Improved fracture toughness corrosion-resistant bearing material

A development program was performed to establish whether a corrosion-resistant bearing material, such as a 14Cr steel, could be modified to allow carburization, thereby providing the excellent fracture toughness characteristics feasible with this process. The alloy selected for investigation was AMS 5749. Several modifications were made including the addition of a small amount of nickel for austenite stabilization. While some promising results were achieved, the primary objective of an acceptable combination of case hardness and microstructure was not attained. Because the high chromium content presents a serious problem in achieving a viable carburizing cycle, a number of experimental steels having lower chromium contents (8 to 12%) were produced in laboratory quantities and evaluated. The results were basically the same as those initially obtained with the modified AMS 5749. Corrosion tests were performed on AMS 5749, AISI M50, and 52100 bearing steels as well as some of the lower chromium steels. These tests showed that a reduced chromium level (10 to 12%) provided essentially the same corrosion protection as the 14Cr steels

Bearing fatigue investigation 3

The operating characteristics of large diameter rolling-element bearings in the ultra high speed regimes expected in advanced turbine engines for high performance aircraft were investigated. A high temperature lubricant, DuPont Krytox 143 AC, was evaluated at bearing speeds to 3 million DN. Compared to the results of earlier, similar tests using a MIL-L-23699 (Type II) lubricant, bearings lubricated with the high density Krytox fluid showed significantly higher power requirements. Additionally, short bearing lives were observed when this fluid was used with AISI M50 bearings in an air atmosphere. The primary mode of failure was corrosion initiated surface distress (fatigue) on the raceways. The potential of a case-carburized bearing to sustain a combination of high-tangential and hertzian stresses without experiencing race fracture was also investigated. Limited full scale bearing tests of a 120 mm bore ball bearing at a speed of 25,000 rpm (3 million DN) indicated that a carburized material could sustain spalling fatigue without subsequent propagation to fracture. Planned life tests of the carburized material had to be aborted, however, because of apparent processing-induced material defects

Corrosion of simulated bearing components of three bearing steels in the presence of chloride-contaminated lubricant

Corrosion tests were run with AISI 52100, AISI M-50 and AMS 5794 under conditions that simulate the crevice corrosion found in aircraft ball and roller bearings rejected at overhaul for corrosion. Test specimens were fabricated that simulated the contacts of balls or rollers and the raceways. Corrosion cells were assembled in the presence of a lubricant contaminated with water and chloride ions. The cell was then thermally cycled between 339 K (150 F) and 276 K (37 F). The corrosion observed after 14 cycles was that of crevice and pitting corrosion typically found in aircraft bearings. AMS 5749 showed a very slight amount of corrosion. No appreciable differences were noted between AISI 52100 and AISI M-50, but both showed much greater corrosion than AMS 5749. The corrosion pits observed in AISI M-50 appeared to be fewer in number but generally deeper and larger than in AISI 52100

Dyons in N=4 Supersymmetric Theories and Three-Pronged Strings

We construct and explore BPS states that preserve 1/4 of supersymmetry in N=4 Yang-Mills theories. Such states are also realized as three-pronged strings ending on D3-branes. We correct the electric part of the BPS equation and relate its solutions to the unbroken abelian gauge group generators. Generic 1/4-BPS solitons are not spherically symmetric, but consist of two or more dyonic components held apart by a delicate balance between static electromagnetic force and scalar Higgs force. The instability previously found in three-pronged string configurations is due to excessive repulsion by one of these static forces. We also present an alternate construction of these 1/4-BPS states from quantum excitations around a magnetic monopole, and build up the supermultiplet for arbitrary (quantized) electric charge. The degeneracy and the highest spin of the supermultiplet increase linearly with a relative electric charge. We conclude with comments.Comment: 33 pages, two figures, LaTex, a footnote added, the figure caption of Fig.2 expanded, one more referenc

M Theory from World-Sheet Defects in Liouville String

We have argued previously that black holes may be represented in a D-brane approach by monopole and vortex defects in a sine-Gordon field theory model of Liouville dynamics on the world sheet. Supersymmetrizing this sine-Gordon system, we find critical behaviour in 11 dimensions, due to defect condensation that is the world-sheet analogue of D-brane condensation around an extra space-time dimension in M theory. This supersymmetric description of Liouville dynamics has a natural embedding within a 12-dimensional framework suggestive of F theory.Comment: 17 pages LATEX, 1 epsf figure include

A q-analog of the ADHMN construction and axisymmetric multi-instantons

In the preceding paper (Phys. Lett. B463 (1999) 257), the authors presented a q-analog of the ADHMN construction and obtained a family of anti-selfdual configurations with a parameter q for classical SU(2) Yang-Mills theory in four-dimensional Euclidean space. The family of solutions can be seen as a q-analog of the single BPS monopole preserving (anti-)selfduality. Further discussion is made on the relation to axisymmetric ansatz on anti-selfdual equation given by Witten in the late seventies. It is found that the q-exponential functions familiar in q-analysis appear as analytic functions categorizing the anti-selfdual configurations yielded by axisymmetric ansatz.Comment: 11pages, Latex2e, to appear in Journal of Physics A: Mathematical and General as a `Special Issue/Difference Equations

Modular Invariance and Uniqueness of Conformal Characters

We show that the conformal characters of various rational models of W-algebras can be already uniquely determined if one merely knows the central charge and the conformal dimensions. As a side result we develop several tools for studying representations of SL(2,Z) on spaces of modular functions. These methods, applied here only to certain rational conformal field theories, may be useful for the analysis of many others.Comment: 21 pages (AMS TeX), BONN-TH-94-16, MPI-94-6

Monopoles and Instantons on Partially Compactified D-Branes

Motivated by the recent D-brane constructions of world-volume monopoles and instantons, we study the supersymmetric SU(N) Yang-Mills theory on $S^1 \times R^{3+1}$, spontaneously broken by a Wilson loop. In addition to the usual N-1 fundamental monopoles, the N-th BPS monopole appears from the Kaluza-Klein sector. When all N monopoles are present, net magnetic charge vanishes and the solution can be reinterpreted as a Wilson-loop instanton of unit Pontryagin number. The instanton/multi-monopole moduli space is explicitly constructed, and seen to be identical to a Coulomb phase moduli space of a U(1)^N gauge theory in 2+1 dimensions related to Kronheimer's gauge theory of SU(N) type. This extends the results by Intriligator and Seiberg to the finite couplings that, in the infrared limit of Kronheimer's theory, the Coulomb phase parameterizes a centered SU(N) instanton. We also elaborate on the case of restored SU(N) symmetry.Comment: LaTex, 18pages, no figur

Free tensor multiplets and strings in spontaneously broken six-dimensional (2,0) theory

We first review the representations of the six-dimensional (2,0) superalgebra on a free tensor multiplet and on a free string. We then construct a supersymmetric Lagrangian describing a free tensor multiplet. (It also includes a decoupled anti self-dual part of the three-form field strength.) This field theory is then rewritten in variables appropriate for analyzing a situation where the R-symmetry is spontaneously broken by the vacuum expectation values of the scalar moduli fields. Finally, we construct a supersymmetric and kappa-symmetric action for a free string.Comment: 15 pages, LaTe

SU(2) Calorons and Magnetic Monopoles

We investigate the self-dual Yang-Mills gauge configurations on $R^3\times S^1$ when the gauge symmetry SU(2) is broken to U(1) by the Wilson loop. We construct the explicit field configuration for a single instanton by the Nahm method and show that an instanton is composed of two self-dual monopoles of opposite magnetic charge. We normalize the moduli space metric of an instanton and study various limits of the field configuration and its moduli space metric.Comment: 17 pages, RevTex, 1 Figur