10,136 research outputs found
Increased tolerance to humans among disturbed wildlife.
Human disturbance drives the decline of many species, both directly and indirectly. Nonetheless, some species do particularly well around humans. One mechanism that may explain coexistence is the degree to which a species tolerates human disturbance. Here we provide a comprehensive meta-analysis of birds, mammals and lizards to investigate species tolerance of human disturbance and explore the drivers of this tolerance in birds. We find that, overall, disturbed populations of the three major taxa are more tolerant of human disturbance than less disturbed populations. The best predictors of the direction and magnitude of bird tolerance of human disturbance are the type of disturbed area (urbanized birds are more tolerant than rural or suburban populations) and body mass (large birds are more tolerant than small birds). By identifying specific features associated with tolerance, these results guide evidence-based conservation strategies to predict and manage the impacts of increasing human disturbance on birds
Thermal noise in half infinite mirrors with non-uniform loss: a slab of excess loss in a half infinite mirror
We calculate the thermal noise in half-infinite mirrors containing a layer of
arbitrary thickness and depth made of excessively lossy material but with the
same elastic material properties as the substrate. For the special case of a
thin lossy layer on the surface of the mirror, the excess noise scales as the
ratio of the coating loss to the substrate loss and as the ratio of the coating
thickness to the laser beam spot size. Assuming a silica substrate with a loss
function of 3x10-8 the coating loss must be less than 3x10-5 for a 6 cm spot
size and a 7 micrometers thick coating to avoid increasing the spectral density
of displacement noise by more than 10%. A similar number is obtained for
sapphire test masses.Comment: Passed LSC (internal) review. Submitted to Phys. Rev. D. (5/2001)
Replacement: Minor typo in Eq. 17 correcte
Quantitative Evaluation of Solidification Brittleness of Weld Metal during Solidification by In-situ Observation and Measurement (Report V) : Correlation between Critical Strain Rate and Critical Deformation Rate Required for Solidification Crack Initiation(Materials, Metallugy & Weldability)
Lubrication effects on the flow of wet granular materials
We investigate the dynamics of a partially saturated grain-liquid mixture
with a rotating drum apparatus. The drum is partially filled with the mixture
and then rotated about its horizontal axis. We focus on the continous
avalanching regime and measure the impact of volume fraction and viscosity of
the liquid on the dynamic surface angle. The inclination angle of the surface
is observed to increase sharply to a peak and then decrease as a function of
liquid volume fraction. The height of the peak is observed to increase with
rotation rate. For higher liquid volume fractions, the inclination angle of the
surface can decrease with viscosity before increasing. The viscosity where the
minima occurs decreases with the rotation rate of the drum. Limited
measurements of the flow depth were made, and these were observed to show only
fractional changes with volume fraction and rotation speeds. We show that the
qualitative features of our observations can be understood by analyzing the
effect of lubrication forces on the timescale over which particles come in
contact.Comment: 7 pages, 8 figure
Dust Size Growth and Settling in a Protoplanetary Disk
We have studied dust evolution in a quiescent or turbulent protoplanetary
disk by numerically solving coagulation equation for settling dust particles,
using the minimum mass solar nebular model. As a result, if we assume an
ideally quiescent disk, the dust particles settle toward the disk midplane to
form a gravitationally unstable layer within 2x10^3 - 4x10^4 yr at 1 - 30 AU,
which is in good agreement with an analytic calculation by Nakagawa, Sekiya, &
Hayashi (1986) although they did not take into account the particle size
distribution explicitly. In an opposite extreme case of a globally turbulent
disk, on the other hand, the dust particles fluctuate owing to turbulent motion
of the gas and most particles become large enough to move inward very rapidly
within 70 - 3x10^4 yr at 1 - 30 AU, depending on the strength of turbulence.
Our result suggests that global turbulent motion should cease for the
planetesimal formation in protoplanetary disks.Comment: 27 pages, 8 figures, accepted for publication in the Ap
Assessment of the Potential Impact and Cost-effectiveness of Self-Testing for HIV in Low-Income Countries.
Studies have demonstrated that self-testing for human immunodeficiency virus (HIV) is highly acceptable among individuals and could allow cost savings, compared with provider-delivered HIV testing and counseling (PHTC), although the longer-term population-level effects are uncertain. We evaluated the cost-effectiveness of introducing self-testing in 2015 over a 20-year time frame in a country such as Zimbabwe
Experimental evidence of shock mitigation in a Hertzian tapered chain
We present an experimental study of the mechanical impulse propagation
through a horizontal alignment of elastic spheres of progressively decreasing
diameter , namely a tapered chain. Experimentally, the diameters of
spheres which interact via the Hertz potential are selected to keep as close as
possible to an exponential decrease, , where the
experimental tapering factor is either ~% or ~%.
In agreement with recent numerical results, an impulse initiated in a
monodisperse chain (a chain of identical beads) propagates without shape
changes, and progressively transfer its energy and momentum to a propagating
tail when it further travels in a tapered chain. As a result, the front pulse
of this wave decreases in amplitude and accelerates. Both effects are
satisfactorily described by the hard spheres approximation, and basically, the
shock mitigation is due to partial transmissions, from one bead to the next, of
momentum and energy of the front pulse. In addition when small dissipation is
included, a better agreement with experiments is found. A close analysis of the
loading part of the experimental pulses demonstrates that the front wave adopts
itself a self similar solution as it propagates in the tapered chain. Finally,
our results corroborate the capability of these chains to thermalize
propagating impulses and thereby act as shock absorbing devices.Comment: ReVTeX, 7 pages with 6 eps, accepted for Phys. Rev. E (Related papers
on http://www.supmeca.fr/perso/jobs/
Investigation of the effects of notch width on eddy current response and comparison of signals from notches and cracks
This paper reports on work conducted to investigate the effect that electrical discharge machining (EDM) notch width has on the eddy current (EC) signal as a function of coil drive frequency. The notch results are also compared to EC signals from laboratory‐grown fatigue cracks. This study builds upon previous work with titanium, Inconel and aluminum materials where the signal amplitude was shown to decrease, as expected, as the notch width decreases. The trend was captured well by numerical results and this allowed estimates to be made about the signals from idealized “zero‐width” notches. The results indicated that the signal reduction factor from a 0.127 mm (0.005 inch) wide, rectangular notch to a theoretical zero‐width semi‐elliptical notch of the same size ranged from 25 to 42% for low conductivity materials when data was collected at 2 MHz. For aluminum, the difference between signals from 0.127 mm wide notches and estimated signals for zero‐width notches was approximately 50%. However, 2 MHz is an uncommonly high frequency for inspecting aluminum alloys so additional work was necessary to investigate the notch width effect at lower frequencies. This study sought to determine how the notch‐width effect changed as a function of frequency for high conductivity materials such as aluminum
[CII] emission and star formation in the spiral arms of M31
The CII 158 microns line is the most important coolant of the interstellar
medium in galaxies but substantial variations are seen from object to object.
The main source of the emission at a galactic scale is still poorly understood.
Previous studies of the CII emission in galaxies have a resolution of several
kpc or more so the observed emission is an average of different ISM components.
The aim of this work is to study, for the first time, the CII emission at the
scale of a spiral arm. We want to investigate the origin of this line and its
use as a tracer of star formation. We present CII and OI observations of a
segment of a spiral arm of M~31 using the Infrared Space Observatory. The CII
emission is compared with tracers of neutral gas (CO, HI) and star formation
(H\alpha, Spitzer 24 mu.) The similarity of the CII emission with the Ha and 24
mu images is striking when smoothed to the same resolution, whereas the
correlation with the neutral gas is much weaker. The CII cooling rate per H
atom increases dramatically from ~2.7e-26 ergs/s/atom in the border of the map
to ~ 1.4e-25 ergs/s/atom in the regions of star formation. The CII/FIR(42-122)
ratio is almost constant at 2%, a factor 3 higher than typically quoted.
However, we do not believe that M~31 is unusual. Rather, the whole-galaxy
fluxes used for the comparisons include the central regions where the CII/FIR
ratio is known to be lower and the resolved observations neither isolate a
spiral arm nor include data as far out in the galactic disk as the observations
presented here. A fit to published PDR models yields a plausible average
solution of G_0~100 and n~3000 for the PDR emission in the regions of star
formation in the arm of M31.Comment: 8 pages, 5 figures. To be published by A&A. Low quality figures. High
quality version in http://www.obs.u-bordeaux1.fr/Radio/NRodriguez/out/m31.pd
- …