spin Chains

Experiments in coherent nuclear and electron magnetic resonance, and optical spectroscopy correspond to control of quantum mechanical ensembles, guiding them from initial to final target states by unitary transformations. The control inputs (pulse sequences) that accomplish these unitary transformations should take as little time as possible so as to minimize the effects of relaxation and decoherence and to optimize the sensitivity of the experiments. Here we give efficient syntheses of various unitary transformations on Ising spin chains of arbitrary length. The efficient realization of the unitary transformations presented here is obtained by computing geodesics on a sphere under a special metric. We show that contrary to the conventional belief, it is possible to propagate a spin order along an Ising spin chain with coupling strength J (in units of Hz), significantly faster than 1/(2J) per step. The methods presented here are expected to be useful for immediate and future applications involving control of spin dynamics in coherent spectroscopy and quantum information processing

One-neutron knockout from 57^{57}Ni

The single-particle structure of $^{57}$Ni and level structure of $^{56}$Ni were investigated with the \mbox{$^{9}$Be ($^{57}$Ni,$^{56}$Ni+$\gamma$)$\it{X}$} reaction at 73 MeV/nucleon. An inclusive cross section of 41.4(12) mb was obtained for the reaction, compared to a theoretical prediction of 85.4 mb, hence only 48(2)% of the theoretical cross section is exhausted. This reduction in the observed spectroscopic strength is consistent with that found for lighter well-bound nuclei. One-neutron removal spectroscopic factors of 0.58(11) to the ground state and 3.7(2) to all excited states of $^{56}$Ni were deduced.Comment: Phys. Rev. C, accepte

Optimal Control of Quantum Dissipative Dynamics: Analytic solution for cooling the three level Λ\Lambda system

We study the problem of optimal control of dissipative quantum dynamics. Although under most circumstances dissipation leads to an increase in entropy (or a decrease in purity) of the system, there is an important class of problems for which dissipation with external control can decrease the entropy (or increase the purity) of the system. An important example is laser cooling. In such systems, there is an interplay of the Hamiltonian part of the dynamics, which is controllable and the dissipative part of the dynamics, which is uncontrollable. The strategy is to control the Hamiltonian portion of the evolution in such a way that the dissipation causes the purity of the system to increase rather than decrease. The goal of this paper is to find the strategy that leads to maximal purity at the final time. Under the assumption that Hamiltonian control is complete and arbitrarily fast, we provide a general framework by which to calculate optimal cooling strategies. These assumptions lead to a great simplification, in which the control problem can be reformulated in terms of the spectrum of eigenvalues of $\rho$, rather than $\rho$ itself. By combining this formulation with the Hamilton-Jacobi-Bellman theorem we are able to obtain an equation for the globaly optimal cooling strategy in terms of the spectrum of the density matrix. For the three-level $\Lambda$ system, we provide a complete analytic solution for the optimal cooling strategy. For this system it is found that the optimal strategy does not exploit system coherences and is a 'greedy' strategy, in which the purity is increased maximally at each instant.Comment: 9 pages, 3 fig

Multiple-spin coherence transfer in linear Ising spin chains and beyond: numerically-optimized pulses and experiments

We study multiple-spin coherence transfers in linear Ising spin chains with nearest neighbor couplings. These constitute a model for efficient information transfers in future quantum computing devices and for many multi-dimensional experiments for the assignment of complex spectra in nuclear magnetic resonance spectroscopy. We complement prior analytic techniques for multiple-spin coherence transfers with a systematic numerical study where we obtain strong evidence that a certain analytically-motivated family of restricted controls is sufficient for time-optimality. In the case of a linear three-spin system, additional evidence suggests that prior analytic pulse sequences using this family of restricted controls are time-optimal even for arbitrary local controls. In addition, we compare the pulse sequences for linear Ising spin chains to pulse sequences for more realistic spin systems with additional long-range couplings between non-adjacent spins. We experimentally implement the derived pulse sequences in three and four spin systems and demonstrate that they are applicable in realistic settings under relaxation and experimental imperfections-in particular-by deriving broadband pulse sequences which are robust with respect to frequency offsets.Comment: 11 page

Sight Distance Standards Based On Observational Data Risk Evaluation Of Passing

The paper presents an application of a reliability analysis for evaluating the risk associated with passing sight distance (PSD) standards in terms of the expected probability of noncompliance. Calculation of PSD is required to determine where drivers can safely execute passing maneuvers. Traditional PSD standards are based on deterministic, theoretical models, which are calibrated with conservative percentile values for uncertain design inputs to account for uncertainty. The PSD standards do not provide information about the risk of deviation from them. Reliability analysis is a technique that is based on limit state design and that accounts for the propagation of variability from input random parameters to the design outputs. A total of 1,098 passing maneuvers were observed on several two-lane highways in Spain; two data collection methodologies were used: external observations and an instrumented vehicle. The most significant factors affecting PSD were impeding-vehicle speed, passing-vehicle acceleration, and head-ways between impeding and passing vehicles. A uniform acceleration model described the passing-vehicle trajectory. The characterized input parameters and the passing model were used to perform a reliability analysis. The results showed the probability of noncompliance in different scenarios, defined as the proportion of cases in which the required PSD would exceed the available sight distance. American and Spanish PSD standards were evaluated. Geometric design standards presented a probability of noncompliance of about 0.15, whereas some marking standards had a probability of noncompliance exceeding 0.85. These standards may be associated with higher risk levels if they are followed by drivers. As well, PSD risk levels were not consistent for different design speeds, since they underestimated operating speed at some locationsThis paper was developed as a result of a mobility study at the University of British Columbia funded by the Erasmus Mundus Program of the European Commission under the Transatlantic Partnership for Excellence in Engineering project. The authors thank the Spanish Ministry of Economy and Competitiveness, which subsidized the research project, and the Spanish Directorate General of Traffic, Spanish Ministry of Public Works, Valencia Regional Department of Transport, and Valencia province road department for their collaboration during the field study.Llorca Garcia, C.; Moreno Chou, AT.; Sayed, T.; García García, A. (2014). Sight Distance Standards Based On Observational Data Risk Evaluation Of Passing. Transportation research record. 2404:18-26. doi:10.3141/2404-03S18262404Ismail, K., & Sayed, T. (2009). Risk-based framework for accommodating uncertainty in highway geometric design. Canadian Journal of Civil Engineering, 36(5), 743-753. doi:10.1139/l08-146Ismail, K., & Sayed, T. (2010). Risk-Based Highway Design. Transportation Research Record: Journal of the Transportation Research Board, 2195(1), 3-13. doi:10.3141/2195-01Richl, L., & Sayed, T. (2006). Evaluating the Safety Risk of Narrow Medians Using Reliability Analysis. Journal of Transportation Engineering, 132(5), 366-375. doi:10.1061/(asce)0733-947x(2006)132:5(366)Harwood, D. W., Gilmore, D. K., & Richard, K. R. (2010). Criteria for Passing Sight Distance for Roadway Design and Marking. Transportation Research Record: Journal of the Transportation Research Board, 2195(1), 36-46. doi:10.3141/2195-05Wang, Y., & Cartmell, M. P. (1998). New Model for Passing Sight Distance on Two-Lane Highways. Journal of Transportation Engineering, 124(6), 536-545. doi:10.1061/(asce)0733-947x(1998)124:6(536)Polus, A., Livneh, M., & Frischer, B. (2000). Evaluation of the Passing Process on Two-Lane Rural Highways. Transportation Research Record: Journal of the Transportation Research Board, 1701(1), 53-60. doi:10.3141/1701-07Llorca, C., & García, A. (2011). Evaluation of Passing Process on Two-Lane Rural Highways in Spain with New Methodology Based on Video Data. Transportation Research Record: Journal of the Transportation Research Board, 2262(1), 42-51. doi:10.3141/2262-05Carlson, P., Miles, J., & Johnson, P. (2006). Daytime High-Speed Passing Maneuvers Observed on Rural Two-Lane, Two-Way Highway: Findings and Implications. Transportation Research Record: Journal of the Transportation Research Board, 1961, 9-15. doi:10.3141/1961-02Llorca, C., Moreno, A. T., García, A., & Pérez-Zuriaga, A. M. (2013). Daytime and Nighttime Passing Maneuvers on a Two-Lane Rural Road in Spain. Transportation Research Record: Journal of the Transportation Research Board, 2358(1), 3-11. doi:10.3141/2358-01Easa, S. M. (1993). Reliability‐Based Design of Intergreen Interval at Traffic Signals. Journal of Transportation Engineering, 119(2), 255-271. doi:10.1061/(asce)0733-947x(1993)119:2(255)Selvanathan, E. A., & Selvanathan, S. (1994). The demand for transport and communication in the United Kingdom and Australia. Transportation Research Part B: Methodological, 28(1), 1-9. doi:10.1016/0191-2615(94)90027-2Easa, S. M. (2000). Reliability Approach to Intersection Sight Distance Design. Transportation Research Record: Journal of the Transportation Research Board, 1701(1), 42-52. doi:10.3141/1701-06Ibrahim, S. E.-B., & Sayed, T. (2011). Developing safety performance functions incorporating reliability-based risk measures. Accident Analysis & Prevention, 43(6), 2153-2159. doi:10.1016/j.aap.2011.06.006Khoury, J. E., & Hobeika, A. G. (2007). Assessing the Risk in the Design of Passing Sight Distances. Journal of Transportation Engineering, 133(6), 370-377. doi:10.1061/(asce)0733-947x(2007)133:6(370)Khoury, J. E., & Hobeika, A. G. (2012). Integrated Stochastic Approach for Risk and Service Estimation: Passing Sight Distance Application. Journal of Transportation Engineering, 138(5), 571-579. doi:10.1061/(asce)te.1943-5436.0000366Kim, S., & Choi, J. (2013). Effects of preceding geometric conditions on operating speed consistency of multilane highways. Canadian Journal of Civil Engineering, 40(6), 528-536. doi:10.1139/cjce-2012-005

A spontaneous increase in intracellular Ca2+ in metaphase II human oocytes in vitro can be prevented by drugs targeting ATP-sensitive K+ channels

STUDY QUESTION: Could drugs targeting ATP-sensitive K+ (KATP) channels prevent any spontaneous increase in intracellular Ca2+ that may occur in human metaphase II (MII) oocytes under in vitro conditions? SUMMARY ANSWER: Pinacidil, a KATP channel opener, and glibenclamide, a KATP channel blocker, prevent a spontaneous increase in intracellular Ca2+ in human MII oocytes. WHAT IS KNOWN ALREADY: The quality of the oocyte and maintenance of this quality during in vitro processing in the assisted reproductive technology (ART) laboratory is of critical importance to successful embryo development and a healthy live birth. Maintenance of Ca2+ homeostasis is crucial for cell wellbeing and increased intracellular Ca2+ levels is a well-established indicator of cell stress. STUDY DESIGN, SIZE, DURATION: Supernumerary human oocytes (n = 102) collected during IVF/ICSI treatment that failed to fertilize were used from October 2013 to July 2015. All experiments were performed on mature (MII) oocytes. Dynamics of intracellular Ca2+ levels were monitored in oocytes in the following experimental groups: (i) Control, (ii) Dimethyl sulfoxide (DMSO; used to dissolve pinacidil, glibenclamide and 2,4-Dinitrophenol (DNP)), (iii) Pinacidil, (iv) Glibenclamide, (v) DNP: an inhibitor of oxidative phosphorylation, (vi) Pinacidil and DNP and (vii) Glibenclamide and DNP. PARTICIPANTS/MATERIALS/SETTINGS/METHODS: Oocytes were collected under sedation as part of routine treatment at an assisted conception unit from healthy women (mean ± SD) age 34.1 ± 0.6 years, n = 41. Those surplus to clinical use were donated for research. Oocytes were loaded with Fluo-3 Ca2+-sensitive dye, and monitored by laser confocal microscopy for 2 h at 10 min intervals. Time between oocyte collection and start of Ca2+ monitoring was 80.4 ± 2.1 h. MAIN RESULTS AND THE ROLE OF CHANCE: Intracellular levels of Ca2+ increased under in vitro conditions with no deliberate challenge, as shown by Fluo-3 fluorescence increasing from 61.0 ± 11.8 AU (AU = arbitrary units; n = 23) to 91.8 ± 14.0 AU (n = 19; P <0.001) after 2 h of monitoring. Pinacidil (100 µM) inhibited this increase in Ca2+ (85.3 ± 12.3 AU at the beginning of the experiment, 81.7 ± 11.0 AU at the end of the experiment; n = 13; P = 0.616). Glibenclamide (100 µM) also inhibited the increase in Ca2+ (74.7 ± 10.6 AU at the beginning and 71.8 ± 10.9 AU at the end of the experiment; n = 13; P = 0.851. DNP (100 mM) induced an increase in intracellular Ca2+ that was inhibited by glibenclamide (100 µM; n = 9) but not by pinacidil (100 µM; n = 5). LIMITATIONS, REASONS FOR CAUTION: Owing to clinical and ethical considerations, it was not possible to monitor Ca2+ in MII oocytes immediately after retrieval. MII oocytes were available for our experimentation only after unsuccessful IVF or ICSI, which was, on average, 80.4 ± 2.1 h (n = 102 oocytes) after the moment of retrieval. As the MII oocytes used here were those that were not successfully fertilized, it is possible that they may have been abnormal with impaired Ca2+ homeostasis and, furthermore, the altered Ca2+ homeostasis might have been associated solely with the protracted incubation. WIDER IMPLICATIONS OF THE FINDINGS: These results show that maintenance of oocytes under in vitro conditions is associated with intracellular increase in Ca2+, which can be counteracted by drugs targeting KATP channels. As Ca2+ homeostasis is crucial for contributing to a successful outcome of ART, these results suggest that KATP channel openers and blockers should be tested as drugs for improving success rates of ART

Efficacy of Thermotherapy to Treat Cutaneous Leishmaniasis Caused by Leishmania tropica in Kabul, Afghanistan: A Randomized, Controlled Trial

BACKGROUND: Pentavalent antimony is the agent recommended for treatment of cutaneous leishmaniasis (CL). Its use is problematic, because it is expensive and because of the potential for drug-associated adverse effects during a lengthy and painful treatment course. METHODS: We tested the efficacy of thermotherapy for the treatment of CL due to Leishmania tropica in a randomized, controlled trial in Kabul, Afghanistan. We enrolled 401 patients with a single CL lesion and administered thermotherapy using radio-frequency waves (1 treatment of ≥1 consecutive application at 50°C for 30 s) or sodium stibogluconate (SSG), administered either intralesionally (a total of 5 injections of 25 mL every 57 days, depending on lesion size) or intramuscularly (20 mg/kg daily for 21 days). RESULTS: Cure, defined as complete reepithelialization at 100 days after treatment initiation, was observed in 75 (69.4%) of 108 patients who received thermotherapy, 70 (75.3%) of 93 patients who received intralesional SSG, and 26 (44.8%) of 58 patients who received intramuscular SSG. The OR for cure with thermotherapy was 2.80 (95% confidence interval [CI], 1.455.41), compared with intramuscular SSG treatment (P = .002). No statistically significant difference was observed in the odds of cure in comparison of intralesional SSG and thermotherapy treatments. The OR for cure with intralesional SSG treatment was 3.75 (95% CI, 1.867.54), compared with intramuscular SSG treatment (P 100 days, respectively; P = .003). CONCLUSIONS: Thermotherapy is an effective, comparatively well-tolerated, and rapid treatment for CL, and it should be considered as an alternative to antimony treatment

Characterization of the Positivity of the Density Matrix in Terms of the Coherence Vector Representation

A parameterization of the density operator, a coherence vector representation, which uses a basis of orthogonal, traceless, Hermitian matrices is discussed. Using this parameterization we find the region of permissible vectors which represent a density operator. The inequalities which specify the region are shown to involve the Casimir invariants of the group. In particular cases, this allows the determination of degeneracies in the spectrum of the operator. The identification of the Casimir invariants also provides a method of constructing quantities which are invariant under {\it local} unitary operations. Several examples are given which illustrate the constraints provided by the positivity requirements and the utility of the coherence vector parameterization.Comment: significantly rewritten and submitted for publicatio