69 research outputs found
Field dependence of the electronic phase separation in Pr0.67Ca0.33MnO3 by small angle magnetic neutron scattering
We have studied by small angle neutron scattering the evolution induced by
the application of magnetic field of the coexistence of ferromagnetism (F) and
antiferromagnetism (AF) in a crystal of PrCaMnO. The
results are compared to magnetic measurements which provide the evolution of
the ferromagnetic fraction. These results show that the growth of the
ferromagnetic phase corresponds to an increase of the thickness of the
ferromagnetic ''cabbage'' sheets
Microphase separation in Pr0.67Ca0.33MnO3 by small angle neutron scattering
We have evidenced by small angle neutron scattering at low temperature the
coexistence of ferromagnetism (F) and antiferromagnetism (AF) in
Pr0.67Ca0.33MnO3. The results are compared to those obtained in
Pr0.80Ca0.20MnO3 and Pr0.63Ca0.37MnO3, which are F and AF respectively.
Quantitative analysis shows that the small angle scattering is not due to a
mesoscopic mixing but to a nanoscopic electronic and magnetic ''red cabbage''
structure, in which the ferromagnetic phase exists in form of thin layers in
the AF matrix (stripes or 2D ''sheets'').Comment: 4 figure
Large area Al₂O₃–Au raspberry-like nanoclusters from iterative block-copolymer self-assembly
In the field of functional nanomaterials, core–satellite nanoclusters have recently elicited great interest due to their unique optoelectronic properties. However, core–satellite synthetic routes to date are hampered by delicate and multistep reaction conditions and no practical method has been reported for the ordering of these structures onto a surface monolayer. Herein we show a reproducible and simplified thin film process to fabricate bimetallic raspberry nanoclusters using block copolymer (BCP) lithography. The fabricated inorganic raspberry nanoclusters consisted of a ∼36 nm alumina core decorated with ∼15 nm Au satellites after infusing multilayer BCP nanopatterns. A series of cylindrical BCPs with different molecular weights allowed us to dial in specific nanodot periodicities (from 30 to 80 nm). Highly ordered BCP nanopatterns were then selectively infiltrated with alumina and Au species to develop multi-level bimetallic raspberry features. Microscopy and X-ray reflectivity analysis were used at each fabrication step to gain further mechanistic insights and understand the infiltration process. Furthermore, grazing-incidence small-angle X-ray scattering studies of infiltrated films confirmed the excellent order and vertical orientation over wafer scale areas of Al2O3/Au raspberry nanoclusters. We believe our work demonstrates a robust strategy towards designing hybrid nanoclusters since BCP blocks can be infiltrated with various low cost salt-based precursors. The highly controlled nanocluster strategy disclosed here could have wide ranging uses, in particular for metasurface and optical based sensor applications
Microstructure formation in electrodeposited Co-Cu/Cu multilayers with GMR effect: influence of current density during the magnetic layer deposition
The influence of the current density applied during the deposition of the magnetic layers on the microstructure formation in electrodeposited Co-Cu/Cu multilayers and on their giant magnetoresistance (GMR) was investigated using a combination of magnetoresistance measurements, wide-angle and small-angle X-ray scattering, high-resolution transmission electron microscopy, atomic force microscopy and chemical analysis. The magnetoresistance measurements revealed that a reduction of the current density stimulates a transition from the formation of the magnetic layers with predominantly ferromagnetic character to the formation of superparamagnetic regions. As based on electrochemical considerations, it was supposed that such a change in the magnetic properties can be caused by an increased amount of Cu codeposited with Co at low current densities. It turned out from the structural studies that a pronounced segregation of Co and Cu occurs at low current densities. In accordance with their very low mutual solubility at room temperature, no atomic scale intermixing of Co and Cu could be detected. The segregation of Cu and Co was related to the fragmentation of the magnetic layers, to the enhancement of the local lattice strains, to the increase of the interface corrugations, to the partial loss of the multilayer periodicity and finally to the formation of Co precipitates in the Cu matrix
Quantitative plane-resolved crystal growth and dissolution kinetics by coupling in situ optical microscopy and diffusion models : the case of salicylic acid in aqueous solution
The growth and dissolution kinetics of salicylic acid crystals are investigated in situ by focusing on individual microscale crystals. From a combination of optical microscopy and finite element method (FEM) modeling, it was possible to obtain a detailed quantitative picture of dissolution and growth dynamics for individual crystal faces. The approach uses real-time in situ growth and dissolution data (crystal size and shape as a function of time) to parametrize a FEM model incorporating surface kinetics and bulk to surface diffusion, from which concentration distributions and fluxes are obtained directly. It was found that the (001) face showed strong mass transport (diffusion) controlled behavior with an average surface concentration close to the solubility value during growth and dissolution over a wide range of bulk saturation levels. The (1Ì…10) and (110) faces exhibited mixed mass transport/surface controlled behavior, but with a strong diffusive component. As crystals became relatively large, they tended to exhibit peculiar hollow structures in the end (001) face, observed by interferometry and optical microscopy. Such features have been reported in a number of crystals, but there has not been a satisfactory explanation for their origin. The mass transport simulations indicate that there is a large difference in flux across the crystal surface, with high values at the edge of the (001) face compared to the center, and this flux has to be redistributed across the (001) surface. As the crystal grows, the redistribution process evidently can not be maintained so that the edges grow at the expense of the center, ultimately creating high index internal structures. At later times, we postulate that these high energy faces, starved of material from solution, dissolve and the extra flux of salicylic acid causes the voids to close
Shear induced instabilities in layered liquids
Motivated by the experimentally observed shear-induced destabilization and
reorientation of smectic A like systems, we consider an extended formulation of
smectic A hydrodynamics. We include both, the smectic layering (via the layer
displacement u and the layer normal p) and the director n of the underlying
nematic order in our macroscopic hydrodynamic description and allow both
directions to differ in non equilibrium situations. In an homeotropically
aligned sample the nematic director does couple to an applied simple shear,
whereas the smectic layering stays unchanged. This difference leads to a finite
(but usually small) angle between n and p, which we find to be equivalent to an
effective dilatation of the layers. This effective dilatation leads, above a
certain threshold, to an undulation instability of the layers. We generalize
our earlier approach [Rheol. Acta, vol.39(3), 15] and include the cross
couplings with the velocity field and the order parameters for orientational
and positional order and show how the order parameters interact with the
undulation instability. We explore the influence of various material parameters
on the instability. Comparing our results to recent experiments and molecular
dynamic simulations, we find a good qualitative agreement.Comment: 15 pages, 12 figures, accepted for publication in PR
Small-angle neutron scattering from multilamellar lipid bilayers: Theory, model, and experiment
Analysis of temperature-dependent characteristics of a 4H-SiC metal-semiconductor-metal ultraviolet photodetector
Simple scoring system to predict in-hospital mortality after surgery for infective endocarditis
BACKGROUND:
Aspecific scoring systems are used to predict the risk of death postsurgery in patients with infective endocarditis (IE). The purpose of the present study was both to analyze the risk factors for in-hospital death, which complicates surgery for IE, and to create a mortality risk score based on the results of this analysis.
METHODS AND RESULTS:
Outcomes of 361 consecutive patients (mean age, 59.1\ub115.4 years) who had undergone surgery for IE in 8 European centers of cardiac surgery were recorded prospectively, and a risk factor analysis (multivariable logistic regression) for in-hospital death was performed. The discriminatory power of a new predictive scoring system was assessed with the receiver operating characteristic curve analysis. Score validation procedures were carried out. Fifty-six (15.5%) patients died postsurgery. BMI >27 kg/m2 (odds ratio [OR], 1.79; P=0.049), estimated glomerular filtration rate 55 mm Hg (OR, 1.78; P=0.032), and critical state (OR, 2.37; P=0.017) were independent predictors of in-hospital death. A scoring system was devised to predict in-hospital death postsurgery for IE (area under the receiver operating characteristic curve, 0.780; 95% CI, 0.734-0.822). The score performed better than 5 of 6 scoring systems for in-hospital death after cardiac surgery that were considered.
CONCLUSIONS:
A simple scoring system based on risk factors for in-hospital death was specifically created to predict mortality risk postsurgery in patients with IE
- …