3,441 research outputs found

    GFRP - FAILURE CHARACTERISTICS ANALYSIS

    Get PDF
    The objective of this paper is to predict the ultimate failure load and also is to characterize the failure modes in GFRP composite coupons using Multi linear regression. IBM SSPS20 version is used to predict the ultimate failure load using Multi linear regression with failure loads as dependent variable and the load range of 10kg each and its corresponding hits as independent variable. The three point bending test was conducted on the GFRP composite coupons till failure of the GFRP composite coupons. Based on the effect of various failure modes the ultimate failures of the specimen were also predicted by means of multi linear regression method. Â

    Fish biomass estimation by calibrating the echointegrator deflection against catch data

    Get PDF
    Acoustic survey for fish resources was conducted using echosounder (EK-400) with echointegrator (QD). The echointegrator coupled with echosounder sums-up the echo signal received. The sum of the echo signal received per nautical mile covered is an index of the quantum of fish recorded and therefore a measure of the relative density of fish in surveyed area. It is converted into absolute biomass using the calibrarion constant obtained by correlating the trawl catch data against the echointegrator reading corresponding to the opening of the net. The calibration constant thus arrived at was 1327 kg/n.mile corresponding to 1 mm integrator deflection per nautical mile covered

    Salinity changes in the estuary and the coastal sea adjacent to the portmouth at Cochin

    Get PDF
    The article deals with the details of salinity changes in the Cochin estuary and its influence and interrelations with the Vembanad lake

    Hydrographic features off northeast coast and Andaman - Nicobar Islands in relation to demersal finfish resources

    Get PDF
    Temperature varied from 17.6 to 28.5°C, salinity values from 32.12 to 35.21 x 10"" and dissolved oxygen from 0.8 to 4.41 ml/1. No identifiable relationship could be established between these three parameters and the total fish abundance, probably because the catch was made up of many species having different requirements. Higher abundance of trawl catches was from January to May when bottom water temperature was relatively low. The highest level of abundance of 2764 kg/hr in February 1989 was recorded when the parameters were 26°C, 33.6 x 10" and 2.71 ml/1; and the lowest level of 43.2 kg/hr in July 1988 was when the parameters were 25.3°C, 34.48 x 10'^ and 1.6 ml/1

    Diethyl [(2-bromo­anilino)(1,3-diphenyl-1H-pyrazol-4-yl)meth­yl]phospho­nate

    Get PDF
    In the title compound, C26H27BrN3O3P, the central pyrazole ring forms a dihedral angle of 71.7 (2)° with the bromo­phenyl ring. In the crystal, mol­ecules are linked by pairs of N—H⋯O hydrogen bonds, forming inversion dimers with R 2 2(10) ring motifs. Four C atoms of the 3-phenyl ring are disordered over two sets of sites [site occupancies = 0.745 (6) and 0.225 (6)]

    Polylactic acid/nano chitosan composite fibers and their morphological, physical characterization for the removal of cadmium(II) from water

    Get PDF
    This work discusses the fabrication of polylactic acid (PLA)/nano chitosan (nCHS) composite fibers by electrospinning method for Cd2+ metal ion adsorption from water. Here nCHS was synthesized by ionic gelation method and which is used as a reinforcement for PLA. The scanning electron microscopic analysis revealed that the addition 0.1 wt% nCHS has decreased the fiber diameter as well as the secondary pore size and hence imparted unique properties to electrospun composite fibers. The positive zeta potential values for the composites indicated their higher stability, though; the inclusion of nCHS reduced the crystallinity of the neat membranes. The contact angle measurements showed that the hydrophilicity of the composite was increased up to 0.1 wt% nCHS, and hence the surface energy was increased. Inverse gas chromatography results suggested that the basic character of the composites has intensified with the increase in nCHS addition. The adsorption capacity of the neat electrospun PLA and PLA–nCHS composites for Cd2+ ions were investigated and studies revealed that adsorption capacity of the composite was two times faster (approximately 70%) in comparison with neat PLA fibers. The increase in surface area as well as presence nCHS improved the adsorption capacity of the electrospun membrane.info:eu-repo/semantics/publishedVersio
    corecore