Permeabilidad de gases en membranas de zeolita ZSM-5

El trabajo incluido en el presente articulo tiene como objetivo analizar la influencia de la deposición de zeolita ZSM-5 en un tubo de alumina sobre la velocidad de transferencia de materia de distintos gases con el fin de analizar la capacidad de separación. Se ha evaluado la influencia de la presencia de zeolita, así como del caudal de gas alimentado y la temperatura a la que se desarrolla el proceso deseparación

Molecular structure and semiexternal molecular motions in 2,4,5-trichlorobenzenesulfonyl chloride, C6H2Cl4O2S

The molecular structure of 2,4,5-trichlorobenzenesulfonyl chloride has been determined by X-ray diffraction methods. The compound is orthorhombic,Aba2, witha=16.253(12),b=17.016(9),c=7.146(5) A,V=1976(5) A3,Z=8,D=1.88 kg·mm−3, (MoKα)=0.7107 A,μ=136.8 cm−1,F(000)=1104. Data were obtained at room temperature; the finalR is 0.029 for 854 independent reflections. The substituted benzene ring is planar within experimental accuracy, the dihedral angle with the C(1)-S(1)-Cl(1) plane being 66.0(5)°. The compound has normal bond lengths and angles; some short intramolecular distances account for the maintenance of the rigid benzene frame. No significatively short intermolecular distances have been found. Confirmation of the oscillatory character of the semiexternal molecular motions operating above 180 K is accounted for.Facultad de Ciencias Exacta

Determination of hemihedral twinning and initial structural analysis of crystals of the procarboxypeptidase A ternary complex

The initial structural analysis of the ternary complex of procarboxypeptidase A from hemihedrally twinned crystals diffracting up to 2.8 Å is described. Detection of twinning by different techniques is presented, including biochemical and intensity statistics approaches. The structure was initially solved using Patterson-search techniques, and the three positioned search models were used to effectively deconvolute the twinned data

Neutron diffraction structure of Y₂V₁₀O₂₈·24H₂O at 297 and 60 K

The structure of yttrium-decavanadate-24-hydrate, [Y₂V₁₀O₂₈·24H₂O], was determined by neutron diffraction at temperatures of 297 and 60 K. Space group P-1, triclinic, Z = 2; at 297 K : a = 9.36(1), b = 9.86(1), c = 23.53(3) Å, α = 98.79(2), β = 98.15(2), γ = 89.30(2), V = 2123(5); at 60 K : a = 9.19(3), b = 9.85(3), c = 23.31(12) A, α = 99.03(3), β = 98.99(6), γ = 89.39(6)°, V = 2058(13). Final R factors of 10 and 9.4% were obtained using 1955 and 1100 observed structure factors at both temperatures, respectively. The position of the 24 water molecules was determined and the characteristics of the hydrogen bonds were analyzed at both temperatures.Centro de Química Inorgánic

Structure of the Triatoma virus capsid

The members of the Dicistroviridae family are non-enveloped positive-sense single-stranded RNA (+ssRNA) viruses pathogenic to beneficial arthropods as well as insect pests of medical importance. Triatoma virus (TrV), a member of this family, infects several species of triatomine insects (popularly named kissing bugs), which are vectors for human trypanosomiasis, more commonly known as Chagas disease. The potential use of dicistroviruses as biological control agents has drawn considerable attention in the past decade, and several viruses of this family have been identified, with their targets covering honey bees, aphids and field crickets, among others. Here, the crystal structure of the TrV capsid at 2.5 14;Å resolution is reported, showing that as expected it is very similar to that of Cricket paralysis virus (CrPV). Nevertheless, a number of distinguishing structural features support the introduction of a new genus (Triatovirus; type species TrV) under the Dicistroviridae family. The most striking differences are the absence of icosahedrally ordered VP4 within the infectious particle and the presence of prominent projections that surround the fivefold axis. Furthermore, the structure identifies a second putative autoproteolytic DDF motif in protein VP3, in addition to the conserved one in VP1 which is believed to be responsible for VP0 cleavage during capsid maturation. The potential meaning of these new findings is discussed.Centro de Estudios Parasitológicos y de Vectore

Three-dimensional Structure of L-2-Haloacid Dehalogenase from Xanthobacter autotrophicus GJ10 Complexed with the Substrate-analogue Formate

The L-2-haloacid dehalogenase from the 1,2-dichloroethane degrading bacterium Xanthobacter autotrophicus GJ10 catalyzes the hydrolytic dehalogenation of small L-2-haloalkanoic acids to yield the corresponding D-2-hydroxyalkanoic acids. Its crystal structure was solved by the method of multiple isomorphous replacement with incorporation of anomalous scattering information and solvent flattening, and was refined at 1.95-Å resolution to an R factor of 21.3%. The three-dimensional structure is similar to that of the homologous L-2-haloacid dehalogenase from Pseudomonas sp. YL (1), but the X. autotrophicus enzyme has an extra dimerization domain, an active site cavity that is completely shielded from the solvent, and a different orientation of several catalytically important amino acid residues. Moreover, under the conditions used, a formate ion is bound in the active site. The position of this substrate-analogue provides valuable information on the reaction mechanism and explains the limited substrate specificity of the Xanthobacter L-2-haloacid dehalogenase.

Elucidating the selenium and arsenic metabolic pathways following exposure to the non-hyperaccumulating Chlorophytum comosum, spider plant

Although many studies have investigated the metabolism of selenium and arsenic in hyperaccumulating plants for phytoremediation purposes, few have explored non-hyperaccumulating plants as a model for general contaminant exposure to plants. In addition, the result of simultaneous supplementation with selenium and arsenic has not been investigated in plants. In this study, Chlorophytum comosum, commonly known as the spider plant, was used to investigate the metabolism of selenium and arsenic after single and simultaneous supplementation. Size exclusion and ion-pairing reversed phase liquid chromatography were coupled to an inductively coupled plasma mass spectrometer to obtain putative metabolic information of the selenium and arsenic species in C. comosum after a mild aqueous extraction. The chromatographic results depict that selenium and arsenic species were sequestered in the roots and generally conserved upon translocation to the leaves. The data suggest that selenium was directly absorbed by C. comosum roots when supplemented with SeVI, but a combination of passive and direct absorption occurred when supplemented with SeIV due to the partial oxidation of SeIV to SeVI in the rhizosphere. Higher molecular weight selenium species were more prevalent in the roots of plants supplemented with SeIV, but in the leaves of plants supplemented with SeVI due to an increased translocation rate. When supplemented as AsIII, arsenic is proposed to be passively absorbed as AsIII and partially oxidized to AsV in the plant root. Although total elemental analysis demonstrates a selenium and arsenic antagonism, a compound containing selenium and arsenic was not present in the general aqueous extract of the plant

Structure of the hDmc1-ssDNA filament reveals the principles of its architecture

In eukaryotes, meiotic recombination is a major source of genetic diversity, but its defects in humans lead to abnormalities such as Down's, Klinefelter's and other syndromes. Human Dmc1 (hDmc1), a RecA/Rad51 homologue, is a recombinase that plays a crucial role in faithful chromosome segregation during meiosis. The initial step of homologous recombination occurs when hDmc1 forms a filament on single-stranded (ss) DNA. However the structure of this presynaptic complex filament for hDmc1 remains unknown. To compare hDmc1-ssDNA complexes to those known for the RecA/Rad51 family we have obtained electron microscopy (EM) structures of hDmc1-ssDNA nucleoprotein filaments using single particle approach. The EM maps were analysed by docking crystal structures of Dmc1, Rad51, RadA, RecA and DNA. To fully characterise hDmc1-DNA complexes we have analysed their organisation in the presence of Ca2+, Mg2+, ATP, AMP-PNP, ssDNA and dsDNA. The 3D EM structures of the hDmc1-ssDNA filaments allowed us to elucidate the principles of their internal architecture. Similar to the RecA/Rad51 family, hDmc1 forms helical filaments on ssDNA in two states: extended (active) and compressed (inactive). However, in contrast to the RecA/Rad51 family, and the recently reported structure of hDmc1-double stranded (ds) DNA nucleoprotein filaments, the extended (active) state of the hDmc1 filament formed on ssDNA has nine protomers per helical turn, instead of the conventional six, resulting in one protomer covering two nucleotides instead of three. The control reconstruction of the hDmc1-dsDNA filament revealed 6.4 protein subunits per helical turn indicating that the filament organisation varies depending on the DNA templates. Our structural analysis has also revealed that the N-terminal domain of hDmc1 accomplishes its important role in complex formation through domain swapping between adjacent protomers, thus providing a mechanistic basis for coordinated action of hDmc1 protomers during meiotic recombination

MultiFit: a web server for fitting multiple protein structures into their electron microscopy density map

Advances in electron microscopy (EM) allow for structure determination of large biological assemblies at increasingly higher resolutions. A key step in this process is fitting multiple component structures into an EM-derived density map of their assembly. Here, we describe a web server for this task. The server takes as input a set of protein structures in the PDB format and an EM density map in the MRC format. The output is an ensemble of models ranked by their quality of fit to the density map. The models can be viewed online or downloaded from the website. The service is available at; http://salilab.org/multifit/ and http://bioinfo3d.cs.tau.ac.il/